VoyForums
[ Show ]
Support VoyForums
[ Shrink ]
VoyForums Announcement: Programming and providing support for this service has been a labor of love since 1997. We are one of the few services online who values our users' privacy, and have never sold your information. We have even fought hard to defend your privacy in legal cases; however, we've done it with almost no financial support -- paying out of pocket to continue providing the service. Due to the issues imposed on us by advertisers, we also stopped hosting most ads on the forums many years ago. We hope you appreciate our efforts.

Show your support by donating any amount. (Note: We are still technically a for-profit company, so your contribution is not tax-deductible.) PayPal Acct: Feedback:

Donate to VoyForums (PayPal):

Wed, April 24 2024, 20:43 [ Login ] [ Contact Forum Admin ] [ Main index ] [ Post a new message ] [ Search | Check update time | Archives: [1], 2, 3, 4, 5, 6, 7, 8, 9 ]

[ Next Thread | Previous Thread | Next Message | Previous Message ]

Date Posted: - Sunday - 04/22/12 - 8:59am
Author: Doug Wilson
Subject: Ice box
In reply to: BRIAN RITCHIE 's message, "ICE BOX" on - Saturday - 04/21/12 - 10:21pm

Mine is in the left, forward corner.
I only use it for dry storage, poor insulation.
I put an Engel 12v/110v cooler on the boat. Small but works well.

[ Next Thread | Previous Thread | Next Message | Previous Message ]

Replies:

[> Refer. -- Bruce (M31#95), - Monday - 04/23/12 - 1:40pm

I installed additional 2" rigid insulation board on entire interior of ice box, fiberglass-ed over and painted with white LPU paint. I thin installed an icebox conversion kit http://www.wmjmarine.com/nor-scqt4407.html, which works great. I have twin solar panels mounted on the stern pulpit which provide enough juice to power the compressor. With the added insulation, the compressor only runs about 1/4 of the time.I also added two drains - one in the galley refer, and one in the cockpit refer. I used 1" drains with hoses, and tied the two drain hoses together, then discharged into the bilge. I have dual bilge pumps, one for backup with the float switch set higher than the primary. Feel free to email me if you want pictures.


[ Edit | View ]

[> [> Ice Box Conversion -- Brian, - Tuesday - 04/24/12 - 2:01pm

Hi,

That sounds good about the ice box conversion. On the 2" rigid insulation board, where did you get it? Is there a specific type or brand? Was it expensive? What would you think about doubling it on the engine side? How hard was it to fiberglass?

Thanks,

Brian Gran Mariner 1973 M36 #9


[ Edit | View ]

[> [> [> Rigid Insulation -- Bruce, - Wednesday - 05/23/12 - 1:03pm

Hey Brian,
Sorry, I have been on Holiday in Portugal. I bought 2" thisck Styrofoam rigid insulation from Home Depot. No particular brand name. I simple used a hand saw to cut and shape it. I used Sikka-flex marine sealant to glue it to the stainless steel. It was inexpensive and easy to work with. I used TAP Plastics x-mat fiberglass roving cloth and West Systems Epoxy to glass in the foam, and after the epoxy kicked, I used west Systems Fairing powder mixed in the epoxy, and after sanding smooth, I painted everything with Perfection LPU epoxy primer and topcoat paint. I also installed new 1-1/4" drain fittings for both galley and cockpit coolers. Let me know if you want pictures. It is an easy installation (but somewhat tedious due to the various steps)
Ciao!


[ Edit | View ]


[ Contact Forum Admin ]

Forum timezone: GMT-5
VF Version: 3.00b, ConfDB:
Before posting please read our privacy policy.
VoyForums(tm) is a Free Service from Voyager Info-Systems.
Copyright © 1998-2019 Voyager Info-Systems. All Rights Reserved.