Click here for an easy and free way to help protect endangered habitat at The Rainforest Site! Non-profit ad by Voyager
VoyForums

[ VoyUser Login optional ] [ Contact Forum Admin ] [ Main index ] [ Post a new message ] [ Search | Check update time | Archives: 1, [2], 3, 4 ]

Texas Drag Racing Buy and Sell Board






SELL SOMETHING? MAKE A SMALL DONATION









HELP KEEP TEXASDRAGRACING GOING

Subject: For Sale 91 Mustang Fox Body


Author:
joel
[ Edit | View ]
Date Posted: 15:17:33 11/13/12 Tue
I'm selling my 91 mustang was working on it little by little but got a second job and i don't have time for it anymore. the car has been sitting at my house for about 2years paint needs work and body work. Has a GT40 motor, tranny is an AOD but with a shift kit,high volume oil pump, BBK shorty headers, cold air kit, 3.73 gears, 75mm pro M mass air meter, mac pulleys, bullit rims, had the timing cover break but i replaced it but needs to be but back together and a new battery, also as a 100 shot of nos but i'm taking it off or if you want it i'll sell it with the car. make me an offer thanks for your time. (956-800-9574)

Replies:
Subject: Great Starter Home For Sale in Edinburg


Author:
Cesar Tamez
[ Edit | View ]
Date Posted: 10:36:21 01/05/13 Sat
Selling this Home I have had as a rental home for a couple of years and I might be needing the cash so its up for sale.


Address is
1005 Denver St
Edinburg TX 78539

3Bedroom
2 bath
kitchen
dinning
Living room

Home has a carport

Square Footage is
1100

Price is Set at 65,000 OBO
Cesar Tamez
956-393-7757

Uploaded from the Photobucket iPhone App
Subject: set of telestars centerline wheels for 5lug mustang


Author:
edgar e barajas
[ Edit | View ]
Date Posted: 06:26:52 01/05/13 Sat
I have a set front and back 15in. Telestar center line wheels onnly one front runner tire the rest dnt have tires only wheels I'm. Asking. $500 O.B.O you can reach me at 956-739-7466 will send pictures upon request thank you
Subject: weld wheels with mickey thompson e t drags


Author:
joe
[ Edit | View ]
Date Posted: 05:16:04 01/02/13 Wed
Complete set, front and back. 4 lug welds for fox body. Front runners are 4-inch with P195/65/15 tires. Rear 10-inch wheels with 28/10.5/15 Mickey Thompson ET drags.

These tires are slightly used with just a few passes. Selling all four tires and wheels for $800. Call anytime at (956) two. eight. three. 6083












Replies:
Subject: Mustang Parts


Author:
Jason
[ Edit | View ]
Date Posted: 22:28:29 01/03/13 Thu
1979-1993 Mustang 351 Swap BBK 1-3/4" Long Tube Headers (Chrome) Two weeks old. 300.00

T4 GT45 Turbo. New in box 250.00

1.6 Roller rockers 3/8 stud mount.

PA Racing front k-members (79-04 Fox/Sn-95 K-members) 80.00

Weld pro stars 15x8 5 lug ford 150.00 for the pair

Holley carb 650DP 100.00

956-336-0379
Subject: LS1 PARTS ETC


Author:
diesel doctor
[ Edit | View ]
Date Posted: 18:06:28 11/29/12 Thu
Cleaning out garage need all this gone asap,PAIR OF WELD PRO STARS 15X8 NO DENTS CAME OF 1971 CAMARO 125.00,--5 inch moster tach auto meter $25.00,,hurst quater stick with,trans brake button, cable ,bolted to aluminum box $40.00,,B&M shifter with dice knob $25.,,richmond gears for a ford 9 inch 4.10 gear ratio new in the box $65.00,,1967 to 1969 camaro,fierbird big block headers used good conditions $75.00,1969 camaro trans mount 2 of them 50.00,,wiring and ecm oem from 2000 ls1 camaro 150.00,,wiring andecm from a 2008 G8 6.0 liter $150.00,,GM TRUCK gear install kit pn#68621 new in the box 25.00,,aeromotive 1000 fuel pump not working 20.00,,G8 oem motor mounts 10.00,,G8 2008 v8 water pump 20,000 miles 50.00,water pump 2000 ls1 camaro removalble front pulley 65.00,,water pump reman for a 99 up gm truck v8 75.00,,4L60e oem oil pan and screen like new 15.00,,99 up gm truck coil packs 60.00,,99 up fuel rails and injectors oem 10.00,,front cover housing 4.8 ,5.3 FRONT CAM SENSOR 10.00,,G8 2008 oem exhaust manifolds 20.00,,2003 gm truck oem intake manifold with oem throlttle body 40.00,,OIL PAN G8 2008 6.0 LITER PN#12616857 65.00,,OIL PAN NEW PN# 12624617 EXTRA LOW PROFILE 65.00,,OEM OIL PAN 99 UP GM TRUCK 30.00,,OEM CRANK PULLEY GM TRUCK 99 UP 5.00 ,OEM CRANK PULLEY 2000 CAMARO LS1 20.00,,IF INTRESTED CALL ME AT 956-TWO ONE 2-TWO FOUR,SEVEN EIGHT

Replies:
Subject: head bolt bushings 20pcs


Author:
marco
[ Edit | View ]
Date Posted: 15:07:12 12/03/12 Mon
head bolt bushings 20pcs part# tfs-51400419. these bushings are for useing ford 351 heads on a ford 302 block and useing your 302 bolts. asking price $30 FIRM.. call or txt 956-312-7141, please no txt or calls after 11pm. brand new never installed or taken out of package. thank you.pics can be seen on craigslist,brownsville,tx. autoparts

Replies:
Subject: For Sale: 9 sec Mustang coupe


Author:
Juan
[ Edit | View ]
Date Posted: 00:13:33 01/02/13 Wed
93 mustang original 5.0 coupe clean title.410 stroker, victor Jr head and intake, solid roller cam, built c4, 10 point cage, Upr k-member with A arms and coil overs, built 8.8 rear end, Upr anti roll bar..too much to list. Turn key $15,000 or will sell roller for $7,500 firm. Video on YouTube under Juanio green coupe.. ran a 9.50@139mph. For pics or info call 739-4836.
Subject: 9 Sec Turn Key Trans Am for sale


Author:
Cesar Tamez Warbrd
[ Edit | View ]
Date Posted: 16:45:06 12/14/12 Fri
Ok I really dont want to do this but I have other plans right now and need to put my car up for sale car has gone 9.61 at 141 taking it easy on the tune and on the nitrous here is a list of the Many things the car has I might be forgetting a thing or two but I will do my best not to:

1998 Trans Am Black

Motor
Forged 346ci Nitrous Built by HKE motor is good up to a 500 shot with proper tuning Stock Balance and Polished Crank
Mahle Pistons
Scat Rods
Custom HKE Cam
HKE Springs
11/32 HKE push rods
Custom Ported 243 Heads
Jessel Rockers
Ported Super Victor Intake with Edelbrock Fuel Rails
Fast 92mm TB
Custom Elbow from Norbilt Turbo Fab
Meziere Electric Water Pump
60Lbs injectors
Kooks 1 7/8 stepped to 2" to a 3 1/2 outlet
SFI balancer
Custom relocation of coils
Griffin Radiator
Derale Fans
Lockar Dip Stick
TCI FlexPlate
All ARP Hardware

Transmission

TH-400 from Xtreme Transmissions with all Upgrades
Pro Edge Converter from Edge Racing
Derale Trans Cooler with Fan
B&M pro ratchet Shifter
Trans Brake
Custom Drive Shaft

Suspension

UMI K member (Chromoly)
UMI double Adjustable Upper and lower Control Arms (Chromoly)
QA1 Coil overs
Mad Man Tavel Limiters
Mad Man SYA bars
UMI Torque Arm (chromoly)
UMI SubFrame Connectors (chromoly)
UMI Pan Hard Bar (chromoly)
BMR Crosmember
Wolfe Antiroll Bar
Strange Rear Drag Shocks
8.50 roll cage with window net
Kirkey Seats with pro Covers

Quick Performance 9 Inch Differencial
Morser Axles and Center section
Full Spool
4.11 Gears

Nitrous express 2 Stage 4150 Plate
Lightning noids
nitrous outlet Dedicated Fuel system
NOS Nitrous Bottles
Nitrous Outlet Billet Bottle Brackets
A1000 Fuel System
5Gal Aluminum fuel Cell

Phantom II Gauges
SJM ABS Delete Kit
Bogarts D-10 Bolted
Katech Tensioner
Burkhart quick release Steering wheel
VFN 5" Sloped hood
Custom Removable bumper
2002 PCM and Wireharness
AN Lines on everything Transmission Cooling

Car weighs 3050 lbs with out driver

Price is $20,000 Turn Key 9 Sec car
Uploaded from the Photobucket iPhone App
Cesar Tamez
956-393-7757

Replies:
Subject: Car hauler two axles $950


Author:
Joe
[ Edit | View ]
Date Posted: 19:23:22 12/28/12 Fri
Car hauler two axles new wood floor 2 5/16 ball hinge. $950 call any time at (956) Two. Eight. Three. 6083











Replies:
Subject: Mickey Thompson Sportsman Front Runners!!! ASKING $220.00 for both


Author:
Luis
[ Edit | View ]
Date Posted: 11:46:25 09/08/12 Sat
Mickey Thompson Sportsman Front Runners!!! 26x7.5-15 8PLY
The 4-ply design will support most cars while a stronger 8-ply design is available in a 26'' x 7.5'' - 15LT for use on cars 3000 lbs. or heavier.
ASKING $220.00 for both

Replies:
Subject: 93' mustang coupe For Sale $2250


Author:
Joe
[ Edit | View ]
Date Posted: 13:51:39 12/25/12 Tue
93' Mustang Blue Coupe. 4 Cylinder, Automatic, A/C works, Good running condition, Plates and inspection tags are up to date. Car is nice and clean. Clean title at hand. Good daily driver.
$2250 Call Anytime. 956 two. eight. three. 6083.

















