* Name (required):

  Expression ^{(Optional mood/title along with your name) Examples: (happy, sad, The Joyful, etc.) help)}

  E-mail address (required):

* Type your message here:
><font face=arial color=crimson>Shallow well? <i>Au >contraire, mon frer</i>. You are attempting to do the >impossible. Due to the limitations of atmospheric >pressure, you cannot suck water up from that depth. >Try pulling up the point a few feet. If that doesn't >work, you will have to go with a deep well setup, >which may be rather difficult with a 1.25 inch >diameter well.</font> > >>I sunk a shallow well here in Orlando Florida and am >>having problems getting water out of it. Let me >>describe my situation. I used a 5', 1 1/4" dia >>stainless steel well point designed to be driven into >>the ground. I used PVC pipe on top of the well point >>(washed down, not driven)My water level is at 19' >>below the surface. The top of the well point is at 27' >>below the surface (8' below water level). Right on top >>of the well point is a brass check valve. I can fill >>the vertical pipe with water due to the check valve in >>the bottom and obviously fill the pump before running. >>I have tried a Harbor Freight shallow well pump: >><a rel=nofollow target=_blank >>href="http://www.harborfreight.com/cpi/ctaf/displayite >m >>.taf?Itemnumber=47906">http://www.harborfreight.com/cp >i >>/ctaf/displayitem.taf?Itemnumber=47906</a> >>and a 1Hp sprinkler pump from Lowes. I have not been >>able to get water out of either of them. I know I am >>priming well, I have water in the entire system from >>the well point to the pump. >>Any help would be greatly appreciated. >> >>Thanks, >>Harry

Notice: Copies of your message may remain on this and other systems on internet. Please be respectful.