VoyForums
VoyForums has a no-popup policy. If you think you are receiving a pop-up originating from a VoyForum,
please report the Forum ID and any ad info using this contact form.

[ VoyUser Login optional ] [ Contact Forum Admin ] [ Main index ] [ Post a new message ] [ Search | Check update time | Archives: 1 ]

[ Next Thread | Previous Thread | Next Message | Previous Message ]

Date Posted: Sunday, December 10, 08:08:50pm
Author: David Howland
Subject: Re: Craftsman Sander Mo. 315.11751
In reply to: Kristen 's message, "Craftsman Sander Mo. 315.11751" on Saturday, October 01, 11:05:27am

>My neighbor is looking to find out how to change or
>replace the sanding belt on the sander, NOT the drive
>belt. Anyone have the instructions??
This is 3 inch sander, correct? With the sander unplugged with both hand in the sanding possition, push down on the front wheel. The front wheel will move backwards about 1/2 to 3/4 of an inch. Remove the old belt. Put the new belt on making sure you have the belt traveling in the correct direction. Yes, some belt have a direction of travel. Look for the arrows on the inside of the belt.

With a flat head screw driver, place it between the front wheel and the center housing (between the front and rear wheel) and press forward. The front wheel should snap back into place. Now with safety glasses on, plug in the sander and power it up. Use the knob on the opposite side to adjust the belt from left to right.

The other option is to read the manual. :-)

[ Next Thread | Previous Thread | Next Message | Previous Message ]

Replies:

  • Re: Craftsman Sander Mo. 315.11751 -- Alan, Tuesday, April 22, 07:30:48pm
    [ VoyUser Login ] Not required to post.
    Post a public reply to this message | Go post a new public message
     * Notice: Posting problems? [ Click here ]
     * HTML allowed in marked fields.
    Message subject (required):

    Name (required):

      Expression (Optional mood/title along with your name) Examples: (happy, sad, The Joyful, etc.) help)

      E-mail address (optional):

    * Type your message here:


    Notice: Copies of your message may remain on this and other systems on internet. Please be respectful.

    [ Contact Forum Admin ]

    Forum timezone: GMT-6
    VF Version: 2.94, ConfDB:
    Before posting please read our privacy policy.
    VoyForums(tm) is a Free Service from Voyager Info-Systems.
    Copyright © 1998-2008 Voyager Info-Systems. All Rights Reserved.