VoyForums

Sunday, November 08, 01:21:33pm [ VoyUser Login optional ] [ Contact Forum Admin ] [ Main index ] [ Post a new message ] [ Search | Check update time | Archives: [1] ]

MustangII & Ford Message Board
Mustang II & Ford owners World!
Welcome Ford enthusists!
Here you can ask, tell about or buy/sell parts for your MustangII or Ford!


NEW PICTURE PAGE UP!!!

-->Click Here for Photo Page<--

Okay, our board has more memory, so I can post more pic's, keep sending!




I just had to add this pic. Joe Burkhart's '78 King Cobra at Houston raceway park
My cobraII.
My coupe. Modified V8, new 16/8 rims W/ 265/50 tires (not in pic.) dual flowmasters, MSD Edelbrock RPM intake & manifold, & hot cam. Endcap missing on the spoiler at the time. To know more, just ask me. 76k mi.

John aka "blue oval dude" 91 mustang lift back. It is tubbed and lowered 7 in. Building a 408 svo blocked alcohol inj. FORD small block for it. The car has been 6.20 with the 383 in. motor.
Rich's '78 CobraII. Orignal owner. 25,000 Mi. 'Hasn't seen rain'.
Tim Grahl's Cobra II with 58,000 k. (will add other pic. soon)
CHECK OUT MY MUSTANGII WEB SITE:

Joe's Mustang II Part's


Joe's Mustang II's 1837 Wycliffe Dr. Houston Tx. 77043 713-461-4435 or 713-461-1946 E-Mail: (JPayne9207@aol.com) Joe's MustangII Email

If that address doesn't work (aol), try this one, (JPayne9207@MustangII.net) Joe's MustangII Email #2

PLEASE SEND ME YOUR PIC'S IF YOU WANT THEM POSTED! I have a program that will lower the file size so the board will load faster. Thanks



"The best Auto parts store in town"
Joe Payne Jr. store 502 Houston Tx.

Joe's MustangII Parts
  • EFI conversion -- Darren, 21:34:23 12/25/01 Tue (65.93.69.11)
    I am considering doing an EFI conversion to my '78 II, i was wondering if anybody, that has done it, has any advice or tips? Also, has anybody used the aftermarket 2" dropped spindles for the II? (they are from hot rod, t-bucket suppliers) I am just begining an extensive mod job and any input would be greatly appreciated.

    [Edit]

    Replies:

  • air dam & hood scoop wanted -- Joe, 18:56:38 12/25/01 Tue (65.26.60.246)
    I'm looking for air dam and hood scoop for a 77 cobra II, Can anybody help?

    [Edit]

    Replies:

  • 351 in '77 Cobra II? -- Grandpa, 23:50:25 01/05/02 Sat (216.142.233.105)
    We're going to look at a '77 Cobra II that has had a 351 installed by a previous owner. Was wondering if you guys could give some tips or hints on what to look for. Does the car need beefier front end or other mods to hold up to the heavier engine? It has auto trans, but I don't know which one yet.

    Thanks for the help - if we get the car we'll probably be on here pretty often to learn from your experience!

    [Edit]

    Replies:

  • Cold weather car starting!?!?!? -- Greg Buckley, 16:41:06 01/13/02 Sun (152.163.195.188)
    86 Mustang Gt 302 5.0-Cobra Motor, as soon as weather becomes cold car starts to run poorly, and is extremely hard to start. Otherwise car runs perfect-thermostat, tune up etc are not the problem-can anyone help??

    [Edit]

  • TIRES AND RIMS 14 INCHFOR 1978 MUSANG -- DONNA, 17:26:53 01/01/02 Tue (205.188.196.46)
    WOULD LIKE PRICE ON TIRES AND RIMS 14 INCH, FOR A 1978 MUSTANG AND IF POSSIBLE SEAT BELTS.IF YOU HAVE THESE ITEMS WE WOULD BE INTERSTED .
    MRS.DONNA PAULISON

    [Edit]

  • Ford 460 -- Eric, 18:04:01 06/12/01 Tue (63.252.146.231)
    Fresh Ford 460 long block for sale. Forged pistons, heads have larger stainless valves and ported exhaust, edelbrock torker II intake, edelbrock aluminum water pump, edelbrock cam. Reply to this post for more info.

