|
[> [> [> [> [> Subject: Re: IGT wheel problem -- Fixed Thanks Everyone
|
Author:
Buddy
[Edit]
|
Date Posted: 12:00:38 06/03/06 Sat
Just Now getting around to fixing the slot ,Mpu installed code 61 came up hit self test button, heard ding turned key, wheels spin and working great, Thanks Alotttttttt Jay and everyone else. Nice to have a place like this to go to and get help.
>The Self-test button is by the power switch.
>
>The correct instruction for clearing a wheel tilt is
>to hold the self test button for 5 seconds release,
>close the door and then all the wheels should spin
>once and you should be on your way.
>
>If not then going with your thought to swap CPU ??
>
>By your reference to CPU ? do you mean the MPU board.
>In an upright this is right behind your hopper with a
>large knob on it. To swap your MPU board make sure
>your power is off.
>
>Then you need to simply lift the board up and out, and
>swap the other board in place. Before you put the
>board in - do you have a reel and game chip in
>place.... if you got your spare from Ebay then it
>likely did not come with either of these.
>
>You mentioned another working machine. The board from
>this should have the necessary 2 chips.
>
>When you replace your MPU you should get a 61 error.
>if so this is a good sign.... From there you hold the
>self test button for 4 seconds until you hear a ding.
>The error will change to a 61 1 error, then you close
>the door and turn 1 twist of the reset key on the
>side...and you should see the reels spin and you will
>be in game mode.
>
>Let us know ?
|
|
Re: IGT wheel problem -- Still Need Help!!!!!!!!