Replies:
Subject: carhauler $1150


Author:
joe
[ Edit | View ]
Date Posted: 12:59:52 12/24/12 Mon
Car hauler two axles new wood floor 2 5/16 ball h. call any time 956 283 6083

Replies:
Subject: bbc 71 chevelle headers and roller rockers wanted


Author:
howard
[ Edit | View ]
Date Posted: 10:20:35 12/25/12 Tue
looking for headers and roller rockers for a big block chevy,headers need to fit 71 chevelle,elcamino chassi.if anyone has some post a reply will get back to you thanks
Subject: 93 mustang coupe for sale


Author:
joe
[ Edit | View ]
Date Posted: 10:07:40 12/25/12 Tue
93 blue coupe rust free nice and clean 4cylinder automatic ac works nice set of tires and rims nice interior . I haven't figured out how post pics on this site clear title at hand i can text pics if interested $2250. Call any time 956 283 6083
Subject: carhauler $1150


Author:
joe
[ Edit | View ]
Date Posted: 12:50:10 12/24/12 Mon
Two axles new floor , 2 5/16 call any time 956 283 6083
Subject: For sale : Kenne bell 20 amp Boost-A-Pump in good condition $170 Obo if interested call or text 955-607-9929


Author:
Rick
[ Edit | View ]
Date Posted: 09:31:05 12/05/12 Wed

Replies:
Subject: 89 Mustang Hatch lx Roller for sale.


Author:
Jason
[ Edit | View ]
Date Posted: 11:33:28 12/20/12 Thu
Up for sale is a 89 Mustang Hatch with a 93 cobra kit and is painted the cobra red. Car has a full 10 point cage, Racing seats, tubular K member, Flaming river rack, fuel cell, pump and lines. cowl hood. would make nice for a great project.Please call or text for more info I can send pics if you like. This is just a roller. Price is 2500.00 firm... Jason 956-336-0379
Subject: nitto 555r drag radials/ nitous express wet system


Author:
howard
[ Edit | View ]
Date Posted: 08:19:43 12/20/12 Thu
have a like new set of nitto 555r drag radials less than 500 miles.300.00 obo...nitrous express wet efi system,currently installed on my mustang,comes with everything needed to hook up and run.200.00 obo 956-873-0911

Replies:
Subject: bbc blower hub and pulleys


Author:
howard
[ Edit | View ]
Date Posted: 08:12:16 12/20/12 Thu
looking for a blower crank hub for a bbc,and pulleys,looking for pulleys in the 10 to 15 psi range.if any one has some let me know how much thanks. 956-873-0911
Subject: wtb Ford canfield /jegs street heads


Author:
tony
[ Edit | View ]
Date Posted: 20:35:47 12/19/12 Wed
I am looking for a set of sb ford 18* canfield /jegs street heads. These heads under jegs name .part # 51490 and canfield 18/350 or 18/450
Subject: Wtt


Author:
Jose
[ Edit | View ]
Date Posted: 20:25:57 12/19/12 Wed
Wtt my new 750 holley carb its only been used to turn on my project, I need a holley ,650 ,570 ,670 street avn.
9562321448
Subject: For Sale: Fore inovations return less fuel system


Author:
Juan
[ Edit | View ]
Date Posted: 19:35:01 12/19/12 Wed
fits 03-04 mustang cobra, complete with billet fuel hat and dual super car pumps,fuel rails, 8an line and filter, dual fpdm upgrade..asking $700. cell# 739-4836
Subject: parts for sale


Author:
Lupe(ExileSS)
[ Edit | View ]
Date Posted: 20:45:30 12/16/12 Sun
pair of valve covers old school chevy small block tall style $20

BBK power pulleys for small block chevy old school crank, water pump and alternator even throw in the belts for them comes with a one inch belt and one v belt for power steering $80

pair of 295/50/15's one is 95% life and the other about 50% still good tires $85

small block ford 351w flat tap crane cam 500/520 lift $20

fox body 4inch cowl hood bolt on is damaged $50

text or call me 956 975 8419
can send pix

prices are best offer or make offer

Replies:
Subject: Fox Mustang Supercharge


Author:
Jesse
[ Edit | View ]
Date Posted: 21:20:33 12/18/12 Tue
Paxton novi 1000 2belt system 86-93 fox mustang in working order with 8in crank pulley upr boost pipe fmu bypass valve all brackets and necesary hardware and ford racing boost gauge with a 255 walbro fuelpump 1600 obo Also trickflow street efi intake brand new black upper with 70mm throttle body includes lowern gaskets 450 obo .Explorer gt 40 intake 120 obo Also 5.0 explorer short block with approx 70,000 miles 200obo also t5 trans in working order with mgw shifter 450obo summit ready to run 86-93 distributor 120 firm will not seperate sc or intakes call jesse at 9564457673
Subject: 5.0 parts trade: want to trade a 5.0 mass harness, c & L meter, cold air kit and gt-40 intake with 65mm throttle body w/ injectors for a carb intake and carb set up?


Author:
phil(393-7039)
[ Edit | View ]
Date Posted: 16:05:12 12/18/12 Tue
anyone want to trade a 5.0 mass harness, c & L meter, cold air kit and gt-40 intake with 65mm throttle body w/ injectors for a carb intake and carb set up?
phone/text: 956-393-7039.
Subject: Turbo parts for sale


Author:
Juan
[ Edit | View ]
Date Posted: 22:59:15 12/15/12 Sat
I have an emusa 50 mm blow off valve with 3" inch pipe adapter $100
Also a 38mm waste gate with all vbands brand new $60

Also a -10an braided return line with turbo fitting and oil pan fitting $60

All is new never used. Good for a budget build. Txt for pics 956-532-1439 can also work out a deal for everything
Subject: gt40 tubular intake


Author:
joey
[ Edit | View ]
Date Posted: 19:03:40 12/13/12 Thu
up for sale is a gt40 tubular intake..asking $400 firm..956-970-1035 for pics..intake is located in Harlingen..
Subject: PARTING OUT 1996 MUSTANG COBRA (no body)


Author:
SPIKE281
[ Edit | View ]
Date Posted: 16:32:54 12/12/12 Wed
Im parting out a 1996 MUSTANG COBRA for parts ONLY!!!!! THE BODY IS NOT FOR SALE so please dont ask.
EVERYTHING ELSE is for sale transmission is gone, Engine is still their and so is the rear end, it also has some performance bolt-on parts

of the top of my head here are some parts

* C&L cold air intake with Pro-M mass air meter
* Underdrive Pulleys
* Steeda Timing Adjuster
* 3in. X-pipe with 3in. Flowmaster mufflers
* 8.8 Rear Differential with 4:10 Gears
* Lowering Springs
* Screaming Demon Coil Packs
* Ported Throttle Body
* Subframe Connectors
* Spec Clutch and Disc for T45 or T5
* Koni Shocks

also this is a good swap if u have a GT or a V6 and u want to do a COBRA ENGINE SWAPand get those extra HP numbers!!!!
if intrested in the engine swap for ur car let me know and ill include **** ENGINE, HARNESS, & ECU ****
or let me know if ur just intrested in HEADS, BLOCK or INTAKE

MOTOR SPECS:

* 4.6 / 281
* DOHC HEADS
* Aluminum Short block
* Cobra Intake

car does have some 18in. anthricite bullit wheels with 18x10 if im not mistaken.

jut text me with any part u may need, ALTERNATOR, RADIATOR, FAN AOR ANYTHING AT ALL EXCEPT WHAT I METIONED

i can send pics upon request of the car but like i said I WILL NOT SELL IT COMPLETE, NOT SELLING BODY, NO INTERIOR ALSO,

MOTOR IS IN GREAT CONDITION AND LIKE I SAID THIS IS A GOOD SWAP INTO EAITHER UR V6 OR GT.

TEXT ME ANYTIME ONLY AT: 956-456-0971

PLEASE NO EMAILS AND NO SPAM!!!!
Subject: Looking for Slicks


Author:
Leo
[ Edit | View ]
Date Posted: 11:22:10 12/12/12 Wed
I am looking for some 28x10.5x15 slicks M/T true 10.5 USED I just need them for mocking up.. I can rent them for one day, borrow or buy them..

I am fixing to buy some ,but need to verify if they clear my tub on my mustang...

If you have some semi new I can buy them ,but I would have to try them on first..

You can e-mail me or post up
LSBCVS@yahoo.com
Subject: 87-93 lx hatch mustang


Author:
ramon
[ Edit | View ]
Date Posted: 13:03:57 12/11/12 Tue
for sale 87-93 hatch mustang mini tub has 456 ford racing gears mini spool 28 spline moser axels qa1 coil over all ready on rear end has 8 point roll bar has front drag launch springs has subframe connectors and rearend reinforce also has lower control arms if interested call ramon 956 466-9678 body has no rust floor has no rust price is $800.00 or best offer if interested car is located in brownsville texas
Subject: 78 trans am with a 455......4 speed


Author:
brian
[ Edit | View ]
Date Posted: 19:46:51 12/09/12 Sun
true trans am factory 4 speed car. very clean rust free. runs great i just don't have the room to keep it...$4500 firm..........578-9038
Subject: For sale or trade


Author:
Josr
[ Edit | View ]
Date Posted: 11:14:55 12/09/12 Sun
I have a new never used 750 holley carb its vac sec asking $250
Or trade tell me what u got
9562321448
Subject: for sale


Author:
PeteM
[ Edit | View ]
Date Posted: 08:23:56 12/08/12 Sat
I have some items for sale.
1) e303 cam for 302/351 $150 obo.
2) Lakewood scatter shield/bellhousing for t5/sf. $175obo
3) New 4" bullet race muffler $60obo.
If interested you can textbme at 956-655-2291
Subject: transmission


Author:
rey
[ Edit | View ]
Date Posted: 22:22:14 11/21/12 Wed
i am looking for some parts for a 727 dodge transmission...output shaft and rear housing...text or call me at9five6nine6six0four1one..thanks

Replies:
Subject: long tube headers


Author:
stang
[ Edit | View ]
Date Posted: 18:10:18 12/01/12 Sat
Looking for long tube header for 1990 mustang. Please let me know if u all have some... thanks

Replies:
Subject: 71 firebird for sale or trade


Author:
jg
[ Edit | View ]
Date Posted: 08:33:00 12/05/12 Wed
i have a 1971 firebird, new 400 pontiac motor with an edelbrock 750 and a performer rpm intake,headers,new tranny,new exhaust,new brakes and lines ,new carpet,new weatherstrip,new rims and tires, also has a full set of autometer phantom gauges,speedo,tach oil,water and amps..has a brand new aluminum radiator ...i have a stack of receipts to go along with the car,the car needs a new windhsield ,very minor crack,i have ordered a new one,all tags are current and good till next year..i use this car as a daily driver..just needs a headliner,the headliner that is in it needs a lil attention,very nice car..call or text 979-318-112six
i am really wanting to trade for 67-73 camaro, corvette, gto,chevelle,nova or anything tubbed out or pro street cars..email me with what you have
[IMG]http://i12.photobucket.com/albums/a221/joejoes/IMAG0884.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a221/joejoes/IMAG0886.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a221/joejoes/IMAG0885.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a221/joejoes/IMAG0887.jpg[/IMG]
Subject: Leave Nothing On The Table For 2013


Author:
Pat Collins
[ Edit | View ]
Date Posted: 21:19:41 12/04/12 Tue
For the Serious Racer Only, that’s looking to leave nothing on the table in their racing program and wants only the very best possible performance solutions. You have two options to consider for your program for the upcoming 2013 racing season.

