[ Next Thread |
Previous Thread |
Next Message |
Previous Message
] Date Posted:10:04:18 04/17/08 Thu In reply to:
gregg rekoff
's message, "bally s5500 83f error code" on 19:29:38 12/07/07 Fri
Any suggestions on how to change the horizontal display size on a bally game maker fitted with a tatung monitor. the horizontal size preset on the monitor does not respond at all. I have 3 machines with an identical problem of a stretched image. Are there any settings on the MPU board for screen size.
[
Next Thread |
Previous Thread |
Next Message |
Previous Message
]
Date Posted:19:34:20 09/12/08 Fri
>Any suggestions on how to change the horizontal
>display size on a bally game maker fitted with a
>tatung monitor. the horizontal size preset on the
>monitor does not respond at all. I have 3 machines
>with an identical problem of a stretched image. Are
>there any settings on the MPU board for screen size.
The Problem is in the monitor. Remove the monitor from the game and remove the black cover from the back of the monitor. Carefully remove the neck board from the crt. Remove the 3 screws to remove the chassie. Beside the FBT you will find a 4.7 MFD 50 Volt NP cap. this needs to be replace and will restore HORZ. WITH CONTROL at the monitor. GOOD LUCK