    [Edit]

    Replies:

  • Vehicle Identification Verification ( VIN Decoder -- VinEasy, 09:33:06 07/29/01 Sun (63.216.146.102)
    Vehicle Identification Verification ( VIN Decoder )
    http://63.216.146.102/vininfo/VinEasy.asp
    Our VIN Decoder allows you to enter the Vehicle Identification Number (VIN) to

    obtain the manufacturer's description of that vehicle along with other pertinent

    information contained in the vehicles ID.

    URL
    Vehicle Identification Verification ( VIN Decoder )
    http://63.216.146.102/vininfo/VinEasy.asp

    [Edit]

    Replies:

  • 1994 MUSTANG GT SALEEN REPLICA - $9500!!! -- Eric, 18:10:46 11/29/01 Thu (199.174.50.11)
    fresh paint job, new cobra r hood, lot's of motor modifications , e303 cam, mac headers, msd coil, under drive pullies, etc. etc.

    98 cobra wheels, saleen s351 body kit, saleen s351 wing, 2" lowering springs, kyb quad shocks, cobra rear shocks, steeda camber plates, ..


    only asking $9500 !!!!


    contact me at z0mb1e@earthlink.net or 972 931 8780

    [Edit]

  • Mustang Aftermarket Wheels -- Ted, 12:24:01 11/21/01 Wed (65.196.237.140)
    I have a 1968 Mustang. I'm considering to purchase a set of Aftermarket Wheels from American Racing. Is there anyone out there who knows the quality of American Racing's products, as well as their reputation in the Aftermarket Wheel industry?

    Your thoughts are appreciated.

    Ted

    [Edit]

  • Fuel Pump Question -- Trevor, 23:26:49 11/17/01 Sat (172.149.117.171)
    Hi. I race a stock car with a 2.3L ford engine. Someone gave me a 2.3 from an 88' Mustang. Its in great shape, but I think it has an electric fuel pump (I havent seen it yet) We have to run manual fuel pumps...This might be a stupid question but is there a way I can adapt the motor to run with a manual pump?? If you have any advice, I'd really appreciate it if you could email me @ tmmotorsports395@aol.com

    Thanks,
    Trevor

    [Edit]

  • 2001 bullitt mustang -- justin in canada, 01:17:07 08/01/01 Wed (204.244.220.98)
    I am looking for someone who could reccomend a computer chip for my 2001 bullitt. Its got plenty of get up and go but I am always looking for more.

    thanks justin

    [Edit]

    Replies:

  • top speed -- Mike, 18:47:22 09/12/01 Wed (216.209.142.81)
    what is the top speed of the 2001 bullit?

    [Edit]

    Replies:

  • windows -- Andy, 15:46:27 10/09/01 Tue (206.45.185.1)
    I am looking for a rear passenger side window and both louvers for my 77 cobraII. Would anybody know where i can find them.

    [Edit]

    Replies:

  • Transmission Swap -- Mark Anderson, 20:42:48 07/25/01 Wed (216.176.168.50)
    The transmission in my 76 Cobra Mustang is ruined. Was told I could put a T-5 5-speed in it. Need to know what modifications I will need to make this work. Thanks for your help!

    [Edit]

    Replies:

  • Cobra VIN # -- Sean, 15:15:58 10/24/01 Wed (129.219.71.85)
    I was looking at buying a 1997-1998 Cobra mustang, and I was wondering how you can tell from the vin # if it is a true cobra?