Option #1 if you currently run a MSDŽIgnition 6 series analog box with a Blaster 2 coil. And if your competition has the same setup as yours, here’s your chance to take your program to the next level. This package has the same foot print as a MSDŽIgnition 6AL with a 30% greater energy output with faster triggering as well. With this install a typical end result after proper tuning should be 1 to 3 hundredths improvement. This setup in your program allows you to access what your engine builder gave you. You have always had it under the hood you just have never used it.

These systems we’re using have (10 hours or less of run time) and are MSDŽIgnition systems from a major racing series. Once we have them in house they are gone through and each ignition box is performance matched with the correct ignition coil for the best track results. The typical turnaround time once an order is placed runs 7 to 10 days. The cost is $375 which includes standard shipping in the lower 48 states.

Option #2 the next upgrade to consider adding is the Maxpwr20 Voltage Regulator. After installing a Maxpwr20 you will have a quicker triggering MSDŽIgnition box and a more stable current supply. The improvement that was seen when moving to a 16 volt setup can be seen again moving up to 20 volts. A typical end result after tuning is completed should be a 3 to 5 hundredths improvement. The Maxpwr20 Voltage Regulator will work with any of the following MSDŽIgnitions 6A, 6T, 6TN, 6AL 6ALN, Digital 6,6al2, 7AL2,7al3,and the Digital 7’s. The cost of the unit is $400 which includes standard shipping to the lower 48 states.

From 12/4/2012 to 12/31/2012 if you order both options the price is $675 which still includes standard shipping to the lower 48 states.

You need to see the video: http://www.youtube.com/watch?v=mlrmRBK0uCc
Info on Maxpwr20 can be found here: www.techwestracing.com/page21.html

Pat Collins

704-995-4286
Subject: need slicks and aluminum race wheels


Author:
manny
[ Edit | View ]
Date Posted: 22:18:44 12/03/12 Mon
need slicks and race wheels for my 02 gt txt me also looking for performance parts for it thank u 956-209-3834
Subject: for sale or trade


Author:
jose
[ Edit | View ]
Date Posted: 13:19:54 12/03/12 Mon
i have foxbody parts and 2 holley carbs for sale or trade
carbs r 750 vac sec one is used and one new never used
180 used
250 new
foxbody dashboard,center consul, steering wheel complete,gt quarter windows,gt wing,8.8 stock posi unit, 5.0 oil pan, stock forage pistons and rods, make offer i have no use for these parts
im looking gor 5.0 ho complete motor and a aod or t5 tranny
call or text at 956-232-1666
Subject: ported gt40 heads


Author:
marco
[ Edit | View ]
Date Posted: 07:58:12 11/12/12 Mon
im selling some ported gt40 heads in good condition they do not have valve springs & the bolt holes are 1/2 inch. asking $240 O.B.O. call or txt 956-312-7141 please no calls or txt after 11pm, thank you. pics can be seen on craigslist, brownsville,tx under auto parts.

Replies:
Subject: 26x11.5-15 ET Streets


Author:
93SVT
[ Edit | View ]
Date Posted: 16:57:39 11/30/12 Fri
Selling a pair of m/t et streets 90% thread left asking $220 FIRM NO TRADES CALL/TXT 956245sixthreeonesix no calls/txt after 10pm
RIMS NOT FOR SALE!!!!!!!


Subject: 1996 V8 Ford Ranger


Author:
DPS Coupe
[ Edit | View ]
Date Posted: 11:12:29 11/29/12 Thu
************* THIS TRUCK WILL BE AT SNAPKAS ON LEOPARD THIS FRIDAY 11-30-2012******************

I hate to do this cuz this is my dream cruiser, but its gotta go. Its a 1996 with a 306 SBF with a 5 speed transmission. Its a wicked ass little truck and fun to drive. It sounds, drives, and hooks up like a foxbody stang. Anyways, Its got tons of new parts on it and its ready to go. Im asking $5500 for it OBO clear title. Let me know if your interested, Thanks in advance guys 361-for for3-01five three.

http://corpuschristi.craigslist.org/cto/3407941531.html
Subject: Lifted Jeep Wrangler 2012


Author:
DPS Coupe
[ Edit | View ]
Date Posted: 11:10:50 11/29/12 Thu
Im selling my 2012 Jeep, its only got 3100 miles on it, 4 inch rough country lift, dual steering stabilizer, 15x10 wheels, 35 inch BFG mud terrains, 6 speed transmission with a 3.6 liter V6 290hp
If interested please shoot me a text 361-for for three-015 three
Asking $25,000

http://corpuschristi.craigslist.org/cto/3442723885.html
Subject: 347ci sbf Pics added


Author:
JASON
[ Edit | View ]
Date Posted: 21:56:58 11/28/12 Wed
What I have for sale is a freshly built balanced and blue printed 347ci sbf. It consists of a probe street fighter rotating assembly, Sfi 28oz balancer, 28oz flywheel. All balancing and assembly was done by John Hamilton at Mission Racing in San Antonio,TX. Short block is fresh and ready to go. Rings are gapped to handle a 150shot of spray. Pistons are flat tops and will work with inline/twisted wedge heads. Asking $2000 ono. CASH TALKS!! Text 361-232-two five two six for more info.

Photobucket
Subject: mustang 5.0 parts wanted


Author:
rafa
[ Edit | View ]
Date Posted: 22:04:39 11/26/12 Mon
I'm looking for the following parts if anybody had some they wanna sale text me at 956-463-1119

Shorty headers
30lb injectors
Mass air for 30lb injectors
Control arms
Pedestal mount roller rockers
Front seats black if possible
Coil overs
A arms
Tubular k member

If u have this parts for sale hit me up thanks
Subject: 87-93 draglights 4lug


Author:
Bruno
[ Edit | View ]
Date Posted: 16:11:59 11/19/12 Mon
Foxbody runners in front n 8 in back no back tires 450 obo

Replies:
Subject: Looking for 8.8 4 lug


Author:
Ramon
[ Edit | View ]
Date Posted: 22:32:32 11/23/12 Fri
Looking for 4 lug 8.8 31 spline with spool and c clip eliminator moser, strange call 956-466-9678

Replies:
Subject: Looking for 8.8 4 lug


Author:
Ramon
[ Edit | View ]
Date Posted: 22:30:11 11/23/12 Fri
Looking for 4 lug 8.8 31 spline with spool and c clip eliminator moser, strange
Subject: 351 intake


Author:
PeteM
[ Edit | View ]
Date Posted: 18:08:29 11/20/12 Tue
Selling pro products 351 Windsor single plane intake. This is victor Jr style and is polished. I did start to port it on one runner but never got around to finish it. Asking $150 obo. You can text me at 9566552291.
Subject: For Sale


Author:
PeteM
[ Edit | View ]
Date Posted: 09:16:21 11/09/12 Fri
Proform water pump black for 302 Ford mounted but never ran. Asking $160.00 Also have two trickflow -10 black billet fuel filters new. One is a 100 Micron asking $65 and the other is a 10 Micron asking $55. If interested you can text me at 9566552281

Replies:
Subject: !!!!!!!!!!!! want to buy slicks !!!!!!!!!!!!!!!!!!!!!!!!!!!!!


Author:
manny
[ Edit | View ]
Date Posted: 19:57:35 11/19/12 Mon
need slicks will perfer 16 inch but open for any ill take em off u thank u txt me at 956-209-3834
Subject: need gone 16inch chevy rims and subs and truck box


Author:
manny
[ Edit | View ]
Date Posted: 19:51:41 11/19/12 Mon


Like title says need them gone 16 inch oem chevy rims I'm asking 200$ just need a little wash and good to go also have a pair of 10 inch subs quantium audio with chevy single cab ported box I'm asking 200$ need them gone but willing to trade for silverado parts txt me at 209-3834
Subject: 87-93 mustang parts


Author:
Bruno
[ Edit | View ]
Date Posted: 16:26:31 11/19/12 Mon
Selling some draglights 3.5 front n 8 in rear also have a hatchback n other parts n interior parts 956-536-2184
Subject: wts/wtt


Author:
jose
[ Edit | View ]
Date Posted: 17:56:20 11/18/12 Sun
Sbf udrive pulleys its only crank and alt. 9562321666
Subject: Best Kept Secret in Racing 50% off!


Author:
Pat Collins
[ Edit | View ]
Date Posted: 13:52:34 11/18/12 Sun

Best Kept Secret in Racing 50% off!
Demo unit clearance, there are 10 used Tracs devices that were used at private test sessions during the 2012 racing season. They have all been tested and are ready to be installed in your racing platform. Give me a call if you would like to save 50% over the price of a new unit. $200 plus shipping.
Traction Control in the class? Want a solution? Then you want to check out The Best Kept Secret in Racing! TRACS reduces a MSDŽIgnition systems output by 25%, which decreases engine performance by 10 to 12 percent. Interested? http://www.techwestracing.com/page20.html
Thank you for taking the time to read this post.

Pat Collins

704-995-4286
Subject: TIRES (ET Streets or Slicks)


Author:
Howard
[ Edit | View ]
Date Posted: 06:48:33 11/16/12 Fri
I am looking for a set of ET Streets or Slicks new,used, if the price is right. No bigger than 15x10 a 28 or 29 inch tall..Let me know if you have a set that only have a couple of passes left can use them..Thanks 956-873-0911

Replies:
Subject: **** for sale: pair (2) ford / mopar prostars in great shape!! Wheels only... 15x8, 5x4.5, 4.5 backspace... Text me...


Author:
956.207.5592
[ Edit | View ]
Date Posted: 11:47:05 11/17/12 Sat
Subject: **** i am lookin for some bbc fender well headers... Please text me pics!! (Thumbs up!!)


