70-71 torino shaker trim ring -- jesse, 23:33:39 05/02/04 Sun(cache-mtc-ad05.proxy.aol.com/64.12.116.199)
need hood trim ring for shaker (torino),also looking for blue kick panels.
1970 thunderbird -- lee, 21:40:10 04/30/04 Fri(host-216-79-253-90.jan.bellsouth.net/216.79.253.90)
2 door hardtop. body in ex. condition runs and shifts great. the car is in columbus, ms. can send pics on request. leeloftis@bellsouth.net
Wanted: owners of the first 50 1968 cj mustangs -- JacK, 22:57:40 04/28/04 Wed(cache-mtc-ad05.proxy.aol.com/64.12.116.199)
Wanting to talk to some owners of these first 135 vin number cars.Thanks for any Leads on this.
Jack in Ga. 770-787-8838
Trade or sale / C7AE-A heads -- jack, 22:54:10 04/28/04 Wed(cache-mtc-ad05.proxy.aol.com/64.12.116.199)
I need a set of april /may 67 C7AE-A F.E Heads. Must be 14 bolt hole gt's. I have 3 earler sets with wrong dates.Will trade a set or buy out right. will sale mine outright.
Thanks Jack in Ga 770-787-8838
WANTED: 67 Mustang blank heater control -- j-a-c-k, 22:50:39 04/28/04 Wed(cache-mtc-ad05.proxy.aol.com/64.12.116.199)
Need a heater delete control and heater motor block off kit. for a 67 stang.
Thanks Jack 770-787-8838
shaker/ spoiler /interior / tilt column /for sale -- j-a-c-k, 22:47:13 04/28/04 Wed(cache-mtc-ad05.proxy.aol.com/64.12.116.199)
Please reply by e-mail asohc427@aol.com . or call 770-787-8838.
Redone 1970 Mustang 351-c shaker assembly.$1000.00.
One needing redone.$800.00.
Nos 71 Mustang rear valance.w/ex.missing tag angle.$75.00.
68-69 Mustang tilt column (only) .$350.00.
71 Mustang rear original spoiler(silver needing repaint)$200.00.
New set red 67 fastback mustang seat covers(repop)$120.00.
Many other parts. Please ask.
all plus shipping from Ga.
Thanks Jack 770-787-8838
Trans / Parts / rears for Sale -- j-a-c-k, 22:34:54 04/28/04 Wed(cache-mtc-ad05.proxy.aol.com/64.12.116.199)
Please reply by e-mail asohc427@aol.com or call 770-787-8838.
Nice 64 1/2 Mustang top loader.4-speed.$ 400.00.
Nice 65-66 mustang t-10 4-speed.$300.00.
Nice 65-70 mustang 3-speed with shifter.$60.00.
Nice RUG-AJ 69 cj torino 4-speed.300 miles/rebuild.$700.00.
62-64 Galaxie 3 speed.$40.00.
Mustang II 4-speed change over.$300.00.
Rare 67 GT 500 Big spline clutch fork with wire clip???
Rare 67 390 4-speed crossmember.???
69-70 428 4-speed cross member ???
C8OE 428 shift flywheel.$225.00.
351-w or c shift flywheel.$75.00
289 shift flywheel.$60.00.
mustang 3-speed shifter complete.$40.00.
Redone 428cj bellhousing assembly.9C12.$200.00.
Nice 411 posi 8 inch chunk(300 miles) $450.00.
Nice original 391 posi. N-case.chunk.(69 scj) $600.00.
May swap on other ford parts.
all plus shipping from Ga.
Thanks Jack 770-787-8838
F.E Related parts for Sale -- j-a-c-k, 22:29:37 04/28/04 Wed(cache-mtc-ad05.proxy.aol.com/64.12.116.199)
Please reply by e-mail asohc427@aol.com . or call 770-787-8838.
Fresh 428 scj crank 1UA..10R.-20M. $550.00.
Nice redone 428 SCJ water pump pulley.$75.00.
Many other pulleys.
1 set New edelbrock 428 alum. Heads.$1225.00.
1 new 2x4 M/R Intake.Blue thunder. $575.00.
New 390-429 crank/balancer spacer.$40.00.
New rear intake block off plate.$20.00.
May do a swap for other ford parts.
all plus shipping from Ga.
Thanks Jack 770-787-8838
1969Ford XL Fastback -- Bryan, 21:45:00 04/28/04 Wed(cache-ntc-ac03.proxy.aol.com/198.81.26.72)
For Sale 1969 Ford XL Car only has 70,000 plus miles 390/auto AM radio ICE COLD AIR! (All new R134) Car was my grandparents. My father has it now for sale. Car was garaged it whole life until recently. Car needs minor body work from a driver who should not have been driving. (get what I mean) Overall very nice car, inside like new! Also has wood rim steering wheel with rim blow ring. Asking $6000.00 Bryan 510 799 7485
Mexican Block 302 -- OkieHog, 06:49:35 04/11/04 Sun(wap2p90.dial.brightok.net/69.8.28.90)
I have a Mexican block 302 I would like to sell. Currently has C6 heads sitting on it,, but will sell just the shortblock if that is what you want.
$300.00 PS for shortblock.
OkieHog
Ford 427 sideoiler block, crank and parts for sale -- Marc, 14:10:00 04/26/04 Mon(C63107135116.acs-pitt.com/63.107.135.116)
1968 427 sideoiler block not service or marine block. Date coded 8J20 with a cast 'W' above the date. This sideoiler would have come from a Cougar GT/E, Fairlane or Shelby GT500. The block is rebuildable but may need a sleeve as the bottom of one cylinder has been damaged. The block has a window that was correctly repaired. Block magnafluxed ok. I also have a forged steel 427 crank with '$' and screw in plugs. Other parts include baffled oil pan with pickup, crank scraper, a few cams (at least one new), new main bearings, oil pump, new solid liters, rear engine gasket, pulleys, alternator brackets, and pushrods. You would need a water pump, cylinder heads, intake. I also have some NOS COBRA LEMANS valve covers (never used) and the water neck for the intake. All items should go with the engine. Best offer.
please email if interested
sundayinbelfast@yahoo.com
Wanted c7ae-a FE heads -- sabooo, 23:17:56 01/31/04 Sat(NoHost/24.229.75.117)
Looking for a pair of c7ae-a heads with date codes from Oct or Nov of '66. Email me with what you've got! Thanks in advance.
Boss 302 Hilborn Injectors 4 SALE -- Bill, 22:05:49 04/27/04 Tue(cache-rl05.proxy.aol.com/152.163.252.229)
Complete set of Boss 302 Hilborn Injectors with PG-150A pump and drive, set up for gas, $875.00 plus Shipping
Wanted- 428 Block -- Russ, 15:40:33 04/26/04 Mon(cache-dtc-ad05.proxy.aol.com/205.188.116.199)
Looking for a decent 428CJ block-email with a pic of what you have, and price..Thanks
Wanted 428 CJ Block -- Russ, 12:28:30 04/26/04 Mon(cache-dtc-ad05.proxy.aol.com/205.188.116.199)
Looking to buy a 428 CJ block..I live in SW Virginia..and I have looked at a few..and they were cheap but..thin walled..Not much meat left in the cylinders..Thanks..Russ
wanted 427 dual four tunnel port intake -- Andy joe, 12:50:57 04/25/04 Sun(c-67-168-39-231.client.comcast.net/67.168.39.231)
Wanted 427 dual four barrel tunnel port style intake anything any condition. thanks Andy 509 924-9824 0r 509 892 -1993
Ford Galaxie Parts Needed -- Roger Clow, 23:16:16 01/22/04 Thu(dialup-67.73.179.123.Dial1.Chicago1.Level3.net/67.73.179.123)
Looking for an accellerator cable for a 72 Ford Galaxie with the 429 Big Block, can anyone help?