    [Edit]

  • New Board...... -- CobraII- admin, 23:48:15 03/04/01 Sun (64.12.106.52)
    Ok, Now that the new boards up, I need to start to re-arange things. First thing that goes, are the pics. Seems to take a while longer to download than the last board. I will open another gallery for the pics. I think this funky background will have to go too.
    I still have 302 Motor Mounts, so if you need some, let me know quick!!

    [Edit]

    Replies:

  • V6 manual trans mount to V8? Need V8 parts -- racebannen, 10:43:37 09/30/01 Sun (63.21.253.165)
    Greetings everyone! I have a manual transmission out of a V6 Cobra ('76 I think) wondering if it will work on a V8 engine. If so will I have to change the bellhousing and clutch pedal assembly? Missing the flexplate and clutch so I'll have to get parts anyhow. Thanks for feedback!

    [Edit]

    Replies:

  • Parts for sale -- Joe B, 07:52:06 08/22/01 Wed (63.112.190.116)
    I have both front fenders, grill, King Cobra air dam, front and rear bumpers, and a 3 piece rear wing. All parts are in good condition except for the air dam, there is some wear and tear on it but could be repaired. Parts came off of the black KC at the top of this board. $350.00 will take it all.
    E-mail if interested.

    [Edit]

    Replies:

  • wanted -- Bart, 19:43:53 10/06/01 Sat (207.15.183.5)
    I am looking for parts for my newly aquired 78 t-top mustang II.I need side and rear louvers,front air dam or valance and spoiler,rear spoiler,aluminum cobra II door panels,map light,and probably some other stuff.What do you have?I know I am not asking for much!

    thanks

    bart

    [Edit]

  • Mustang II Steering Column Swap -- Ron, 21:44:51 10/02/01 Tue (4.48.85.242)
    I am building a Cobra Kit ( wife finally gave the ok )and need a Mustang II Steering column. I found a column for a 1980 Pinto. I was wondering if anybody know if this column is the same. I know some Pinto and Mustang II parts are interchangable... HELP!!!
    E-mail me with comments, info and/or answers. Thanks!
    ronzara@hotmail.com

    [Edit]

    Replies:

  • HEADERS -- JESSE, 23:58:13 10/01/01 Mon (64.210.248.135)
    I GOT A SET A HEADMAN HEADERS THAT WILL FIT A 64-73 MUSTANG 260-302W I WILL TAKE $80 OR TRADE THEM 4 A SET OF FULL LENGHT HEADERS THAT WILL FIT A 88 MUSTANG I DONT CARE IF THEIR UGLY AS LONG AS THEY WORK

    [Edit]

  • Searching for a good II.... -- Scott, 00:01:18 09/09/01 Sun (199.174.1.103)
    If you're ready to sell your 76 to 78 fastback or Cobra II w/302, STRAIGHT, NO RUST, and priced right please contact me. I would prefer original, but high performance or rolling body OK. Prefer black or tan interior with automatic tranny, but flexible. Houston area and surrounding ONLY! I have traveled over 2100 miles this month only to discover rusted out, bondo infested, performance want to be's that should have been put down long ago and I am all traveled out. I know Mustang II's and high performance small block Fords and will identify any attempted cover-ups, fakes, or frauds so if your going to lie, misrepresent, or exaggerate your car don't waste my time! If you have what I am looking for and nothing to hide and you are looking for a good home for your car I would love to hear from you. Email me at:

    crowntainer@mindspring.com

    [Edit]

  • CAR SHOW......... -- CobraII-- admin, 13:08:49 08/17/01 Fri (64.12.105.27)
    Those of ya'll living in the Houston area, There's a car show/hangout on west Rd. & Hwy 6 at the Firestone Every Saturday night. Starts at 7:00 pm & ends a 10:30 pm. Lots of classic Hotrods & showcars. There will be 3 MustangII's there.

    [Edit]

    Replies:

  • About the spamming........... -- Your admin, Cobra II, 00:29:02 08/16/01 Thu (205.188.195.47)
    I don't mind messages being posted here by people trying to sell CAR PARTS, but I will not tolorate constant spamming of 2 page off topic (porno) adds. This is not the playboy chatroom. If you (the spammer) contenues, I will have you banned from this site, forever.