Author:
956.207.5592
[ Edit | View ]
Date Posted: 11:41:50 11/17/12 Sat
Subject: T5 TRANNY NEEDED.


Author:
JORGE
[ Edit | View ]
Date Posted: 19:09:05 11/13/12 Tue
hey guys , i need a T5 transmission ,if anyone have it let me know thank you, 956-346-9329.jorge.
Subject: hoods


Author:
Lupe(ExileSS)
[ Edit | View ]
Date Posted: 23:20:02 11/12/12 Mon
got two hoods both off a fox body mustang one is a stock steel hood painted flat black $20

also a 4 inch fiberglass cowl hood bolt on also painted flat black but it is damaged from inside the frame part of the fiberglass $40

text or call 956 975 8419 can send pix
Subject:
"AACA CAR SHOW & SWAP MEET"


Author:
Mod
[ Edit | View ]
Date Posted: 20:19:32 11/12/12 Mon





Subject: foxbody LX Mustang Tail Lights with case and bolts....Comolete


Author:
90 LX
[ Edit | View ]
Date Posted: 13:00:13 11/12/12 Mon
Tail lights have been resealed and ready to bolt on...
Asking $85.00

I can txt pics 956 463 7953
Subject: Engine For Sale


Author:
Darrell
[ Edit | View ]
Date Posted: 00:21:11 11/12/12 Mon
427 BBC longblock plus. Forged rotating assembly 12.5 to 1 compression. Rectangular port iron heads with severe duty valves and titainium retainers. Solid roller cam and stud girdle. ARP main and head studs. Diamond stripper windage tray with deep 3/4 length sump oil pan. No timing chain cover or intake. $2200.00 956-873-3464
Subject: chevy 350 long block with mods and other parts


Author:
78 t/a
[ Edit | View ]
Date Posted: 16:20:14 10/29/12 Mon
chevy 350 with world products sportsman 2 heads, brand new comp mutha thumper cam and new timing chain. the bottom end is stock other than the cam. the intake is a victor jr intake and stock distributor. the motor needs the oil pan resealed and timing chain installed whick i have. $700..........also have an edelbrock performer intake an great shape $50......brand new chevy aluminum sheet metal style valve covers really nice $50, i will seperate if i have enough interest..............578-9038

Replies:
Subject: Looking For SBC Alum Heads


Author:
James
[ Edit | View ]
Date Posted: 23:58:48 11/10/12 Sat
Looking for a pair of aluminum heads for a SBC, let me know what you got, thanks. 95622one219six
Subject: WTB 285/75/16 tires


Author:
Cris 956-543-7642
[ Edit | View ]
Date Posted: 14:56:34 11/10/12 Sat
WTB 285/75/16 mud or A/T tires in good shape call or text
Subject: Tail lights


Author:
Jason
[ Edit | View ]
Date Posted: 10:57:23 11/10/12 Sat
Looking for some 87-93 LX Tail lights. cash in hand. call/txt 361-232-2526
Subject: outlaw hood forsale 6 inch 87 93 mustang 300 obo 956 351 7014 randy


Author:
randy
[ Edit | View ]
Date Posted: 13:27:31 09/21/12 Fri
6 inch outlaw hood for 87 93 mustang 300 obo 956 351 7014 randy

Replies:
Subject: For Sale


Author:
PeteM
[ Edit | View ]
Date Posted: 17:52:18 11/09/12 Fri
Selling my recently rebuilt 351 Windsor shortblock. The balancing and.machine work was done by motor mart machine shop. It's balanced to 28oz and was built using new forged srp pistons with fee floating pins. Doesn't have camshaft but does come with a steal main stud girdle.and hv melling oil pump driven by arp shaft. Also to go with it will be a double roller timing set which was also just installed and a set of 1/2 arp head studs. Asking $850 obo. If interested you can text me at 956-655-2291
Subject: for sale or trade


Author:
jose
[ Edit | View ]
Date Posted: 12:11:11 11/09/12 Fri

Fs or t 05 suzuki gsxr600 bads r rear brake pads has a scratch on a side
Guy i got it from said its camed tune hid lights bike is nice and does run and sounds strong
$3300 or trade tell me what u have
Car,truck,motor/tranny ect.
9562321666
Subject: Looking for SBF heads


Author:
Santos
[ Edit | View ]
Date Posted: 23:17:31 11/07/12 Wed
Looking for some SBF heads cast iron,aluminum doesn't matter would like to find some E7 power heads. Let me know what you got and how much you want thanks.

Replies:
Subject: Denny's Custom Driveshaft "Nitrous Ready" Series


Author:
Eric Sepulveda
[ Edit | View ]
Date Posted: 11:15:15 08/07/12 Tue
I have a Denny's Driveshaft, it was on my Mustang a few years back, it has a Strange Billet 26 spline slip yoke, its their Nitrous Ready Series. These go for over $650, its in my garage and I dont need it. It was on a Fox body with a C4 to Ford 9". Its like new. call or text im in Harlingen.

281-250-9596

Replies:
Subject: Ford Racing Pan and pick up


Author:
Leo
[ Edit | View ]
Date Posted: 20:38:15 10/11/12 Thu
I have here a brand new Ford racing deep rear sump pan and pickup tube +tray.. This pan fits all 351w blocks including dart,svo,boss blocks with 4 bolt mains.. It came with my crate engine ,but dont need it because I needed a front sump which I already bought..

Pickup sells for 83 bucks Part # M-6622-DRS351
Pan with tray sells for 520 bucks Part # M-6675-DRS351

The first 300 takes it FIRM Half price
Photobucket>Photobucket>

Replies:
Subject: LOOKIN FOR


Author:
SABAS
[ Edit | View ]
Date Posted: 15:45:38 11/05/12 Mon
im looking for a ls6 cam n ls6 intake any one got any idea wer i can find them tx me 746-9951 thanks!!!!!
Subject: 347 sbf


Author:
Black5.0
[ Edit | View ]
Date Posted: 18:38:33 11/04/12 Sun
What I have for sale is a freshly built 347ci sbf. It consists of a probe street fighter rotating assembly, Sfi 28oz balancer, 28oz flywheel. All balancing and assembly was done by John Hamilton at Mission Racing. Short block is fresh and ready to go. Rings are gapped to handle a 150shot of spray. Pistons are flat tops and will work with inline/twisted wedge heads. Asking $2000. CASH TALKS! Call/text 361-232-2526
Subject: 4-Lug WELD Draglites for Fox Mustang


Author:
90 LX
[ Edit | View ]
Date Posted: 19:37:47 10/19/12 Fri
FRONT: 15X3.5 tires almost new

REAR: 15X8. HOOSIER SLICKS are 26x8s with 10 passes since new

Asking $650.00

956 463 7953

Replies:
Subject: wtb cowl hood


Author:
Lupe(ExileSS)
[ Edit | View ]
Date Posted: 23:58:18 11/02/12 Fri
looking for a cowl hood for a fox body mustang 3 or 4 inch cowl hood bolt on or lift off

text or call 956 975 8419

please send pix too
Subject: Crane stud girdles


Author:
J.R.
[ Edit | View ]
Date Posted: 15:27:48 10/17/12 Wed
Set of Crane stud girdles(used)for chevy big block. Asking 200.00 [cell#6408633]

Replies:
Subject: For Sale: Trick Flow R EFI intake


Author:
Juan
[ Edit | View ]
Date Posted: 14:05:43 11/01/12 Thu
for 5.0L mustang, polished.. $450. cell# 739-4836
Subject: WTB Monster Tach with light


Author:
Leo
[ Edit | View ]
Date Posted: 18:33:22 10/11/12 Thu
Looking for Monster tach It must be from Autometer.. Let me know if you have one and want to get rid of it..

Replies:
Subject: Ford racing/canton fox 351 swap pan, e303 cam


Author:
Tito
[ Edit | View ]
Date Posted: 13:57:42 11/01/12 Thu
Brand new in box 351 swap pan 100 firm, used e303 cam 100. Text Tito @(956)884-1915. Thanks
Subject: Built Foxbody


Author:
Slols1
[ Edit | View ]
Date Posted: 16:46:07 08/29/12 Wed
I just got this car, but I've decided to get out of cars for awhile. This car is fully built and went 8.60s with the previous motor. It has completely rebuilt motor with no more than 100 miles on it and no nitrous through it. The motor is a fully forged 347 with AFR 205 heads, roller rockers, edelbrock performer RPM intake, brand new Proform 750 carb, new MSD billet distributor, new fluidyne radiator, new black magic fan, ceramic coated headers, retard box, 3 step box, NOS plate system, fully built th350 with Transbrake, built 9" rear with 4.10s and aerospace brakes, new 5 gallon fuel cell, line lock, MSD ignition box, tubular kmember, and alot more that I'm sure I'm forgetting.

The car just got a full cobra body kit installed and a new paint job. Still has factory dash, door panels, wiring harness, headliner, and driver door power window still works. All the lights work on the car so no reason you couldn't put it on the street. The car has been certified for 8.50 and slower. Still has the tag on the cage for certification.

I'm starting at $12k with not alot of wiggle room.

Pm here and I'll give a number for more pics and info.

[IMG]http://i193.photobucket.com/albums/z51/projectfreedom/e07f0348.jpg[/IMG]
[IMG]http://i193.photobucket.com/albums/z51/projectfreedom/17d2c2c7.jpg[/IMG]
[IMG]http://i193.photobucket.com/albums/z51/projectfreedom/2410fb50.jpg[/IMG]
[IMG]http://i193.photobucket.com/albums/z51/projectfreedom/7a7915a8.jpg[/IMG]
[IMG]http://i193.photobucket.com/albums/z51/projectfreedom/88b61f49.jpg[/IMG]
[IMG]http://i193.photobucket.com/albums/z51/projectfreedom/569ef4d4.jpg[/IMG]
[IMG]http://i193.photobucket.com/albums/z51/projectfreedom/A84A7175-0984-4675-8A76-06582F84944E-3283-000001F5C725915A.jpg[/IMG]

Replies:
Subject: Parts For Sale


Author:
Darrell
[ Edit | View ]
Date Posted: 23:14:03 10/28/12 Sun
350 short block .060 overbore new cast flattop pistons,rings and bearings new hyd cam and timing chain set $550.00 462 casting heads complete $400.00 454 shortblock .030 overbore new forged pistons (10 to 1) compression,cast crank,rings and bearings less connecting rods $750.00 9565259870
Subject: WTB CATS


Author:
Lupe(ExileSS)
[ Edit | View ]
Date Posted: 21:25:04 10/28/12 Sun
looking for two pair's of catalytic converters 3in and 2.5 dont matter if there gutted new or used

text me at 956 975 8419
Subject: Mustang Drag Setup 4 Lug Centerlines - $375


Author:
Romeo
[ Edit | View ]
Date Posted: 16:23:23 10/28/12 Sun
Ford Mustang 4 LUG Centerline Convo Pro Street Wheel Drag Setup... 375 OBO

Fronts are 15x3.5 with tires
Rears are 15x8 1/2 WITHOUT TIRES

These rims will include centercaps and valvestems are metal not the rubber kind..

