VoyForums

VoyUser Login optional ] [ Main index ] [ Post a new message ] [ Search | Check update time | Archives: 12 ]


[ Next Thread | Previous Thread | Next Message | Previous Message ]

Date Posted: Mon March 31, 2014 2:57:26PM
Author: Pete F
Subject: Re: gas leaking out of overflows?
In reply to: larry 's message, "Re: gas leaking out of overflows?" on Mon March 31, 2014 10:28:03AM

Check the float bowl seals as well.. If you have pinched one, there's your leak..
Float height is 17mm from just touching the needle valves..
Need to hold carbs at an angle and not straight up because the weight of the floats will cause the needle spring to compress..
If you didnt replace the bowl seals, then these are a prime culprit.
Also.. If you replaced the needle valves, unless you used the original hangers (the wire W holders), after market hangers can be too big and foul causing the float valve to never close..

[ Next Thread | Previous Thread | Next Message | Previous Message ]

VoyUser Login ] Not required to post.
Post a public reply to this message | Go post a new public message
* HTML allowed in marked fields.
Message subject (required):

Name (required):

  E-mail address (optional):

* Type your message here:


Notice: Copies of your message may remain on this and other systems on internet. Please be respectful.


Forum timezone: GMT-6
VF Version: 3.00b, ConfDB:
Before posting please read our privacy policy.
VoyForums(tm) is a Free Service from Voyager Info-Systems.
Copyright © 1998-2017 Voyager Info-Systems. All Rights Reserved.