Re: Ceronix 1492 monitor question -- SLOT MACHINE INFORUM

[ VoyUser Login optional ] [ Contact Forum Admin ] [ Main index ] [ Post a new message ] [ Search | Check update time | Archives: 1, 2, 3, 4, 5, 6, 7, 8, 9 ]

Subject: Re: Ceronix 1492 monitor question

Author:
Bob
[ Next Thread | Previous Thread | Next Message | Previous Message ]
Date Posted: 12:31:12 03/24/09 Tue
In reply to: Leonardo 's message, "Re: Ceronix 1492 monitor question" on 19:45:03 03/22/09 Sun

All you had to originally do was change 2 wires around on a plug from the yoke to the board- there should be 4 going from the monitor to this pluf. I have a photo of this plug and the wires. E mail me if you like. Easy to do with a paper clip; this would have corrected the uspide down picture- now I suspect you need an entire new board from Ceronix or off of Ebay if you can find one- the Ceronix new chassis are about $80- or have your old board rebuilt. You might also get a picture inside out; all you have to do is switch the other 2 wires from this plug. Easy! I know you thought this would work- good luck on this!

>>I obtained a replacement Ceronix 1492 monitor to use
>>in my IGT Player's Edge upright poker machine. When
>>the replacement was received is had a great picture
>>with one small problem - the picture was upside down.
>>Of course most people know that you can loosen the
>>yolk and turn it 180 degrees but I have a BIG problem
>>with moving something that has gotten use to being
>>where it has been for years (and wants to stay there)
>>and that part of the picture tube has veerry thin
>>glass as we all know. So after looking the whole
>>problem over I decided to turn the entire tube over
>>and that would take care of the problem right???? -
>>WRONG!!! Since the high voltage connection on the
>>tube was now on the bottom it was apparently too close
>>to the frame and shorted out the high voltage damaging
>>the boards. I can't help but feel that there has to
>>be some simple way to change the input to the tube to
>>correct this but what is it?????

[ Next Thread | Previous Thread | Next Message | Previous Message ]

[ VoyUser Login ] Not required to post.
Post a public reply to this message | Go post a new public message
* Notice: Posting problems? [ Click here ]
* HTML allowed in marked fields.
Message subject (required):

Name (required):

Expression ^{(Optional mood/title along with your name) Examples: (happy, sad, The Joyful, etc.) help)}

E-mail address (required):

* Type your message here:
>All you had to originally do was change 2 wires around >on a plug from the yoke to the board- there should be >4 going from the monitor to this pluf. I have a photo >of this plug and the wires. E mail me if you like. >Easy to do with a paper clip; this would have >corrected the uspide down picture- now I suspect you >need an entire new board from Ceronix or off of Ebay >if you can find one- the Ceronix new chassis are about >$80- or have your old board rebuilt. You might also >get a picture inside out; all you have to do is switch >the other 2 wires from this plug. Easy! I know you >thought this would work- good luck on this! > >>>I obtained a replacement Ceronix 1492 monitor to use >>>in my IGT Player's Edge upright poker machine. When >>>the replacement was received is had a great picture >>>with one small problem - the picture was upside >down. >>>Of course most people know that you can loosen the >>>yolk and turn it 180 degrees but I have a BIG problem >>>with moving something that has gotten use to being >>>where it has been for years (and wants to stay there) >>>and that part of the picture tube has veerry thin >>>glass as we all know. So after looking the whole >>>problem over I decided to turn the entire tube over >>>and that would take care of the problem right???? - >>>WRONG!!! Since the high voltage connection on the >>>tube was now on the bottom it was apparently too >close >>>to the frame and shorted out the high voltage >damaging >>>the boards. I can't help but feel that there has to >>>be some simple way to change the input to the tube to >>>correct this but what is it?????
Choose Message Icon: [ View Emoticons ]

Notice: Copies of your message may remain on this and other systems on internet. Please be respectful.

[ Contact Forum Admin ]

Forum timezone: GMT-8
VF Version: 2.94, ConfDB:
Before posting please read our privacy policy.
VoyForums^(tm) is a Free Service from Voyager Info-Systems.
Copyright © 1998-2008 Voyager Info-Systems. All Rights Reserved.