PRICE IS FIRM BUT SHOOT ME REASONABLE OFFERS...

These go for over 200 each plus tax on JEGS.COM

Car pictures are for illustration purpose..Its for you to get an idea of what they can look like on your mustang..

Reason for selling: Going 5 Lug and already have Pro Stars for my car....


Pics can be seen on the link below..


http://mcallen.en.craigslist.org/pts/3323289034.html
Subject: BBK Underdrive pulleys


Author:
Lupe(ExileSS)
[ Edit | View ]
Date Posted: 11:09:26 10/28/12 Sun
have a complete set of billet aluminum BBK underdrive pulleys part# 129-1598 they fit for camero/firebird/monte carlo, c/k 85-87 305-350 i do have the belts for the alt to water pump and crank and crank to pwr str pump.

$100

text or call 956 975 8419
can send pix
Subject: BIG BLOCK PARTS FOR SALE


Author:
undertaker598
[ Edit | View ]
Date Posted: 21:11:21 10/09/12 Tue
ITEMS FOR SALE:

READY TO RUN FRESH PONTIAC 18 DEGREE FULLY PORTED AND POLISHED BIG CHIEF HEADS, WITH 2.400 TITANIUM INTAKE VALVES AND 1.900 TITANIUM EXHAUST VALVES, T AND D SHAFT ROCKERS, STANDS AND DART VALVE COVERS. SELL FOR 2500.00
CASH NO TRADES

DART 360 BIG BLOCK CHEVROLET FULLY PORTED AND POLISHED HEADS WITH 2.35 INTAKE VALVES (PLUS .3OO LONG), AND 1.88 EXHAUST VALVES, WITH 7/16 GUIDE PLATES, NO SPRINGS, JUST TITANIUM RETAINERS THESE FLOW 440, SELL FOR $1200.00.

COMPETITION CAMS 1.7 RATIO ROLLER ROCKER ARMS WITH POLY LOCKS FOR BIG BLOCK CHEVROLET $130.00 (MISSING ONE POLY LOCK)

LUNATI 4.5 STROKE BIG BLOCK CHEVROLET CRANKSHAFT WITH STANDARD BIG BLOCK CHEVROLET JOURNAL SIZE, FOR 2 PIECE SEAL STYLE BLOCK. VERY NICE CRANK SELL FOR $600.00

BIG BLOCK CHEVROLET HAMBURGERS OIL PAN. $200.00

496 BIG BLOCK CHEVROLET SHORT BLOCK, EAGLE CRANK, SCAT RODS, FORGED JE PISTONS, 2 BOLT MAIN CHEVROLET BLOCK WITH BILLET STUD GIRDLES ON MAIN CAPS FOR STRENGTH, ASSEMBLED AND READY TO GO, NEVER USED NITROUS ON THIS. SELL FOR $3000.00 CASH NO TRADES.

CALL HENRY (956) 428-RACE (7223) THANKS

Last edited by author: Wed October 10, 2012 07:08:37   Edited 3 times.
Replies:

Subject: Roller rocker arms for sale


Author:
Herman 2408355 call or text
[ Edit | View ]
Date Posted: 23:42:52 10/27/12 Sat
1.6 7/16 stud roller rocker arms $150 obo
Subject: Canfield Heads


Author:
PeteM
[ Edit | View ]
Date Posted: 08:27:01 10/22/12 Mon
Selling Canfield aluminum heads for small block. Heads have been milled to 54cc and have been extensively ported. The springs have been set up for solid roller cam and have pacaloy spring and retainers. Valves are 2.05/1.60 and has dual exhaust pattern. Standard and also 3" wide. They come with 1.6 rockers and stud girdles. Asking $750 obo. If interestedyoi can text me at 9566552291

Replies:
Subject: Mustang parts 79-93


Author:
George
[ Edit | View ]
Date Posted: 22:16:03 10/12/12 Fri
Up for sale is a couple of parts
1. A brand new set of sbf 185 AFR heads part #1388 $1500 obo
2. Brand new comp cam grind number is xe282hr 565/574 lift $250 firm
3. Rear set of 4 lug weld draglite wheels with no tires 15x8 with a 4 1/2 backspace $250obo
4. Ford racing svo tach with shift light $100 firm
5. Brand new In tank fuel pick up to use an external fuel pump with stock tank great for a carb application $80 firm
6. Bbk caster and camber plates $140 firm
Pictures upon request
I can be reached at 956-466-5611

Replies:
Subject: Ford and mustang parts for sale.


Author:
Herman 240-8355 call or text
[ Edit | View ]
Date Posted: 17:57:22 10/20/12 Sat
1969 351w bare block machined .040 over. Fresh ready for rotating assembly. $425

36# injectors and pro-m meter $250

351w shorty swap headers for fox body mustang. $150

Replies:
Subject: 377 SMALL BLOCK CHEVROLET FOR SALE REHER MORRISON


Author:
undertaker598
[ Edit | View ]
Date Posted: 15:50:12 10/20/12 Sat
Image and video hosting by TinyPic

FOR SALE 377 SMALL BLOCK CHEVROLET WITH ALUMINUM HEADS, THIS IS A REHER MORRISON MOTOR, SELLING INTAKE TO PAN FOR ONLY 3500 DOLLARS. THROW A CARB, STARTER AND DISTRIBUTOR ON IT YOU ARE READY TO RUN. CALL (956) 245-7771 IF INTERESTED. PLEASE NO TIRE KICKERS SERIOUS INQUIRES ONLY. BRING CASH IN HAND NO TRADES.
THANKS, HENRY

Last edited by author: Sat October 20, 2012 16:01:26   Edited 2 times.
Replies:

Subject: mustang parts


Author:
Lupe(ExileSS)
[ Edit | View ]
Date Posted: 23:04:43 10/21/12 Sun
looking for mustang parts power steering pump with pulley, and the both lines . and possible the power steering bracket for a 351W but to use a 302 power steering pump

text me 956 975 8419
Subject: For Sale


Author:
PeteM
[ Edit | View ]
Date Posted: 18:30:16 10/17/12 Wed
Selling brand new Ford Motorsport driveshaft for fox body mustang $275 obo. I also have a new summit brand aluminum radiator for fox body $250 obo. If interested give me a call or text 956-655-2291

Replies:
Subject: Need a racing seat!! Let me know what you have. I'm going to order one today by 8:00pm unless I can find something local.


Author:
Kent
[ Edit | View ]
Date Posted: 15:10:05 10/21/12 Sun

Replies:
Subject: loking for stage 2 cam and springs for 2001 mustang gt let me know 9709275


Author:
jim
[ Edit | View ]
Date Posted: 13:36:29 10/20/12 Sat
Subject: Buy and sel vehicles (NC10041)


Author:
shaun
[ Edit | View ]
Date Posted: 05:18:10 10/20/12 Sat
Buy and sell your used cars, bike, trucks, evry type pf vehicle in UK with Good price. (http://www.autotrader.co.uk/)
Subject: centerlines auto drags


Author:
Lupe(ExileSS)
[ Edit | View ]
Date Posted: 22:37:19 10/19/12 Fri
looking for pair of centerlines auto drags wheels for a GM car bolt pattern (trans am, camero, monte carlo ss )looking for somthing with a 15x7 to 15x10

text and if possible pix

956 975 8419
Subject: Weslaco City Lot


Author:
Javi
[ Edit | View ]
Date Posted: 14:58:33 10/18/12 Thu
I'm selling a Weslaco city lot that I have it's 56x140 in a quiet new neighborhood it's 56x140 great investment asking for 20k its down PlesentView and Largo street last empty lot on your Right hand side text if intrested (956)246-6628
Subject: Buy and sell vehicles (NC10041)


Author:
shaun
[ Edit | View ]
Date Posted: 12:23:44 10/17/12 Wed
 buy and sell your used cars, bike, trucks, evry type pf vehicle in UK with Good price. (http://www.autotrader.co.uk/)


Subject: For Sale: fully ported pro comp 190 cc aluminum heads for sbf


Author:
Abel
[ Edit | View ]
Date Posted: 09:28:41 10/13/12 Sat
For info and pics of heads call or text me at 9562417700

Replies:
Subject: wtt


Author:
jose
[ Edit | View ]
Date Posted: 14:37:21 10/15/12 Mon
Wtt my 750 holley double pumper carb for a 670-770 street avenger
Mine is working good, still on truck
Call or text at 956-2321666
Subject: 94-95 pms


Author:
Javi
[ Edit | View ]
Date Posted: 23:49:40 10/14/12 Sun
Anderson ford PMS for 94-95 mustang
Call or text 956 329 4070
$750 obo
Subject: BFG's tires


Author:
Lupe(ExileSS)
[ Edit | View ]
Date Posted: 09:54:53 10/10/12 Wed
have a set (4) of BFG's 295/75/16's just bought from a used tire shop. that got for my parents truck but they had all ready gotten tires so i need to sell them taking up space. condition are in good condition i payed 280 asking 150 for the set

text or call 956 975 8419
can send pix

Replies:
Subject: Ford Racing Pan and pick up


Author:
Leo Salinas
[ Edit | View ]
Date Posted: 20:44:39 10/11/12 Thu
Photobucket>
Photobucket>
Photobucket>
Subject: Buy and sell vehicles (NC10051)


Author:
adeel
[ Edit | View ]
Date Posted: 15:06:31 10/11/12 Thu
Buy and sell your used cars, bike, trucks,every type pf vehicle in UK with Good price.(http://www.autotrader.co.uk/)


Subject: For Sale: 26 MT runners


Author:
Juan
[ Edit | View ]
Date Posted: 09:33:15 10/11/12 Thu
In good condition $120. Also 03-04 cobra cold air $80. Ph# 739-4836
Subject: Fox Mustang Parts Wanted


Author:
Santos
[ Edit | View ]
Date Posted: 23:35:19 10/07/12 Sun
Looking for some Ford Motorsport 24lbs injectors, A C&L masss air for the 24 lbs, and a 70mm Throttle Body with spacer. Let me know what you got thanks.