63-64 GALAXIE 3-SPEED TRANS-$40.00 -- J-A-C-K, 14:41:59 04/24/04 Sat(cache-dtc-ad05.proxy.aol.com/205.188.116.199)
YOU COME PICK UP IN ATLANTA AREA.
THANKS JACK 770-=787-8838
Wanted: 429 parts -- Jim P., 14:12:52 04/22/04 Thu(64.83.44.2.eth2-slash-28-ric.cavtel.net/64.83.44.2)
Need a lower oil cooler bracket D0OE-B, 2 sheave water pump pulley D0OE-M and D0SE smog pump pulley.
WANTED 428 Shaker parts -- gary, 11:37:21 04/22/04 Thu(sc215019.robins.af.mil/137.244.215.19)
Looking for 428 Shaker parts, or any shaker parts, have 2 Torino shakers tops to trade or buy your parts outright.
WANTED: ORIGINAL 68 1/2 MUSTANG HOOD SCOOP -- J-A-C-K, 13:29:15 04/21/04 Wed(cache-rl05.proxy.aol.com/152.163.252.229)
Must be a real 68 1/2 scoop.
Thanks Jack 770-787-8838
WANTED: C8OF-9510-AA HOLLEY CARB -- J-A-C-K, 13:18:56 04/21/04 Wed(cache-rl05.proxy.aol.com/152.163.252.229)
Any date will work. Will pay good money for december 1967 date one.
Thanks Jack 770-787-8838
1969 Mustang GT Fastback 4 sale -- Rich, 19:01:19 04/20/04 Tue(ip68-5-204-241.oc.oc.cox.net/68.5.204.241)
Selling a 1969 Silver Jade Mustang GT, Fastback, 4spd, Air,Deluxe, console, new and everything works, super car. Always in California, needs nothing but a new owner. ON ebay this week item # 2474978164 22k very nice and rare combo over 100 pics at http://photos.yahoo.com/silverjade1969
63-64 GALAXIE SWING AWAY STEERING ASSEMBLY -- J-A-C-K, 11:54:40 04/20/04 Tue(cache-mtc-ad05.proxy.aol.com/64.12.116.199)
Its still in the 63 galaxie.every thing here to change yours over. automatic on the column. You get dash and all.$200.00 and you come take it out. Im 40 miles east of atlanta.Other 63-64 body parts.
Thanks Jack 770-787-8838
Wanted: 71-73 Mustang bucket seats -- ..., 16:05:46 04/07/04 Wed(ppp-67-119-179-197.dialup.pltn13.pacbell.net/67.119.179.197)
Let me know what you have. Thanks.
WANTED: HEH-BX TOPLOADER -- STEVEK, 07:51:04 04/13/04 Tue(cache-dtc-ad05.proxy.aol.com/205.188.116.199)
WANTED:
HEH-BX TOPLOADER w/shifter for a 66 K-code Mustang
Will consider any condition
Also-I need a console for a 66 convertible w/o a/c
FOR SALE -- FORD-GUY, 21:45:30 04/08/04 Thu(NoHost/207.218.78.144)
For sale :
5 - used magnums 14x7 - 330 +shipping
Hide away headlights W/ vacum motor and grill suport - 550 + shipping
also haveother torino parts tell me what you need?
67 Console parts -- Bryan, 18:19:15 04/06/04 Tue(cache-ntc-ac03.proxy.aol.com/198.81.26.72)
Thank you for answering my ad for left over 67 Mustang parts. I don't have an extra one. Just the one that goes with the 67 console that I have. Thanks
Wanted: '66 Steering column -- Ron, 20:31:34 04/05/04 Mon(mpclient-198.109.216.65.modempool.com/198.109.216.65)
Need steering column for a '66 Fairlane, 4-speed. Must be complete.
Wanted, BB lakewood bellhousing -- Ron, 20:28:28 04/05/04 Mon(mpclient-198.109.216.65.modempool.com/198.109.216.65)
Need Big Block Lakewood bell housing for a 427-428. Must be in excellant condition .
cobra jet scrips for shaker -- sam, 21:00:45 04/03/04 Sat(dsc06-hoi-tx-163-179-0-130.rasserver.net/163.179.0.130)
looking for good second hand cobra jet scrips for shaker
brake / clutch pedal with hanger / 66 galaxie -- Richard, 22:52:53 04/01/04 Thu(Toronto-HSE-ppp3835649.sympatico.ca/67.69.184.32)
brake / clutch with hanger for a 66 galaxie in perfect condition without wear busching
Wanted 351C Tunnel Ram -- Bill, 18:32:04 04/01/04 Thu(cache-dtc-ad05.proxy.aol.com/205.188.116.199)
I`m looking for a 351C tunnel ram reasonably priced. Prefer a Weiand but an Offy would do ok ,too. Thanks Bill
Wanted: '67 Ford 4 speed transmission tunnel cover -- Ralph Terhune, 00:36:18 04/01/04 Thu(sdn-ap-011tnnashP0425.dialsprint.net/63.189.233.171)
I'm looking for a 4 speed trans tunnel cover, shifter boot, and bezel for a 1967 Ford Galaxie bench seat car. Thanks.
70 FAIRLANE 500 & 70 TORINO FOR SALE -- JB, 17:02:50 03/31/04 Wed(NoHost/64.207.60.34)
1970 Fairlane 500(identical to 70 1/2 Falcon)-V8-auto-p/s-fact.a/c-interior redone(new headliner,door panels,carpet,
seatcovers,have new dash cover)-new tires,brakes,shocks,
dual exhaust, rebuilt transmission- good solid car-good floors-minimal rust in quarters and battery area- have extra hood-frt valance-grill pan and new replacement "cobra style" grill- complete car less engine. Also, have 1970 Torino Formalroof-V8-auto-p/s-add-on a/c-RARE factory bucket
seats w/console floor shifter-complete less engine- good
solid restorable car. Both cars plus parts $4000obo
need help -- rob chatterton, 00:39:51 03/31/04 Wed(NoHost/199.0.180.73)
i need some interior trim for a 71 mercury cyclone,along with the dash/gauge setup for a cyclone.please help me get my car back on the road.
the trim pieces i need are the floor pieces that go from the kick panels to just behind the seats,i have the sill plates,but not the trim.
the gauges are the complete-setup for the pass side of the car,the gauges mount there,but are facing the drivers side.
also,anywhere i can buy the weatherstripping for the doors?
thanx,Rob
need help -- rob chatterton, 00:29:12 03/31/04 Wed(NoHost/199.0.180.73)
i need some interior trim for a 71 mercury cyclone,along with the dash/gauge setup for a cyclone.please help me get my car back on the road.
the trim pieces i need are the floor pieces that go from the kick panels to just behind the seats,i have the sill plates,but not the trim.
the gauges are the complete-setup for the pass side of the car,the gauges mount there,but are facing the drivers side.
also,anywhere i can buy the weatherstripping for the doors?
thanx,Rob
Hooker super comp for 71-72 mustang clev. -- JC, 07:29:34 03/30/04 Tue(BELVOIR-SUN2.IERN.DISA.MIL/198.26.119.86)
One tube modified,excellent condition,$135 plus shipping from Md.
67Mustang parts -- Bryan, 10:35:25 03/27/04 Sat(cache-ntc-ac03.proxy.aol.com/198.81.26.72)
Have some new & used left over parts from a 67 Fastback
Call for needs or e mail Thanks 510 799 7485
Wanted -- Dan Kirk, 14:39:20 03/29/04 Mon(cache-rf07.proxy.aol.com/152.163.252.103)
Need 1971 torino/ranchero left and right outer grille shells, for the split style grille.