    [Edit]

  • A good serpentine belt drive for the II -- Cobra II, 02:07:36 07/28/01 Sat (205.188.198.188)
    For those of you wanting to update the belt drive system in your II, the best belt drive to use is the 83 (& surrounding years) 5.0. You will have to use the reverse clutch fan (which works better) & the smaller, lighter compresser. With a few modifications to the hoses, the compressor will work just as good as the orignal. The emmisions, alternater & P/S lines & wires will not have to be modified. The top coolant hose with an in-line filler cap should clear the Alt. (Haven't experimented with the one piece upper hose yet.) I, & a few friends of mine have used this drive on a few of our II's, & are very satisfied.

    [Edit]

  • Transmission Swap -- Mark Anderson, 20:41:02 07/25/01 Wed (216.176.168.50)
    [Edit]
  • measurement -- dmiller, 15:16:28 07/24/01 Tue (204.242.198.81)
    need to know the distance between the backing plates on a mustang II rear end. Im looking for a rear thats 50.5 inchs
    +- Thanks.

    [Edit]

  • looking for felxplate -- bert charvet, 23:49:53 06/14/01 Thu (205.162.13.68)
    I am looking for a flexplate for a 1977 mustang with a 302 v8 C4 auto ? please email me at bert985132yahoo.com with price I live in olympia wash

    [Edit]

    Replies:

  • ADMIN---MISSING IN ACTION -- COBRA II--admin, 17:10:31 05/23/01 Wed (205.188.197.33)
    Sorry I have been gone for months guys. I had some personal issues to take care of. Iv'e noticed the number of people posting here has droped due to the fact it takes an hour to load this board!! I will now start to modify the board to make it more user friendly. Will have the pic index up soon.

    Thanks

    [Edit]

  • Here is the banner -- SaNdE®, 04:40:58 03/31/01 Sat (212.238.9.171)


    [Edit]

  • Transmission needed -- Cobra II, 22:44:11 03/15/01 Thu (64.12.105.153)
    I need a T-5 tranny out of an early 90's Mustang. Let me know if you have one, or know where to get one.

    [Edit]

  • testing again -- ., 20:42:05 03/01/01 Thu (64.12.106.38)
    testing

    [Edit]

    Replies:

  • test test -- test test test, 08:51:55 03/01/01 Thu (152.163.205.39)
    hay testy test test

    [Edit]

  • Temporary board -- Cobra II - admin, 22:01:15 02/28/01 Wed (152.163.205.28)
    Well guy's, Inside the webs closing their doors so, this will be the board until I find a better one.

    [Edit]

    Replies:

  • testing..... -- Admin, 23:30:11 02/28/01 Wed (64.12.102.172)
    testing......

    [Edit]

    DISCLAIMER: Copyright © 2000-2001, all others are posted with photographer and or owners granted permission. Our display of the O'Reilly Auto parts logo was granted by store # 502 Manager on the date of 8/01. 'MustangII & Ford Message board' does not participate in any illegal street race, illegal advertisment, or "under the counter" cash sales. The founder of this site cannot be held accountable for what is posted here. You understand that the information provided in this web site may be falsified or altered and therefore no person, car, motor vehicle, motor vehicle owner, or spectator can be held accountable for any visual or written information seen in this website. Because all written and visual information may be falsified or altered, no person, family member, heir, legal representative, officer of the court, peace officer, or any other legal officer, may construe any of this website as real and can not hold anyone participating in this site accountable. The above statement is in accordance with the Internet Privacy Act, code 431.322.12 of 1995
    [ Contact Forum Admin ]

    Forum timezone: GMT-6
    VF Version: 2.94, ConfDB:
    Before posting please read our privacy policy.
    VoyForums(tm) is a Free Service from Voyager Info-Systems.
    Copyright © 1998-2008 Voyager Info-Systems. All Rights Reserved.