Replies:
Subject: tranns and tranfercase..


Author:
Rodrigo torres
[ Edit | View ]
Date Posted: 21:28:00 10/10/12 Wed
took this of my 1980 blazer its a 205 tranfercase with tthestanderd trans with the low gear and 1,2,3gear everything works good on it took it off cause made it into auto had no problem with it the tranfercase number is c-99404... will come with everything for standerd and the 2 driveshaft...WILL NOT PART OUT SALE TOGETHER...ASKING $400 for it u can tex me at 956-640-7372...
Photobucket
PhotobucketPhotobucket
Subject: sbc parts


Author:
luis
[ Edit | View ]
Date Posted: 13:04:45 10/10/12 Wed
selling a victor jr intake and a .560 solid cam for sbc..call or text 956-398-7375

Replies:
Subject:
"RACE S-10 FOR SALE"


Author:
Mod
[ Edit | View ]
Date Posted: 23:19:30 09/30/12 Sun

Engine: 355 Small Block Chevy on Alcohol

Transmission: 2-Speed Powerglide

Forward facing fenderwell headers

Extra Carb & Intake Included

Extra Cowl Induction Hood also included

Lots of new parts

Price: $13,000

For more info call (956)451-1403
























Replies:
Subject: 1989 Mustang LX Coupe


Author:
93SVT
[ Edit | View ]
Date Posted: 16:18:22 10/08/12 Mon
up for sale is my 89 5.0 coupe ex 4 cyl i rarely use it and i dont want it to go to waist it has up to date tags,clean tx title,RUNS&DRIVES GREAT and mods that include
-GT 40 Tubular Intake
-GT 40 Heads non p
-Crane Cams 1.6 Roller Rockers
-70mm BBK/Edlebrock Throtlte Body
-Pro M MAF/24# FRPP Injectors,PP Fuel Pressure Regulator
-Alt,water pump&crank aluminum pullys
-A/C Delete
-New 3 Row Aluminum Radiator
-E fan
-MSD Coil/FRPP Spark Plug Wires
-2 Month Old Alternator,Battery,and Starter
-BBK Shorty Headers,BBK Bolt On X Pipe,Super 44 Flows with 2' SS Tailpipes
-T5 Transmission,Spec Stage 1 Clutch,B&M Shifter,Adjustable Clutch Cable
-Full Length Subframe Connectors
-Converted to 5 Lug all aound,FR 500 Wheels,car has been aligned
-31 Spline Axles and Posi Unit,Trick Flow Diff Cover
-UPR Upper&Lower Control Arms
-Paint is a couple months old front passenger side fender on the bottom were bumper meets fender is bent somewhat can be fixed easy without repainting car is rust free
-2in Cowl Hood, Smoked Headlights 6k Hids
-inside autometer 3 gauge pod volts,oil and water gauges ,carpet and seats are in good condition,headliner and dash need some work nothing hard has a aftermarket steering wheel but can throw in OEM Steering wheel

ASKING $4600 FIRM!!!!!!!!!!!!!!!!!!!!! CAR IS WORTH IT MOST IF NOT ALL PARTS ARE NOT EVEN A COUPLE OF MONTHS OLD CAN WORK WITH PRICE WITHOUT THE FR500 WHEELS NOT IN A HURRY TO SELL,NO TIRE KICKERS OR JOY RIDES DONT WAIST MY TIME AND I WONT WAIST YOURS NOT LOOKING TO TRADE IF INTERESTED CALL 956245SIXTHREEONESIX NO CALLS AFTER 10PM THANKS

Uploaded from the Photobucket Android App


Uploaded from the Photobucket Android App





Uploaded from the Photobucket Android App

Photobucket
Subject: FOR SALE 2002 CAMARO Z28


Author:
Rene
[ Edit | View ]
Date Posted: 13:33:15 10/08/12 Mon
For sale 2002 Chevy Camaro Z28.. veryf ast car..street legal. car is tuned has gears and 4500 Yank stall.. transmission has racing gears and clutches.. car has 131k miles but has about 5000 miles on rebuild motor.. for pics or more info or pics call (956)200-3462.. asking $7000 or best offer..
Subject: draglites and slicks


Author:
ruben
[ Edit | View ]
Date Posted: 14:54:42 06/11/12 Mon
up for sale are my weld racing drglites they are 15x10 with 7.5 backspacing they have bothe bolt patterns for chevy cars and ford and mopar cars. they are offseted for c4 corvettes and 93-02 f-body camaro trans am firebird formula should also fit 94 to 04 mustangs. the slicks are 28x10.5 mickey thompson et drag slicks with about 95% percent life i want 550 for the wheels and slicks if you are interested call me or text me at 956 373-3195
http://i531.photobucket.com/albums/dd357/rolvasquez/Mobile%20Uploads/mms_picture-65.jpg
http://i531.photobucket.com/albums/dd357/rolvasquez/Mobile%20Uploads/mms_picture-64.jpg

Replies:
Subject: mustang lx hatch rust free


Author:
marco
[ Edit | View ]
Date Posted: 19:07:48 10/04/12 Thu
mustang hatch 100% rust free as never been repaired or painted,has factory color. call or txt 956-312-7141 thanks. please no calls or txt after 11pm, thank you. pics can be seen on craigslist,brownsville,tx. under autoparts. asking $140

Replies:
Subject: Misc. Ford and Chevy Parts


Author:
UnKnown
[ Edit | View ]
Date Posted: 12:59:25 10/07/12 Sun
Ford:
set of ten hole mustang rims 4lugs 15"
3.31 gears for an 8.8 rearend off of mustang gt
302 triple y short block
302 short block
460 long block
tranny dont know what it goes with
fox body lx rear bumper cover

Chevy:
two complete engines either 305 or 350
tranny with transfercase


If Interested call and make offers i have no set Price on anything just rather sell them than taking them to the scrap yard and all engines have been out doors and are rusted need to be taken apart so not expecting alot for them but not giving them away and the mustang gears have less than a thousand miles. everything ill take trades like electronics (working electronics) or since im into gunsmithing as a hobby i will take ammo or used or non working firearms or ill take knives as well. send me a text or give me a call if interested 532-9431
Subject: 84 Chevy longbed and big block Chevy parts for sale


Author:
Slammer
[ Edit | View ]
Date Posted: 11:20:11 10/07/12 Sun
84 Chevy longbed for sale $20,000.00 street legal rolling truck has ran a 5.79 best time at 122 mph. YouTube. Slammer1131. I have tons of big block Chevy parts. H beam eagle rods new. 555 coated Chevy pistons. Super comp headers for Chevy truck. 505 Chevy short block needs pistons eagle assembly. Flex plates. 454 block msd digital 6 ,converters gm Bowtie symmetrical ports heads. Titanium valves. Crane gold roller rockers. March pulley brackets for alternator and power steering pump. Pro star 15x15 rear wheels and matching skinny's 302 mustang block and other ford parts. Nitrous jets. The list goes on. Call me or text me. Brent 817-366-5641. I have some really nice stuff just need to go through it all. Thanks.
Subject: WTB: SBC Cylinder heads


Author:
Rene Jr.
[ Edit | View ]
Date Posted: 09:51:25 10/05/12 Fri
As the ad says, im looking for a good set of sbc heads ready to bolt on. Nothing fancy to run 10s just a good pair of heads. Call or text 956 7399481 or if no response call or text 956 454 7267

Replies:
Subject: TREMEC 3550 TRANSMISSION


Author:
90 LX
[ Edit | View ]
Date Posted: 15:44:15 10/06/12 Sat
NO special clutch nor drive shaft requiered, will bolt right up to Foxbody mustangs no aditional modifications. Tranny shifts like a champ!

10 spline input shaft 28 spline output

Pro 5.0 shifter & crosmember are included (pics can be seen in Mcallen Craigslist )

Asking $900.00 dlls


I can be reached at 956 463 7953. Thanks in advance
Subject:
WANTED: 5 LUG MUSTANG WHEELS


Author:
Mod
[ Edit | View ]
Date Posted: 22:35:11 08/29/12 Wed
Looking for two 5 lug Mustang wheels. Just need something I can throw my slicks on. Only thing is wheels have to be 15's.....if you have some laying around give me a call.

Mark @ 956-655-2835

Replies:
Subject: NITROUS KIT COLD FUSION (NEW)


Author:
Fred
[ Edit | View ]
Date Posted: 12:08:54 08/29/12 Wed
BRAND NEW Dry kit 50hp-100hp
$350.00

BRAND NEW Wet kit 50hp-200hp
$425.00

956-466-5119 Call or Text
9am-6pm Tues to Sat.

Replies:
Subject: trans parts


Author:
rey
[ Edit | View ]
Date Posted: 15:30:56 10/02/12 Tue
i am looking for 2 transmission brackets for a 98/up chev. camaro..the shifter cable bracket.4L60e.i believe mounts at trans. pan(not on top part of trans. housing).also the shifter lever on trans.(has the pin for push on cable)...if anyone has these parts..please call or text 956-966-0411

Replies:
Subject: Sbf Ultradyne solid roller cam


Author:
PeteM
[ Edit | View ]
Date Posted: 10:06:31 10/02/12 Tue
For sale Ultradyne solid roller used on my 351. Specs: @.050 286/294 gross valve lift 762/683 with lobe seperation of 108. Asking $225 obo if you have any questions you can text me at 9566552291
Subject: wtt/wts .45


Author:
jose
[ Edit | View ]
Date Posted: 07:41:07 09/25/12 Tue
Sale or trade GI .45 springfield 1911a1
Make offer
Looking for explorer 5.0 motor t5 tranny or performance parts tell me what u have never know
Call or text for more info 956232-1666

Replies:
Subject: Some parts for sale


Author:
Fordalex
[ Edit | View ]
Date Posted: 19:31:55 10/01/12 Mon
-63 ford galaxi grill pertty cool for decorating your man cave or if your car needs one. 60 bucks
-4 cylinder mustang t5 non wc in working condition 60 bucks
-f150 first gen lightning style mirros
30 bucks
I can send you pics if you like, for more info call 956 429 5270 alex
Subject: 1985 Chevy silverado for sale


Author:
Raul
[ Edit | View ]
Date Posted: 17:49:30 09/30/12 Sun
1985 Chevy Silverado with a 305,ac ,electric fans ,700R wit over drive completely rebuilded , New torque converter with lil stall ,power windows power locks very clean int. If intrested give me a call 956-453-0652

Replies:
Subject: 1989 ford mustang lx 5.0


Author:
Raul
[ Edit | View ]
Date Posted: 18:06:31 09/30/12 Sun
1989 ford mustang it has a 5.0 with an E-303 cam shorty headers aluminum rad. E fans 373 gears Ft -40 heads ported and polished 3 angle valve job with cobra upper and lower intake has ac works great clean int . All in mint shap also comes with drag lit wheels with runners on the front $5500 you can call or text any time 956-453-0652
Subject: billet grills for sale or trade


Author:
Raul
[ Edit | View ]
Date Posted: 17:58:53 09/30/12 Sun
I have two Chevy billet grills fit on 2010 -2012 Chevy pick up's for sale or trade let me know what you have $ 100 each call or text me at any time 956-453-0652
Subject:
"JERICHO 4-SPEED TRANSMISSION"


Author:
Mod
[ Edit | View ]
Date Posted: 19:39:49 09/25/12 Tue
Up for sale is this awesome Jericho 4-Speed Transmission. It comes complete with clutch, pressure plate assembly, scatter shield and shifter. This is NOT an overdrive transmission. It's a Jericho 4 Speed that allows you to run hiway gears in your muscle car but have the launch of a drag car with race gears.....this is a badass hi-performance transmission for your Hot Rod or Muscle Car.