NEED A WINDSHIELD -- A-1 GLASS DEPOT, 12:30:34 03/29/04 Mon(bgp01357430bgs.albqrq01.nm.comcast.net/68.35.150.172)
I HAVE A 1960 FORD STARLINER WINDSHIELD FOR SALE. WILLING TO SHIP OUT ANY WHERE IN THE U.S. CALL (505)299-5533.
302/c4 trade for 68 tracktion loc -- richard bright, 14:43:05 03/28/04 Sun(cache-mtc-ab12.proxy.aol.com/64.12.116.76)
have a 68 302 engine with 351 heads and c-4 trans to trade for a 68 traction loc rear. for more info e-mail me. thanks rich b
have 2-- 390 std/std cranks to sell -- david, 10:05:40 12/29/03 Mon(cache-rl05.proxy.aol.com/152.163.252.229)
I have 2 std/std 390 cranks for sale $65 each + shipping from 70570 zip. neither is worn more than .001 no grooves or scratches, can be used as is after cleaning.
TRADE - Transmission HEH-AR for HEH-BX -- Mike, 20:55:29 03/27/04 Sat(c-24-4-108-127.client.comcast.net/24.4.108.127)
TRADE - Transmission HEH-AR for HEH-BX
I've got a HEH-AR installed in my 1965 Mustang it works perfectly but I'd like to find the right transmission for it. Please email if you've got a HEH-BX. Trade not necessary.
TRADE - Transmission HEH-AR for HEH-BX -- Mike, 20:53:48 03/27/04 Sat(c-24-4-108-127.client.comcast.net/24.4.108.127)
TRADE - Transmission HEH-AR for HEH-BX
I've got a HEH-AR installed in my 1965 Mustang it works perfectly but I'd like to find the right transmission for it. Please email if you've got a HEH-BX. Trade not necessary.
427 sidewinder single four intake -- Jim, 00:20:46 03/25/04 Thu(connector.propel.com/67.72.98.55)
Super nice, unmolested, 427 sidewinder intake, $550. Contact Jim at jpp427@fortunehitech.net
Wanted: 69 Mustang Coupe project in Southern US. -- Bonnie, 23:08:59 03/24/04 Wed(cache-mtc-ad12.proxy.aol.com/64.12.116.206)
Looking for solid 69 Mustang Coupe/Grande project. Can be less drivetrain, otherwise complete. Must be F, H or M code car. I will be visiting SE Tenn in late April and would like to bring something home with me. Let me know what you have! Thanks, Bonnie!
Wanted: 1963 Ford Galaxie 500 2 door body shell - Still need nice rust free body -- Ralph Terhune, 01:43:07 01/06/04 Tue(sdn-ap-005tnnashP0380.dialsprint.net/63.185.41.126)
Still need a nice rust free body shell for a '63 Ford Galaxie 500 2 door hardtop, fastback or boxtop. Thanks.
67 390 GT heads needed -- cody, 16:55:40 02/12/04 Thu(NoHost/205.232.76.153)
I am i need of a good set of 390 GT heads. If you can help please contact me. Thanks Cody
67 fairlane station wagon rear interior panels -- Paul, 17:49:05 03/22/04 Mon(cache-rl05.proxy.aol.com/152.163.252.229)
I am looking for a set of rear interior side panels for my 67 fairlane S/W. Preferably red & in very good to excellent condition.
Thanks.
WANTED: 429CJ FAN SHROUD -- STEVE, 21:36:59 03/21/04 Sun(ool-44c23a1d.dyn.optonline.net/68.194.58.29)
LOOKING FOR A 429CJ FAN SHROUD.PART # DOOE-8146-D.
THANKS,STEVE
427 Timing Pointer Needed -- Dan, 09:41:45 02/02/04 Mon(cache-mtc-ah06.proxy.aol.com/64.12.96.171)
I need a 427 Timing pointer. Good Reproduction is fine.
parting out 67 ranchero xl -- walter, 15:58:39 02/07/04 Sat(pool-141-156-46-150.res.east.verizon.net/141.156.46.150)
I am parting put a 67 ranchero xl send me a note as to what you need
703-242-8746
WH
magnums wanted 2 -15X8 -- Chris, 19:46:07 03/19/04 Fri(CPE-144-137-93-66.nsw.bigpond.net.au/144.137.93.66)
looking for 2 of 15X8 magnum wheels to suit ford. good condition only.
vacuum motor for shaker flapper and flapper -- sam, 20:18:12 03/18/04 Thu(dsc06-hoi-tx-207-221-160-90.rasserver.net/207.221.160.90)
Looking for flapper and vacuum motor for a shaker good second hand if you got one let me khow.
2-15x12 ET rims -- Rick, 19:23:33 03/18/04 Thu(px1ht.ok.shawcable.net/24.67.253.203)
tires will be dismounted, I have the 10 unilug washers. Asking 125.US obo for the pair. Im in BC,Canada, and shipping will be around 40.US per rim
351C oil pans-*2* -- Rick, 19:17:39 03/18/04 Thu(px1ht.ok.shawcable.net/24.67.253.203)
one boss 351 and one regular. Both have dents but good drain plugs. best offer plus shipping
parting out 67 ranchero -- WALTER HOUSE, 21:49:42 01/24/04 Sat(pool-138-88-48-154.res.east.verizon.net/138.88.48.154)
I am parting out a 1967 ranchero xl I have extra doors.
a 66 390 hood. a complet xl interior- rough. consol in good condution. It was a big blok car but know it has a 289 auto. the trans has less than 5k on it.ask about parts you need.
1967 427 standard bore engine -- Doug, 13:24:48 03/17/04 Wed(NoHost/199.247.235.10)
Looking for bare or complete block. Also need high riser heads uncut. Thanks
427 Ford NASCAR Crank -- James, 16:53:24 02/27/04 Fri(NoHost/192.100.51.222)
I am looking for a nice used std/std or NOS 427 NASCAR crank. Any help is greatly appreciated. Please email me at jjcebe@yahoo.com if you have any leads.
Need a 351C with 4V heads -- Wren, 00:44:30 03/12/04 Fri(dsl-10-094.atcnet.net/12.110.10.94)
Looking for a 351 Cleveland complete for a reasonable price. Looking for something that needs some rebuilding. If have a 351 Cleveland for a reasonable price, please e-mail me.
Transport to Columbus swap? -- Brian N, 18:15:27 03/12/04 Fri(cache-dc05.proxy.aol.com/205.188.208.73)
I have purchased a 69 Torino Gt project that I would like to get shipped to Columbus from Georgia--specifically between Savannah and Augusta. If anyone from that region is coming to the swap with an empty trailer, please let me know. I can make arrangements to get the car myself, but I really need to stay close to home for the time being due to a death in my family. Again, if anyone can help, please let me know. I will make anyone a fair deal on the shipping!
1972 Ford Torino -- classiccarprojects, 21:13:41 03/11/04 Thu(216-41-141-74.semo.net/216.41.141.74)
We have a very nice one owner Ford Torino 88000 miles,PS,PB,AC,has orgial window sticker, veiw on our site www.classiccarprojects.com
WANTED: AQUA GREEN 67 MUSTANG CONSOLE FOR A/T -- J-A-C-K, 16:46:22 03/10/04 Wed(cache-dc05.proxy.aol.com/205.188.208.73)
I dont mind if needed redyed. just want a aqua color to start with.
