Author: Jerry Fluegel (This problem has been solved...NEW problem)
[ Next Thread |
Previous Thread |
Next Message |
Previous Message
] Date Posted:07:35:06 03/08/08 Sat In reply to:
Dupuhini
's message, "Re: bally s5500 83f error code" on 12:49:52 03/07/08 Fri
Battery is ok. I found out that the reset chips are not needed, and don't work in this model. All that was needed, was to move the J10 jumper and do the ram clear with the test and pseduo buttons and replace the J10 jumper.
Now I have another problem....error 41 Improper reel spin.
The first play after power up works fine. On the second play, the 41 error comes up, and I don't know how to clear it. Any ideas?
Regards,
Jerry
[
Next Thread |
Previous Thread |
Next Message |
Previous Message
]
Date Posted:08:43:47 11/18/08 Tue
Jerry check reel no 1 for a loose wire then do a complete clear again with J10 and holding the test and pseudo buttons turn machine on hold buttons in till you get a CL C then turn machine off and change jumper C >Battery is ok. I found out that the reset chips are
>not needed, and don't work in this model. All that was
>needed, was to move the J10 jumper and do the ram
>clear with the test and pseduo buttons and replace the
>J10 jumper.
>Now I have another problem....error 41 Improper reel
>spin.
>The first play after power up works fine. On the
>second play, the 41 error comes up, and I don't know
>how to clear it. Any ideas?
>Regards,
>Jerry