Price - $3500.00

Call Alex Moreno at (956)223-0375








Replies:
Subject: Foxbody Mustang Parts For Sale


Author:
93SVT
[ Edit | View ]
Date Posted: 23:54:01 09/18/12 Tue
USED MSD 6AL IGNITION BOX in MINT CONDITION(came off running car) $100

NEW FRPP 31 SPLINE YOKE fits TREMEC T45,3650,T56 & TKO 500/600(still in the box) $60

NEW HOLCOMB MOTORSPORTS SBF ALUMINUM VALVE COVERS W/BOLTS&WASHERS(still in box) $100

USED TREMEC 3650 B&M RIPPER SHIFTER $40

1 NEW 1 USED LAKEWOOD 90/10 STRUTS(sold as pair used strut is in working order) $100

if interested call/txt 9562456316 NO CALLS/TXT AFTER 10PM
ALL PRICES ARE FIRM NO TRADES THANKS

Replies:
Subject: Race Parts-Garage Clean out


Author:
Rob Russell
[ Edit | View ]
Date Posted: 22:02:52 09/23/12 Sun
I have a bunch of parts to sell:

Comp Cams BBC Solid Roller 310-RXD-14 277/292 .800Int/.800 Exh 114 Lobe separation 4/7 swap cam-idle time only-$300

Strange Aluminum 3rd Member-3.062 Bearing-$325

Moser Aluminum pinion Support-35 Spline Pinion-$100

Strange 33 spline spool-$150

Pro Hood Scoop-$150

Hurst Quarter Stick-shifter only, missing spring for reverse lock-$75

Monza/Vega Fiberglass Rear Wheel Openings-$75

Moroso Water Pump Drive-$50

BTE 6 foot transmission cooler line kit 1/8 NPT to 6 AN- $35

Hurst Electric Solenoid Shifter-Powerglide-$120

Holley 1250 Dominator-barely used-$750

Applied Racing Billet Aluminum CO2 Bottle(2.5lb) Bracket- $35

Applied Racing Billet Aluminum Bracket for above bracket to 1 5/8 tube- $35

Throttle pedal for tube chassis car with quick pin- $30

Jegster track rod kit 550-40004 for ladder bar or 4 link with brackets, rod ends, tube-$60

Ed Quay Chevy Monza aluminum wing-never installed $175

TPI Runners for IROC Camaro 350 Chevy-$50

Drag Shocks-Front-Adjustable 90/10, 80/20, 60/40 shocks for 69 Camaro-Used-$50

Quick Release Steering Hub-hub only no tubing hex end-$20

Applied Racing Engine Limiters-plate bolts to motor mount pad and tabs on frame-for use with front motor plate cars. I have 2 of them. $25 each.

Applied Racing Billet aluminum brake pushrod-$15

Superflow(now Magnafuel) 4 port fuel pressure Regulator-never used-$150

Accel Super Coil Part#140001-used-$30

Accel Super Coil for Chevy V8-HEI in cap Part#140003-used-$35

Mr. Gasket Carb StubStack (like K&N)-$20

Wilwood Rear Drag Brake Kit for Ford 9”-New Style Big Ford Ends-Used-No pads $375

Call Rob at 210-378-2001. All prices do not include shipping.
Subject: 99 custom 2 door tahoe for sale


Author:
erick
[ Edit | View ]
Date Posted: 10:55:36 09/22/12 Sat
if any anybody is interested he is thinking about selling it.. this is what he sent me on it..
1999 CHEVROLET TAHOE 2 DOOR 2 WHEEL DRIVE, LAZER STRAIGHT BLACK PAINT, LEATHER 2 TONE INTERIOR CUSTOM, BILLET SPECIALTIES POLISHED 17" WHEELS, HI-PERFORMANCE RADIAL TIRES, REBUILT TRANSMISSION, REBUILT DIFFERENTIAL 3.73s, COWL INDUCTION HOOD, SS 454 BLACK GRILL, STEEL ROLL PAN REAR, CUSTOM TAIL LIGHTS, DUAL EXHAUST WITH 4 NEW 0/2 SENSORS, AM-FM-CD RADIO, TILT WHEEL LEATHER WRAPPED, NEW CARPET AND MATS, DRIVER ELECTRIC SEATS, ALL NEW EXTERIOR GLASS, REBUILT BRAKES, NEW A/C COMPRESSOR, LOWERED 2" FRONT 4" REAR, NEW HEADLIGHTS, NEW TURN SIGNALS. NEW INSPECTION STICKER, VIRGINIA CLEAR TITLE, 3RD OWNER CLEAN CAR FAX, THIS TAHOE IS A GREAT ONE RARE 2 DOOR EVEN HAVE THE ORIGINAL WINDOW STICKER, NO RUST PERFECT BODY, ALSO NEW TUNE UP COMPLETE PLUS GOOD GAS MILAGE WITH THE VORTEC 5.7 V/8. ALSO HAS ESCALADE CENTER CONSOLE WITH POWERED SUBWOOFER AND ALL SPEAKERS HAVE BEEN REPLACED WITH BOSE .
$12,000.00.

TO SEE PICS COPY AND PASTE URL

http://i575.photobucket.com/albums/ss195/erickvazquezmustang/58379_451069081602631_1880375482_n-1_zps0910df54.jpg

http://i575.photobucket.com/albums/ss195/erickvazquezmustang/486865_451058028270403_1297033257_n_zps5fd324f6.jpg

http://i575.photobucket.com/albums/ss195/erickvazquezmustang/301378_451057681603771_249342800_n_zps2c4a5a5f.jpg

[/COLOR]interior pics will be up later today
Subject: MSD distributor and wires


Author:
Guy
[ Edit | View ]
Date Posted: 22:21:29 09/20/12 Thu
I have a new MSD distributor and wires for Dodge.
asking $200 for distributor and wires.
call or text 956-867-1392
Subject: 2008 G8 GT FOR SALE


Author:
MARIO
[ Edit | View ]
Date Posted: 13:14:24 09/19/12 Wed
2008 G8 GT
6.0L V8
EXERIOR: WHITE
INTERIOR: BLACK LEATHER
60K MILES
BEAUTIFUL CAR!
CALL 956 6006716 FOR MORE INFO
TEXT OR EMAIL FOR PICTURES
ASKING $21,000
PRICE IS NEGOTIABLE!!!!
Subject: WTB a set of pi heads 2000-04 mustang heads


Author:
Luis Espinosa
[ Edit | View ]
Date Posted: 18:50:42 09/17/12 Mon
Pi. Heads
Subject: cleaning storage


Author:
Lupe(ExileSS)
[ Edit | View ]
Date Posted: 11:59:38 09/17/12 Mon
got a stock 350 4 bolt main standard bore , standard main and rods never been cut. dose need work rod bearing worn, mains ok crank in good shape. rods in good shape. dose have cam for sure its stock. its a complete short block

150 obo

pair nitro glass packs 3 inch in/out 12 inch long just like the dynomax bullets there 3 weeks old

$40 for the pair

pair of centerline auto drags 15x10's with 4.5 back spacing dual pattern with fit chevy cars and ford mustang . no tires no center caps. in good shape.

$200 obo

956 975 8419 text or call , can send pix
Subject: 28in slicks


Author:
TXRED
[ Edit | View ]
Date Posted: 23:17:27 09/16/12 Sun
got some 28x10.5W 15 for sale less than 10 passes $250

text me 605-5850
Subject: for sale or trade


Author:
jose
[ Edit | View ]
Date Posted: 22:28:21 09/10/12 Mon
I have a 03 5.3 stock $500 or $700 with ac comp,alt. New starter,coils,power streering pump,manifolds
Gmpp carb intake new $350
10" gm35 hughes stall $350
97 gt doors $50 both hood $40
89 dashboard $50 ,quater windows $50 both,comp cam flat tap 302 230dur/512 lift
Call or text at 956-232-1666
Im looking for aftermarket sbf heads ,cam,intake,t5 tranny,headers or tell me what u have

Replies:
Subject: Foxbody 87-88 computer n harness


Author:
Lorenzo
[ Edit | View ]
Date Posted: 10:45:47 09/11/12 Tue
Looking for a speed density wire harness and the computer if u have one give me a call 956-536-2184

Replies:
Subject: Auto Meter (2 1/16 inch) Boost Gauge (Model- Ultra Lite) $30 for pickup only in edinburg of exit 107 from 281 no city driving if coming far. Call 929-9038 Also, selling some brand new MT ET streets 26/10.5/15 make offer. Thanks


Author:
Daniel G.
[ Edit | View ]
Date Posted: 20:22:32 09/11/12 Tue

Replies:
Subject: Ford parts $$$


Author:
Herman
[ Edit | View ]
Date Posted: 01:19:47 09/11/12 Tue
GT40 or cobra nos plate with cheater solenoids $150
351w shorty headers in a mustang $100
39# cobra injectors $100
Scorpion Rocker arms 1.6 $150
36# injecters with pro-m meter $200
Nos bottle brackets $20

Text 956-2-4-0-83-55
Subject: bbc 454,th400,np205


Author:
jr
[ Edit | View ]
Date Posted: 01:00:22 09/10/12 Mon
bbc 454 recently removed from 89 Chevy 3500 was running smooth and strong when pulled engine is mostly complete no tbi stuff on it including dist has cast aluminum valve covers and new exh manifolds

th400 from same truck was shifting great when pulled has no tail shaft tho converter goes with it

np205 transfer case has 32 spline female input shaft

i am selling the 454 tbi setup also complete tbi unit, ecm, harness and distributor

also a th400 to np205 adapter

Replies:
Subject: diecast cars


Author:
pete pozos
[ Edit | View ]
Date Posted: 23:06:28 09/05/12 Wed
i'am looking to hook up with fellow diecast car owners and possibly form a club for show or trade shows.i currently have a collection of drag racing fuuny cars and dragsters.looking to trade or buy more pieces for my collection.1/64,1/24/1/16 scales and any drag racing paraphenelia.