Thanks Jack 770-787-8838
PULLEYS FOR SALE---ALL KIND -- J-a-c-K, 14:56:05 03/09/04 Tue(cache-mtc-af05.proxy.aol.com/64.12.96.106)
I have many ford pulleys.289-302-351-w-351-c-390. a few 428 and 429. all blasted and painted satin black.If you know the number please give me a e-mail or shout.
Thanks Jack 770-787-8838
68 T-Bird w/429 Thunder-Jet -- Jim, 20:40:58 03/05/04 Fri(NoHost/67.72.98.61)
1968 T-Bird Landau, suicide four door, 429 Thunder-Jet, C6, complete but rough, $1,000 firm. Car is located in West Tennessee Contact Jim at jpp427@fortunehitech.net or call (901)268-6348
67 Mustang Resonator Studplate Templet.. HELP! -- Dan, 20:19:13 03/06/04 Sat(cache-dm01.proxy.aol.com/205.188.209.69)
I am trying to reinstall my exhaust system post the floor pan replacement and the bodyshop didn't save the original nor did they transfer the stud plate holes for the resonator hangers on to the new one. is there anyone out there that has the templet or can give me measurements from a fixed location on the pan like the inner seatbelt nutplate?
need 428 cj block -- guy, 18:43:06 03/06/04 Sat(cache-dm01.proxy.aol.com/205.188.209.69)
need a 9e,f,g.h.j date code cj block not needing more than 40 over on bore
NICE GALAXIE TOP LOADER 4-SPEED -- J-a-c-K, 12:32:03 03/06/04 Sat(cache-rl05.proxy.aol.com/152.163.252.229)
This one looks very nice inside.all teeth are nice.The small teeth on 2nd and 3rd gear are not wore much at all. still thick and pointed.$500.00 plus shipping from 30054 Ga.
Thanks Jack 770-787-8838
p.s swap on 428 parts.or hi po fe parts
Wanted 66 dash pad -- Ron, 21:35:38 03/05/04 Fri(webexpress.modempool.com/198.109.197.43)
Need black 66 fairlane dash pad. Must be excellent condition.
63-65 v8 fairlane complete motor mounts for sale -- J-a-c-K, 13:37:06 03/04/04 Thu(cache-mtc-af05.proxy.aol.com/64.12.96.106)
This set is nice and clean. all here to put 389-302 in your 63-65 fairlane.$75.00 for all.
Thanks Jack 770-787-8838 asohc427@aol.com
67 mustang cpe. cal. black plate car rust free -- jeff m., 14:29:37 12/25/03 Thu(cache-mtc-ah06.proxy.aol.com/64.12.96.171)
67 cpe. rust free small dents and dings.slightly modified 289,cam,intake,carb.,roller rockers,headers,dist,msd box. suspension mods include springs,neopreme bushings,a-arms,shocks. needs interior redone. under body is totaly rust free as is trunk,fire wall,shock towers,etc. runs and drive anywhere.located just east of pittsburgh pa. would make an excellent resto project or nice car to drive as you go. thanks jeff
427 short block -- Tom, 09:55:11 03/03/04 Wed(ppp-196-99-ks2.hubris.net/207.178.99.196)
427 short block 30 over one sleeve trw pistons sideoiler stroker crank lemans rods roller cam fresh and ready to run 4500.00 obo. 620-277-0259 or 620-521-2415 have other parts for sale to let me know what you need i might have it.
WANTED: one-427,428cj,406 ex. manifold -- J-A-C-K, 08:42:17 03/03/04 Wed(cache-rl05.proxy.aol.com/152.163.252.229)
Will buy one manifold at a time. Will take left or right of the following.427,406,428cj,boss 302 or hipo 289.
Thanks for your time.
Jack 770-787-8838 in ga
For sale 1969 302 and 70 429 -- John, 21:16:28 02/22/04 Sun(cache-rl05.proxy.aol.com/152.163.252.229)
I have a complete 69 302 and a 70 Dove 429 for sale or trade for Cleveland parts Email me @ MachOneMan69@aol,com
for sale 1959 tbird with 1973 429 engine c6 in it -- sam donahue, 23:19:40 03/01/04 Mon(hlst216-37-159modem01.epix.net/216.37.159.2)
1959 ford thunderbird has a 1973 429 motor and c6 in it motor and training excelent body a little rough but fixable would make good hot rod or parts asking 2500.00 located in pennsylvania
For Sale: 1970 Fairlane 500 2 door hardtop -- Ralph Terhune, 15:08:35 01/19/04 Mon(sdn-ap-011tnnashP0092.dialsprint.net/63.189.232.92)
For Sale: 1970 Ford Fairlane 500 2 door hardtop, car has 72K original miles, 351C 2V/C4 automatic, column shift bench seat, car is gold w/nugget gold interior and black vinyl top, paint is 80% original, interior is very nice, has P/S, PDB, A/C, Hedman Hedders, new dual exhaust with Flowmaster mufflers, new brakes, axle seals, wheel cylinders, new American Racing Torque Thrust II polished wheels and tires. have original wheels, tires, wheel covers, and exhaust manifolds. Car has no rust, all exterior trim in great condition. Please call for more info or questions. Price is $5500.00 Owner's name is Todd Long. Ask for him when you call- Home#(502)348-9219 Cell#(502)727-2231.
i collect and buy 67/68 cougar parts cars,wrecks, i have many parts available to for sale -- john, 14:32:38 03/05/03 Wed(mail.fuentez.com/63.100.227.194)
i collect and buy wrecks,give up projects,and parts cars for 67 and 68 cougars,please call or email.
i also have many parts available,interiors, quarters,glass,wiring,xr7 parts, seats,consoles, fenders,doors,wheels,motors,9 inch rear ends,390 motors,trannys,disc brake set ups,pwer steering set ups,anything just ask..thanks john 843 871 6140
no big block or 4 sp parts at this time and out of dash pads although i do need one if anyone has one available.
429 cj engine parts -- terry doyle, 19:59:11 02/26/04 Thu(cache-rl05.proxy.aol.com/152.163.252.229)
for sale-429cj cast iron exhaust manifolds,7 quart oil pan,
hv oil pump and pick up.$300.pestmail74 @aol.COM
428 4 speed carb -- Greg, 15:28:12 02/26/04 Thu(dhcp-0-4f-4e-d-17-57.cpe.mountaincable.net/24.215.17.253)
I have a carb for a 428 4 speed car for sale.Numbers on the air horn are C9AF 9510 M,LIST 4279,883.It has the correct metering blocks 5673,5671 and has the original Autolite tag that is dated 8HC.This carb has been sitting a while and will need a rebuild.Price is $375.Pics available.Thanks.
351C shortblock - sell or trade -- Kevin Black, 02:11:58 02/21/04 Sat(user-118bs9p.cable.mindspring.com/66.133.241.57)
I have a 71 351C block,crank, rods - essentially a short block. It will need rebuilt, still original bore. Sell or trade for rebuildable 351W block. Located San Diego, CA. Negotiable.
The Boss Sold -- Gerald, 00:47:07 02/21/04 Sat(h24-69-230-49.pi.shawcable.net/24.69.230.49)
This car sold 6 hours after I posted this. That might be some sorta record. It's going to Clevland. The car was located southwest British Columbia. Milage was 23,508 It sold for $28,000.00 to the first email I replied to. He purchased it on a description only. Thanks to all and sorry for not replying to this post sooner. As you can imagine I was very busy for the last few days to work out the details. I do have a full set of re-production tires and rims and caps for 1971 mach 1./ F 60 15's mounted on chrome magnums. Like new condition.
boss 429 complete dry sump set up -- jeffrey, 14:38:39 12/25/03 Thu(cache-mtc-ah06.proxy.aol.com/64.12.96.171)
complete dry sump set up including front pan,rear pan,belts,belt guard,dual rotor pump. perfect shape. no crackes,no welds,all there.
