Date Posted:18:30:10 04/02/09 Thu
It is Soldered onto the MPU Board. It has a + at one end and a - at the other (on the board) Send me an e mail address and i'll send you a picture of the MPU Board and battery. It should read 3.6 v. The battery has solder tabs on it. If it is weak or bad, your machine will not work and you will need to de-solder and solder on a new one- easy to do! If you have a bill validator, to make it work, you will need a "Set Chip' to activate it and set the denomination- also easy to do but you will need the eprom. -otherwise it will work but without the Bill Validator. I can walk you through any of this! take care.
>where is the battery located in the a players edge
>draw poker slot machine? i can not find it lol thank
>you...