Date Posted:20:11:23 01/28/12 Sat
The first thing I would check would be the actual ignition switch located at the bottom of the column under the dash where the rod snaps in. It should be a rectangular white(sometimes gray) plastic box bolted to the column. They are usually the culprit! Unless the tilt mechanism is loose then it could be the rods binding inside the column.
Date Posted:21:41:12 01/28/12 Sat
IF YOU HAVE A FLOOR SHIFT OR EVEN A COLUMN SHIFT THE SHIFTER MUST BE BACK ALL THE WAY IN PARK FOR THE KEY TO RELEASE.
I HAVE SEEN WORN COLUMNS EVEN IN PARK THE KEY WOULD NOT RELEASE AND YOU HAD TO GRAB THE BELL ON THE COLUMN AND GIVE IT A LITTLE HELP SO IT WILL GO ALL THE WAY "HOME" AND RELEASE THE KEY.
Date Posted:02:23:25 01/30/12 Mon
I FOR ONE NEVER SAID ANYTHING ABOUT A MOTOR OR TRANSMISSION. FIRST BEFORE YOU CAN GET HELP YOU WILL HAVE GO BACK TO THE FIRST OR MAYBE THE SECOND GRADE AND LEARN TO PAY ATTENTION...........