Boss 302 Mustang -- Gerald, 03:47:59 02/18/04 Wed(h24-69-230-49.pi.shawcable.net/24.69.230.49)
1970 302 Boss 3:91 4spd Original paint, original Mufflers. Less than 30,000 miles. Hi $20K's Minor dings and chips. 1 very small rust hole at tail lamp. Smog missing.
390 motor & related parts -- Bob, 13:54:09 01/03/04 Sat(cache-dm01.proxy.aol.com/205.188.209.69)
For Sale 1965 390 4- barrell motor COMPLETE with everything. Rebuilt approx. 25K miles ago With new 600 Holley carb $450 or just $325 without carb. Runs Great
68 J CODE 302 ENGINE AND TRANS FOR SALE -- J-A-C-K, 12:11:10 01/08/04 Thu(cache-mtc-ah06.proxy.aol.com/64.12.96.171)
Built sept.16.still in a 68 cougar.sitting many years but had running 6 months ago. needs complete rebuild.(hard to crank-smokes)Your getting correct complete 4 v engine with a/c comp.p/s pump.air cleaner(rusty),exhaust manifolds and c4 a/trans.$750.00 firm.May deliver up to 250 miles for small fee.Sorry will not ship.Im 40 miles east of atlanta.
Thanks Jack 770-787-8838
71 302 Rebuilt -- Don K., 07:03:50 02/18/04 Wed(wap2p91.dial.brightok.net/69.8.28.91)
I have a very nice 302 out of a 71 Mustang. The motor was rebuilt, and has less than 10K on it, before car was wrecked. Motor is complete intake to pan, including exhaust manifolds and flywheel. I personally drove the car after it was wrecked. (Very minor bumper thumper. Folks had poured a ton of money into the car, and jr. just kept drinking and driving, so mom and dad would not fix the car for him.) Anyway, motor is very smooth. Aluminum intake, chrome valve covers. Distributor still in place. This is a drop in ready to run motor.
$600.00 PS You can't build one for that.
Re: WANTED: 1972 Q-code 351CJ, Ranchero GT -- Frank, 14:12:47 02/16/04 Mon(cache-ntc-ac03.proxy.aol.com/198.81.26.72)
I have a 1972 Ranchero GT Q code with 90,000 original miles, original paint, factory 4 speed and all paperwork including original receipt and sales brochure.
Wanted Mustang 429 SCJ Holley Carb D1ZF YA -- Mark, 15:34:17 02/14/04 Sat(cache-rl05.proxy.aol.com/152.163.252.229)
Wanted: I need a Holley Carburetor for a 429 SCJ 4 speed Mustang part number D1ZF 9510-YA. Anything from a body to complete carb. Please let me know what you have. Thanks, Mark
its a four door hardtop (no pillar) -- kevin, 02:20:29 02/14/04 Sat(0-2pool14-126.nas6.los-angeles2.ca.us.da.qwest.net/65.141.14.126)
looking for a drivers side rear window for my 71 torino four door hard top. the four door with no pillar between the windows....please contact me if you have!!!!!
"WANTED" C7ZX-9425-A Duel Quad intake manifold -- George, 20:40:42 02/13/04 Fri(pcp04910151pcs.benslm01.pa.comcast.net/68.85.169.182)
Must be clean used,pictures and price please,thanks George
Wanted air cleaner base -- DanW, 17:20:35 02/12/04 Thu(ip68-109-132-115.ph.ph.cox.net/68.109.132.115)
looking for a 1971 mustang 429 CJ/SCJ Ram air cleaner base. Base only, don't need snorkle.
427 block -- Tom, 10:31:03 02/12/04 Thu(ppp-189-99-ks2.hubris.net/207.178.99.189)
for sale 64 center oiler 427 bare block standard bore no sleves
1650.00 ph 620-277-0259 or620 521-2415
70 MUSTANG 3-SPEED AND SHIFTER F/SALE $50.00 -- J-a-c-K, 17:53:55 02/11/04 Wed(cache-dm01.proxy.aol.com/205.188.209.69)
Really don't want to ship.I can bring to charlotte or nashville in april.Will fit a 65-70 mustang v8. but came out of a 70 mach 1 351-c 2v.needs a cleaning.$50.00.
Thanks Jack in GA.770-787-8838
429scj block -- s pauli, 15:54:36 02/11/04 Wed(0-1pool229-82.nas1.cheyenne1.wy.us.da.qwest.net/67.1.229.82)
DOVE-A four bolt main has two sleeves one and five
can send pictures 400.00 thanks steve
63-64 GALAXIE 3-SPEED $50.00 -- J-A-C-K, 15:38:41 02/11/04 Wed(cache-dm01.proxy.aol.com/205.188.209.69)
Worked perfect when removed.$50.00. really hate to ship but maybe. Or i can take to charlotte in april.You can pick up in atlanta Ga.
Thanks Jack 770-787-8838
want to trade -- s pauli, 21:38:06 12/30/03 Tue(0-2pool225-84.nas1.cheyenne1.wy.us.da.qwest.net/67.1.225.84)
I have a 1ua crank turned .010 mains .020 rods with both
balancers looking for three duce are two fours for fe
call 307 635 5615 aks for steve live in wyoming thanks
merry christmas jack
FOR SALE: Boss 302 heads -- Joel, 12:21:13 02/11/04 Wed(NoHost/63.81.8.136)
1970 Boss 302 heads prepped by Roush Racing, bare, ported & polished, heat risers blocked, water jackets reinforced. Asking $500. Also have Weiand tunnel ram (2-4s) $150 and K&N carbon fiber valve covers for Cleveland-style heads $250. Please email me at gtme1996@hotmail.com for pictures and info.
73 CJ Torino -- Jim, 09:41:24 02/11/04 Wed(NoHost/67.72.98.55)
Plain Jane, no option, 73 Torino formal roof, bench seat, 351CJ, 4 speed, tach and gauges, beige in color. Located in West TN. Contact Jim at jpp427@fortunehitech.net
WTB 64/65 Falcon Bucket Seats -- Mike in Walton Co GA, 01:33:13 02/10/04 Tue(adsl-155-225-108.asm.bellsouth.net/68.155.225.108)
Looking for a pair of bucket seats for 1964 or 65 Falcon. Any condition, gonna recover regardless.
Email me.
Thanks, Mike
Dust cover for 289 and 3 speed -- Mark Davis, 11:04:11 02/09/04 Mon(ss-9-68.pld.com/24.224.9.68)
I'm looking for the dust cover between the engine and transmission on a 1965 Falcon Ranchero 289, 3 speed man transmission.
1968 kick down cable, 302 V8 -- Jesse, 23:23:47 02/08/04 Sun(64118110145.netptc.net/64.118.110.145)
I am looking for a kick down cable for my mustang that i am trying to restore so that i can drive it. If you have one that you are willing to sell please contact me.
65 Comet "Cyclone" 289 Acode 225HP 4 speed -- Brian, 10:18:17 02/07/04 Sat(oh-newphiladelphia4a-156.wre.adelphia.net/24.50.209.156)
I have a 65 Comet "Cyclone" original A code 4 gear car FOR SALE. It is diassembled in need of restoration, Color spring time yellow, black interior, bucket seat console. There are extra parts included. $3000 FIRM Please email me direct!!! as I don't get back to the forum as often as I'd like.