Replies:
Subject: Weld wheels draglites, 15x8 4.5 back space with 26x10 hossier slicks for sale. Slicks have a few runs left.


Author:
Luis
[ Edit | View ]
Date Posted: 22:51:26 04/27/12 Fri
slicks have a few runs left on them. comes with new hoosier drag tubes. Weld draglites 15x8 five lug universal 4.5 backspace. asking $350.00 obo call or text (956) 639-7592

Replies:
Subject: for sale or trade project mud truck


Author:
ben
[ Edit | View ]
Date Posted: 17:10:10 08/22/12 Wed
up for sale or trade is a project mud truck asking 1700obo.This is a roller has 38's in the front and 39.5 boggers in the rear, 411 gears in the front and 456 gears in the back does come with hood has a np205 transfer case and a th350 transmission bolted up to it truck has no title cause body lays on a newer chassis if you have any questions call (956)244-7310 ask for ben





Replies:
Subject: 01 mustang GT with Cobra body kit


Author:
Javi
[ Edit | View ]
Date Posted: 22:15:45 09/02/12 Sun
Selling my 01 mustang GT with cobra body kit. Has 18in Saleen wheels bone stock with black leather interior with auto transmission can send piks upon request 5,500 text me at (956)246-6628

Replies:
Subject: 1969 camaro LS-2 EFI pro street


Author:
diesel doctor
[ Edit | View ]
Date Posted: 09:05:04 09/06/12 Thu
1969 chevy camaro ,Pro Street all metal car.except hood,all new , 500+hp Ls-2 built engine less than 50 miles,built 4l65 tranny.presion 4000 stall multi disc,no expense was spared on drive train build,dana 60 rear end,35 spline axle,ladder bars,coil over,whellie bars,12 point roll cage,with swing outs on both sides,weld wheels,mickey thompson pro street tires/with tubes,super light weight car 3150 with out driver,fuel cell in trunk,optima battery in trunk,msd efi fuel pump,all steel braded hoses,tranny cooler with fan,high performance radiador/w electric fans all controlled by ecm,custom wire harness,with 2006 denali cluster working,b&m shifter,borla exhaust,dual 3 inch,hooker custom ceramaic headers,dirty dingo motor mounts sliders,custom built tranny mount,too much to list please no scamers or dreamers,25,000 , only trade 2008 or newer corvette ot travel trailer , have over 45k invested, CLEAN TEXAS TITTLE ON HAND,if intrested call me at 9-5 six-two- one -2-two 4 seven 8 ----sorry for phone number being like this Dam scamers also will not reply to email, need to text me or call me, will deliver car @1.25 per mile have also in craiglists with all pics at
http://dallas.craigslist.org/dal/cto/3249268663.html car is located in mission,texas
Subject: Snap on Tool box for sale!


Author:
MARIO D.
[ Edit | View ]
Date Posted: 12:45:57 09/04/12 Tue
selling my snap on 11 drawer tool box paid $4800 for it. im asking $3500 OBO . dont want to sell because its a beautiful tool box but i need the money to pay for my schooling. ive only had sonce this last christmas so its still new took really good care of it.
the color is black.
you can reach me at 9566006716 call text email it doesnt matter. my name is Mario. top of the line toolbox!!
Subject: 1971 Vega 468 BBC


Author:
ACE
[ Edit | View ]
Date Posted: 18:53:20 09/02/12 Sun
71 Vega w 468 BBC, Power Glide, Tube Chas, New Front Aerospace Comp. Spindles/Brakes, New Hoosier Rear Tires w/Tubes & New 1050 Dominator.. Call ot Text 956-222-3917.. $9,500.....or Possible Trade....
Subject: Wtb: chevy el camino ( 1980 or newer)


Author:
Ezequiel Tijerina
[ Edit | View ]
Date Posted: 18:12:15 09/02/12 Sun
Looking for a chevy el camino rolling chassis a in good condition ! If you are selling one plz call me or send me a msg with pic , thanks. (956) 334-0125
Subject: WTB engine stand


Author:
Leo
[ Edit | View ]
Date Posted: 13:15:21 09/02/12 Sun
I am looking for an engine stand if anybody has one laying around and not going to use.. I know they are 50 bucks at harbor freight ,but just checking if you have one and willing to get rid of ...

please e-mail me what you got and how much or post up Thanks

lsbcvs@yahoo.com
Subject: mustang parts for sale


Author:
Aaron
[ Edit | View ]
Date Posted: 17:43:10 09/01/12 Sat
hi, im selling a lx front end, looking for 60 dllrs obo, its in good conditions, as well i have 89-93 hatchback quarter windows for 50 dlrs for both, also i have a pair of coupe quarter widnows as well for 60 dllrs, lmk if your intertested in something thank you...for a faster response txt me to 240-7787 or email me to the link on the side, thank you.
Subject: WTB 460 BB


Author:
Roman
[ Edit | View ]
Date Posted: 19:55:01 08/20/12 Mon
im looking for a 460 bb ford

Replies:
Subject: Selling my 85 mustang gt t top


Author:
Jr
[ Edit | View ]
Date Posted: 11:02:51 08/31/12 Fri
Selling my 85 mustang it is in running conditions I just put a new stage 2 cam from trick flow it is standard all gears work fine no grinding it is also carburated I'm asking 1600 for it but the only bad thing here is that I would need to take of the carb after sold cuz its not mine if interested give me a call or text 9565455149
Subject: Nitro bullet glass packs


Author:
Lupe(ExileSS)
[ Edit | View ]
Date Posted: 23:11:09 08/28/12 Tue
got a pair (2) Nitro bullet glass pack mufflers they are 2 weeks old mesurements are 3inch inlet/outlet 12inch long they are just like the dynomax bullet mufflers same exhaust tone

do have pic's to send if you want to see

$40 for the pair

text 956 975 8419
Subject: 4.6 block


Author:
ivan
[ Edit | View ]
Date Posted: 10:45:15 08/28/12 Tue
I'm looking for a 4.6 block that works, I spun a bearing so I need it asap 9565250773
Subject: Want to trade oil pan and accesories


Author:
Leo
[ Edit | View ]
Date Posted: 20:23:09 08/27/12 Mon
I have a ford racing oil pan ( rear) and I want to trade it for a front sump pan ( moroso or Canton) my pan is new and installed on my long block rightnow ,but I need a front sump to make it fit my 67 mustang..

Let me know what you got..

I think we need to swap the pickup also and it must have tray..
Here is a picture of what pan I have and the one I need..
Photobucket

Photobucket

Replies:
Subject: windsor parts


Author:
93gt
[ Edit | View ]
Date Posted: 22:37:39 07/23/12 Mon
351w Vic Jr carb intake $175

MSD 8584 $150 (351w)

Trickflow Stage 1 cam $100

GT40 heads (non P) with 1.7 Cobra pedestal RR, Crane Cam springs $450

Explorer Intake upper and lower $150






70mm throttle body $100



73mm C&L housing with 30lbs inj example tube $100





O.B.O thanks

Replies:
Subject: 87-93 mustang


Author:
Bruno
[ Edit | View ]
Date Posted: 17:21:09 08/24/12 Fri
Looking for a stock or aftermarket tranny for my mustang mine broke 536-2184

Replies:
Subject: 87-93 mustang


Author:
Bruno
[ Edit | View ]
Date Posted: 17:22:10 08/24/12 Fri
Looking for a stock or aftermarket tranny for my mustang mine broke 536-2184 "standard"
Subject: crane cams 1.7 roller rockers


Author:
marco
[ Edit | View ]
Date Posted: 15:21:37 08/17/12 Fri
1.7 pedestal crane cams roller rockers for ford 302/351. in great condition, i have them stored in oil. call or txt 956-312-7141 please no calls or txt after 11pm, thanks. asking price is $160 O.B.O. pics can be seen at cragslist, brownsville,tx. autoparts.

Replies:
Subject: mustang axles & gear kit


Author:
marco
[ Edit | View ]
Date Posted: 17:29:37 08/16/12 Thu
4 lug 31 spline axles & 31 spline gear kit for mustang. axles are in great condition & spider gears are new. pics can b seen on cragslist under brownsville,tx. autoparts. call or txt 956-312-7141 please no calls or txt after 11pm, thanks. asking $275 O.B.O.

Replies:
Subject: sbc. victor jr, for sale $ 80 bucks


Author:
ronnie rodriguez
[ Edit | View ]
Date Posted: 13:03:25 08/14/12 Tue
sbc victor jr for sale $80 bucks

Replies:
Subject: 92 mustang coupe body/ carbed 5.3 motor


Author:
jose
[ Edit | View ]
Date Posted: 15:05:37 08/23/12 Thu
Lm7 5.3 64*** miles ac compresor,pwrpump,alt. New starter coil packs
Water pump $700 for all
Gmpp new carb intake $300
670 holley street avenger $300
10" 3500 stall for th350/400 $350
92 foxbody coupe $1500
Has 5.3 in it but will sale together or seperate
956-2321666
Make offer
Subject: for sale or trade


Author:
jose
[ Edit | View ]
Date Posted: 14:54:01 08/23/12 Thu
Sale/trade 92 mustang coupe (body)
Has 5lug with 373s posi was a 4 banger
kmember has been cut and welded for a ls motor
Ac deleted
Rust free but need paint
Asking $1500
956-2321666
[ Archives: 1, [2], 3, 4 ]
[ Contact Forum Admin ]

Forum timezone: GMT-6
VF Version: 2.94, ConfDB:
Before posting please read our privacy policy.
VoyForums(tm) is a Free Service from Voyager Info-Systems.
Copyright © 1998-2012 Voyager Info-Systems. All Rights Reserved.