70/71 Torino/ranchero parts 4sale, shaker, grill,etc -- Matt, 20:36:07 10/26/03 Sun(ca01-ch01-bl06.accel.atl.earthlink.net/207.69.140.15)
I am looking to clean out my garage of lots of good 70/71 Torino parts. I have:
shaker hood w/trim ring-- $100; Original Shaker scoop--$175; Hide-away headlight grill undamaged--$175 with switch/vacuum can, etc; 2 GT hoods--$50/each, 1 regular hood--$35, several doors, some complete, all with good glass/internals--$25-$50/each obo; GT rocker panel badges-$20; Full-length Taillight assembly--$75, Std taillights-- $50/pair. Too much to list really, quarter panel extendions, new radiator core support, new battery apron, grill parts, etc.. If interested feel free to call me at 314-630-6833, please leave a message if I dont answer. Or email me at dionysus124@hotmail.com
I am located in the St.Louis area, I'm not sure about shipping because some of these items are large, but I am willing to deliver for a small fee if it is only a couple hours drive.
Thanks
Matt
FOR SALE: HiPo 289 short block -- James, 10:57:53 12/08/03 Mon(sentinel.nv.doe.gov/192.100.51.131)
I have a C5AE HiPo 289 block date coded 5K25. It is currently 0.020" over and has had screw in freeze plugs put in. It comes with a HiPo 289 crank and a set of polished and shot-peened C3AE rods. It is complete from dampener to flywheel. It has a stock cam in it and a dual roller timing chain. Could run as is, or can be rebuilt if you want. The block has a K code vin number stamped in it as well.
WANTED: Vintage ET Mags, 15x4, 15x4.5, or 15x5 -- E.J., 07:16:31 12/31/03 Wed(netcache-3001.bay.webtv.net/209.240.205.60)
Looking for TWO, skinny ET Mags, 15x4, 15x4.5, or 15x5, 5-lug, Ford car pattern or unilug. E-mail FordMuscle@webtv.net
parting out 67 xl ranchero -- walter, 19:39:06 02/02/04 Mon(pool-141-156-46-150.res.east.verizon.net/141.156.46.150)
Parting out a 67 ranchero xl white interior bucket seats console ect. was big block car 4- spd. not know..
have a 289 and fresh c-4 underdash air. power brake set up ect.
call
703-242-8746
quarter panel -- bo, 00:52:33 02/02/04 Mon(cache-dm01.proxy.aol.com/205.188.209.69)
I'am looking for left and right full length quarter panels that have very little damage or rust
Shaker -- Gary, 08:08:59 02/02/04 Mon(SC215019.robins.af.mil/137.244.215.19)
Looking for a 428 Shaker base for a Mustang or 390 base.
E-Mail me at shelby19@cox.net
WANTED! 428cj parts -- graham, 15:40:22 02/01/04 Sun(ts46-01-qdr2883.kfalls.or.charter.com/68.118.39.82)
looking for a complete ram air setup,finned valve covers, Z-bar/equalizer bar and a correct rear spoiler with the non adjustable mounts.Please email me.
WANTED! oil cooler bracket -- graham, 15:36:31 02/01/04 Sun(ts46-01-qdr2883.kfalls.or.charter.com/68.118.39.82)
looking for an upper oil cooler bracket for a 69 cyclone torino,I have a perfect upper oil cooler bracket for a mustang I am willing to trade.Please email me.
WTB: 390GT "Turn-a-Key" Motor -- kansascobrajet, 13:00:27 02/01/04 Sun(sdn-ap-020neomahP0408.dialsprint.net/63.191.105.154)
In Search of a "Running" 390GT engine, within Driving Distance of the State of 'Kansas'. THANKS for LQQKIN'!!
Wanted: 66 Mustang Convertible 4-Speed Console -- Steve K., 08:07:22 01/29/04 Thu(cache-dm01.proxy.aol.com/205.188.209.69)
Wanted:
66 Mustang Convertible 4-Speed Console
Looking for a nice console to complete my interior.
My interior is black--but i will take any color as long as it is in good condition.
67 Shelby Headlight Buckets -- Brian, 01:16:58 01/17/04 Sat(c-24-21-4-41.client.comcast.net/24.21.4.41)
For Sale: 1 set of 1967 Shelby Headlight buckets complete with wiring. Contact me via email for details and pics.
70 shaker parts needed -- MachMan70, 22:57:43 01/29/04 Thu(adsl-20-171-171.clt.bellsouth.net/66.20.171.171)
I have a 70 that needs a lot of parts. If you have something you want to get rid of let me know. Thanks
C6OE valve trane parts wanted -- dave, 03:02:04 01/30/04 Fri(1Cust41.tnt5.iowa-city.ia.da.uu.net/67.251.189.41)
Looking for c60e valvetrane parts. also need 1 c60e head sloted holes comp. perfered
Wanted for 71 Torino Cobra -- Tore, 19:30:54 01/28/04 Wed(dsl12.39.91.5.madbbs.com/12.39.91.5)
I need some Chrome headlight bezels and the grille pcs they hook to.
65-66 full size ford parts F/S> trim, engine parts,misc -- chris m, 13:14:51 01/22/04 Thu(d41.as1.sfld.mi.voyager.net/216.93.63.170)
have lots of good used parts from 65-66 galaxies, xl's, LTD and custom. too much to list !! detroit area
parting out! 360 blocks trans and rears -- Brad, 20:41:50 01/27/04 Tue(cache-dm01.proxy.aol.com/205.188.209.69)
I have several 73/76 f1oo trucks to parts out. 360/390 blocks. 3 spd trans 351M/460 C6 trans and 9" rears. 1 dana rear also. 1989 mustang GT and 1983 Lincoln town car
bradsmustangs@aol.com
Maverick Parts -- Corbin, 20:39:10 01/26/04 Mon(ppp-67-119-178-65.dialup.pltn13.pacbell.net/67.119.178.65)
Hi all, here are a few parts I have. Email me for info/prices (email below):
1. 73 Maverick front bumper brackets. 1 pair
2. Trunk lid - pretty good, but has a little surface rust on the bottom lip where the LDO trim used to be and a couple small dimples.
3. Driver's side 2-door Quarter panel extension. NOT a Grabber unit. It has the LDO trim on it, but can be taken off if you don't want the trim
4. Various pieces of LDO body trim. I don't have a complete set as much of it was damaged, but I still have a few good pieces.
5. Stock 73 302 engine parts. Let me know what you need, maybe I can help you. Heads, intake, etc...
6. Flexplate for 302 with C4
7. Stock V8 power steering pump/brackets
8. Front V8 drum brake assembly w/ spindles. Anyone need parts/cores? Let me know.
9. Stock horn
10. Fan for V8 w/ AC
11. V8 exhaust manifolds
12. Tan gear selector indicator (P R N D 2 1) for auto on column cars.
13. Buzzer (don't know why anyone would want this, but it's avaliable )
14. 1 Driver's side shock tower brace w/o power brakes.
Email me for all parts requests and price at cricket3@pacbell.net . I have other misc parts. If you have any Mav parts for trade or sale - email me as well. Thanks.
Thanks,
-Corbin
***I also have a Granada power brake booster and brake pedal assembly/brace. If you know of anyone who needs one give me a holler. I don't know what year it came from.***
1967 RANCHERO -- WALTER, 19:11:02 01/26/04 Mon(pool-138-88-223-12.res.east.verizon.net/138.88.223.12)
I AM PARTING OUT A 67 XL RANCHERO CALL ABOUT THE PEICES YOU NEED.
703-242-8746
Wanted: Carb Solenoid to Harness Wire -- Matt, 15:17:30 01/26/04 Mon(cache-rl05.proxy.aol.com/152.163.252.229)
I am in need of the wire that runs from the carb solenoid to the main wiring harness. The carb solenoid has a "tab" sticking out of it that a connector would slip on. It is for a '70 Mustang, 351C 4 barrel, stick, with AC. Can anyone help?
C5AA-6394-A BELLHOUSING WHAT IS IT ?????? -- George, 20:59:47 01/25/04 Sun(pcp04910151pcs.benslm01.pa.comcast.net/68.85.169.182)
Looks like a 390GT or 428CJ But has numbers C5AA-6394-A with a big (Y) 427 ?? what is it,thanks George
C5AA-6394-A Bellhousing what is it ????? -- George, 20:56:51 01/25/04 Sun(pcp04910151pcs.benslm01.pa.comcast.net/68.85.169.182)
It looks like a 390GT or 428CJ but has numbers C5AA-6394-A with a Big (Y) I can't read the date and not sure of application ? 427 ? please help,thanks George
429 super cobra jet conntecting rods DOOE-A FOOTBALL RODS -- GEORGE, 12:45:17 01/25/04 Sun(cache-dm01.proxy.aol.com/205.188.209.69)
I AM LOOKING FOR A GOOD SET OF 8 RODS, AND A OIL PAN FOR A 429 SCJ THANK YOU PLEASE EMAIL ME OR CALL 1-814 748- 7536
FOR SALE.. 73 CJ 4-Speed Mustang Convertible **** -- Jeff, 08:57:38 01/25/04 Sun(as02-def-mi-205-185-236-114.rasserver.net/205.185.236.114)
VERY RARE '73 Mustang Covertible For Sale!
351 CJ 4-speed 325 traclock.
Blue and argent grey, Black ragtop and int.
Only 2 Convertible Mustang "Executive" cars produced in 1973
$23,000 obo
Also selling (5) 1973 "Q" code (351-CJ)Cougars, some 4-speeds, some hardtops, some convertibles.
Many N.O.S. and used parts also available for 71-73 Mustangs and Cougars.
Email or Call 734-578-3054 Jeff.
Also a 1968 "California Special" Mustang GT 40 motor. $15,ooo obo (For this car Only, CALL 734-306-1049 Tom)
WANTED: BOSS 351 Block -- Tom F, 22:20:20 01/24/04 Sat(ip68-1-61-147.pn.at.cox.net/68.1.61.147)
Need a standard bore, D0AE-L 4 bolt main block for a Boss 351 restoration. Will consider complete engine if you do not want to sell just the block. Cheers, TF (NW Florida)
1969 Torino Black Dash Pad, Excellent! -- Don K., 07:54:05 01/07/04 Wed(wap2p108.dial.brightok.net/69.8.28.108)
I have an excellent black dash pad for a 69 Torino. Came out of a GT car. No rips, tears or separations. Very nice indeed. It is taking up space in my closet and wife says get rid of it!! $65.00 PS
Don K.
WTB:: granada/maverick front brakes -- chris m, 13:11:42 01/22/04 Thu(d41.as1.sfld.mi.voyager.net/216.93.63.170)
looking for both spindles, possibly calipers and rotors also, would prefer something close to detroit mich
1969 mustang 428 scj fastback -- Tom, 10:52:47 01/22/04 Thu(ppp-205-99-ks2.hubris.net/207.178.99.205)
69 fastback dragpac R code 4:30 rear 4spd this car is a project I have most everything to put car togethter, car is not rusty. 18,500.00 please serious buyers only if car does not sell I will consider parting out. call 620 277 0259 620 521 2415 car is located in SW kansas
427 parts -- Tom, 10:44:21 01/22/04 Thu(ppp-205-99-ks2.hubris.net/207.178.99.205)
Have several 427 blocks heads intakes ect. for sale e-mail or call for needs and prices 620 277 0259 620 521 2415
66 fairlane gt -- Tom, 10:40:41 01/22/04 Thu(ppp-205-99-ks2.hubris.net/207.178.99.205)
I have two 66 GT fairlane project cars for sale will sell both cars together for 2500.00 Ph. 620 277 0259 or 620 521 2415 cars ar in SW Kansas.
66 Cyclone/ Fairlane above dash 6000 rpm tachometer (fact). -- Ron, 01:12:09 01/15/04 Thu(1Cust23.tnt10.den4.da.uu.net/67.235.111.23)
I have 1 used 6000 RPM factory tachometer for a 66 Mercury Cyclone. I believe it is the same as Fairlane? needs some work but is a nice original. it includes base and wiring pigtail has C6GF-10B948 # under base. also has (8 Cyl.) sticker on pigtail $175.00/offer
Wanted: NOS inner fender apron/panel -- Ron, 21:15:07 01/18/04 Sun(user-11204sh.dsl.mindspring.com/66.32.19.145)
I need an NOS inner fender apron/panel, passenger side, for a 1965 Mustang. Thank you!
1956 Ford web sites, forums, etc. -- Ron, 21:12:43 01/18/04 Sun(user-11204sh.dsl.mindspring.com/66.32.19.145)
Can anyone refer me to web sites, chat rooms, forums,parts houses,etc., that focus on 1955 and 1956 Fords, please? Many thanks, Ron.
'70 Torino shaker hood trim ring for sale -- Greg, 20:29:14 12/09/03 Tue(dhcp-0-4f-4e-d-17-57.cpe.mountaincable.net/24.215.17.253)
I have an original shaker hood trim ring for '70 Torino.May fit other years as well.Part number on the bottom of trim ring is D00B 16B924A.One mounting stud is missing but rest are good with nuts included.Part has no breaks/cracks or repairs done.Price is $150 plus shipping.Pics available.Thanks.
For Sale: 67 Shelby Headlight Buckets -- Brian, 01:19:13 01/17/04 Sat(c-24-21-4-41.client.comcast.net/24.21.4.41)
For Sale: 1 Set of 1967 Shelby Headlight Buckets for Inboard or Outboard mounting. These come with wiring and are in excellent condition. Email me for picsturs or questions.
Built 390 w/edelbrock heads/dove rocker/arp bolts etc. -- Gary, 19:38:24 01/14/04 Wed(NoHost/207.32.19.177)
Still have my rebuilt (never fired) 390 engine for sale. I bought a 428 pi so this 390 is expendable. Built with everything top notch. Crane cam 272 533 lift, bored 60 over, Dover rockers/stands, arp bolts thruout,remote oil filter by dove, polished C4 crank, $3,000 or best offer. pics upon request from serious bidders. Must pickup. I don't want to mess with freight. Located in central Iowa. Also, 428pi intake perfect shape and cobra lemans valve covers optional to buyer. Motor was rebuilt by professional engine builder in St. Louis. never fired.
FORD 460 to POWEGLIDE NEW JW BELLHOUSING -- THOMAS BEASLEY, 21:49:52 01/13/04 Tue(NoHost/209.132.171.198)
If anyone is looking for a JW Bellhousing to use a powerglide transmission behind a 429-460 engine look on eBay item #2453863686 Looks like a good deal if you need one.
W A N T E D: FE Mechanical Injection Front Cover, prefer Algon -- Randy Raokman, 19:59:18 01/13/04 Tue(NoHost/64.107.142.194)
W A N T E D: FE Mechanical Injection Front Cover, prefer Algon.
--==> WANTED <==--- '82 Mustang Headers -- Henry Thomas, 23:20:52 11/10/03 Mon(customer-COB-163-16.megared.net.mx/200.56.163.16)
please! if someone has or knows where can i buy headers for my '82 Mustang Hardtop (mexican) let me know! e-mail me or something!
Wanted: tremec or T-5 tranny, 9" ford rear end, discs for 67 mustang -- Jamescoop, 23:13:46 01/10/04 Sat(255.san-francisco-09rh15-16rt.ca.dial-access.att.net/12.72.142.255)
Hello all.
Im currently getting under way in bulding my 67 Fastbakc project. Im in dire need of the following:
9" Ford rear end
Tremec or t-5 transmission, bell, etc
67 mustang clutch pedal assembly and other stuff for manual tranny
Full set of disc brakes for 67 fastback
427 Blocks, Heads, Intakes -- Tom, 17:48:55 01/09/04 Fri(ppp-153-99-ks2.hubris.net/207.178.99.153)
2 427 centeroiler blocks std. bore 1650.00 each
1 side oiler 30 over stroker will sell complete short block or will split up, make offer.
LR heads 450.00
Tp heads bare 675.00
Mr Heads
Mr shelby new bare 1650.00
Dove MR 500.00
HR 1X4 500.00
2X4 LR bare 450.00
2x4 LR carbs[non ford no.]linkage and fuel log [C5AE-9425-E]
TP 1x4 NOS 850.00
LR adjustable rockers with steel stands 200.00
Phone 620-277-0259
620-521-2415
427 Blocks, Heads, Intakes -- Tom, 17:46:44 01/09/04 Fri(ppp-153-99-ks2.hubris.net/207.178.99.153)
2 427 centeroiler blocks std. bore 1650.00 each
1 side oiler 30 over stroker will sell complete short block or will split up, make offer.
LR heads 450.00
Tp heads bare 675.00
Mr Heads
Mr shelby new bare 1650.00
Dove MR 500.00
HR 1X4 500.00
2X4 LR bare 450.00
2x4 LR carbs[non ford no.]linkage and fuel log [C5AE-9425-E]
TP 1x4 NOS 850.00
LR adjustable rockers with steel stands 200.00
Phone 620-277-0259
620-521-2415
looking for 68 cougar body -- dean, 00:57:48 01/09/04 Fri(sktnsk01d050701236.sk.sympatico.ca/142.165.123.236)
looking for 68 cougar body, fenders must be in near excellent condition.
1974 302 Engine and C-4 trans for sale. -- Daniel, 19:12:43 01/08/04 Thu(dialup-67.30.247.123.Dial1.Atlanta1.Level3.net/67.30.247.123)
I have a 1974 302 engine and c-4 tranny out of a 74 F-100 with only 74,000 original miles on it. I'm not sure about the shape of the engine because it has been sitting out for a while but it is complete with all parts. I will sell the entire assembly for $400.00 as is. I am located about 50 miles east of Atlanta right on I-20. Exit 105.
I also have a 1978 f-250 with a 460 engine and C-6 tranny I am willing to sale. It was running when I bought it, but it has some carb trouble and I havent fixed it. Will sell whole truck, or will pull motor and trans out. It has Dana 60 rearend with 3.73 ratio also. Would like to get $500.00 for pulling the engine and trans, but would be willing to neg. a price for entire unit. Make me a good offer.
Wanted: 69 Mach 1 R-code Drag-Pack project! -- Brian, 22:31:00 01/07/04 Wed(cache-rl05.proxy.aol.com/152.163.252.229)
Roller less drivetrain prefered. Must have V or W axle code and be a reasonably solid California/Southwest car! Motivated buyer--please email or call me! Thanks, Brian N 1-614-836-3261
for sale 427 high riser heads and single 4 intake -- gordy, 21:54:48 01/07/04 Wed(164.140.252.64.snet.net/64.252.140.164)
high riser heads c4ae 6090f for sale with single 4 intake 1950
Wanted: 1969 Ford Torino big block radiator mounts -- Ralph Terhune, 01:49:19 01/06/04 Tue(sdn-ap-005tnnashP0380.dialsprint.net/63.185.41.126)
I need the upper and lower radiator mounts for a '69 Torino big block car, please. Thanks.
Wanted: Ranchero Head light rings and ignation module -- Mike Mac, 05:52:24 01/06/04 Tue(adsl-209-30-159-18.dsl.rcsntx.swbell.net/209.30.159.18)
I have a 75 Ranchero with a 351m/400 ranchero and am looking for a cheap junk car and an ignation module in good condtion. also need head light retanning rings.
Wanted: Ranchero Head light rings and ignation module -- Mike Mac, 05:51:21 01/06/04 Tue(adsl-209-30-159-18.dsl.rcsntx.swbell.net/209.30.159.18)
I have a 75 with a 351m/400 ranchero and am looking for a cheap junk car and an ignation module in good condtion. also need head light retanning rings.
Wanted: Head light rings and ignation module -- Mike, 05:48:43 01/06/04 Tue(adsl-209-30-159-18.dsl.rcsntx.swbell.net/209.30.159.18)
I have a 75 ranchero and am looking for a cheap junk car and an ignation module in good condtion. also need head light retanning rings.
67 Mercurty Cyclone -- Fabian Jolivet, 04:11:15 01/02/04 Fri(adsl-67-123-220-136.dsl.lsan03.pacbell.net/67.123.220.136)
Looking for 67 Mercury Cyclone (two door- 289) parts:
1) Passenger side headlight bucket
2) Remote system for driver side mirror
3) Fabric for one of the seats. It's black, with fake holes on it (Rally type?) thanks!
64 "R" -- Jess, 13:32:59 10/23/03 Thu(ip68-7-14-63.sd.sd.cox.net/68.7.14.63)
64 galaxie 500 "R".Less Engine & Trans.Has typical rust.Has a 390/c-6 in it now.Was in it when i got it.Will run,but not drivable.Best offer-no insults please.Contact me @ 619-944-7439. Thanks JESS
427 TP heads -- Greg, 16:08:18 01/04/04 Sun(dhcp-0-4f-4e-d-17-57.cpe.mountaincable.net/24.215.17.253)
Pair of 427 TP heads for sale.They have been mag tested and are in very good condition.Come with NOS set of intake and exhaust valves in Ford boxes ("S" at end of part number on stem),used Holman and Moody valve springs(low hrs.)titanium spring retainers and cups.Price is $2200 plus shipping.Other 427 parts available.Thanks.
WANTED CLUTCH FORK,REV LIMITER,FAN SHROUD -- STEVE, 13:57:46 01/03/04 Sat(ool-44c23a1d.dyn.optonline.net/68.194.58.29)
I AM LOOKING FOR THE FOLLOWING PARTS FOR A 1970 429CJ TORINO:
CLUTCH FORK PART# DOOA-7515-A
REV LIMITER PART# D0ZZ-12450-A
FAN SHROUD PART# DOOZ-8146-D
POWER STEERING BRACKET PART# D0AZ-3C511-C
THANKS
1960 ford starliner sheetmetal or doner car -- Leo Klein, 21:45:35 01/02/04 Fri(216-39-190-186.ip.theriver.com/216.39.190.186)
lookin for parts or doner car.
71 mustang for sale -- dave, 10:21:42 01/02/04 Fri(NoHost/216.174.160.141)
71 mustang coupe for sale has 9" ladder bar rear 10 point cage 472 bbf with a glide complete car comes with some spares 472 complete short block disc brakes for front not on the car asking 8500.00 call 217-482-5688 or email crossdm@abelink.com for more info and pics can deliver with in reason
429 ram air -- Mike Taylor, 02:23:27 01/02/04 Fri(63-227-103-115.spkn.qwest.net/63.227.103.115)
I am looking for a ram air set up for a 429. This will be going in a 71 Mach 1.
I especially am looking for the base and if a snorkle is with it all the better. Any info is greatly appreciated
Thanks
Mike
