BENCH SEAT RACIN CLASSIFIED BOARD
WELCOME TO
FEEL FREE TO POST YOUR CARS & PARTS HERE
YOU ARE VISTOR NUMBER
"HOTBOX" of
the WEEK"
[Ladies Only]"HOTROD" of the Week"[Ladies Only]
For Sale.. -- ”BSR”, 17:39:35 05/22/12 Tue
ATI turbo 400,reverse valve body....$500
10" torque converter 3500 stall,anti-balloon plates,not sure what brand....$175
410-588-6230[leave message]
benchseatracin@comcast.net
[ Post a Reply to this Message ][ Edit | View ]
WELD WHEELS W/ M/T DRAG RADIALS -- LEE, 19:32:48 05/15/12 Tue
HAVE A PAIR OF WELD DRAGLITES 15X8 4.5 BS W/ M/T DRAG RADIALS NICE SHAPE 550.00 LEE 443-756-4518
[ Post a Reply to this Message ][ Edit | View ]
K&N intake for sale -- Keith, 14:25:18 05/13/12 Sun
I have a K&N Cold Air Intake off of a 2010 v6 Camaro like new. was on car for less than 2ooo miles before car was traded in.Cost over $250.00 new sell for $150.00 443-695-3860
[ Post a Reply to this Message ][ Edit | View ]
Have a pair of M/T ET Slicks 29.5x10.5 stiff sidewall.Have 8 passes on them.175. -- DougA. 443 253 8930, 14:50:43 05/11/12 Fri
[ Post a Reply to this Message ][ Edit | View ]
NEW Mickey Thompson 26/4.50/15 brand new,never mounted or ran.......$200 -- Jesse 717-676-3032, 10:12:50 05/09/12 Wed
[ Post a Reply to this Message ][ Edit | View ]
Replies:
-- Robbie 301-697-8145, 09:55:08 05/09/12 Wed
1984 monte carlo ss new cowl steel hood / 350 turbo with
3300 stall very fresh/ new guages and tach/new intake and
failry new carb/ new itres and wheels lot new pars told be
355 mtr clean solid car friend mine built it askin 3700
obo c or cash and a trade throw me cash offer need to
move it or cash and trade ins
Robbie 301-697-8145
tonyarobbie@atlanticbb.net
[ Post a Reply to this Message ][ Edit | View ]
Replies:
454 motor -- john, 16:14:44 05/06/12 Sun
i have a fresh 454 /3o over & 400 turbo intake to oil pan in car can hear run 4500.00
[ Post a Reply to this Message ][ Edit | View ]
Replies:
2003 HD 1200c Sportster. 3,650 miles V&H pipes,Screamin Eagle cams,Stage 1 kit. Garage kept. Great for cruisin' $5,800. pics available. dnl32000@comcast.net -- Dan, 09:25:17 05/05/12 Sat
[ Post a Reply to this Message ][ Edit | View ]
30 FT ENCLOSED TRAILER -- Keith, 11:54:35 05/01/12 Tue
I have a U.S Cargo 30ft enclosed trailer for sale. trailer is white with one side door on the right side. Beavertail for easy loading. complete floor is aluminum diamond plate and has top cabinets, also has electric tongue jack. $5.500.00 OBO You can contact me @ 443-695=3860 Keith
[ Post a Reply to this Message ][ Edit | View ]
Replies:
brodix/pontiac/sbc heads w/intake -- steve, 10:17:22 04/28/12 Sat
brodix/pontiac/sbc heads w/intake
heads pontiac#10093867 sbc made by brodix for gm/nascar
intake gm#10051103 raised runner
heads are complete w/manley severe duty valves,springs,
retainers,locks mild porting etc...NEVER USED....
intake untouched nib......
$1600obo
302-five four four-2094
[ Post a Reply to this Message ][ Edit | View ]
1968 camaro factory floor shift stick car nice trunk pan,rear frame rails ,orignal fenders, an d ss hood,nice rear tail panel ,rocker in and out solid doors 1/4 are good / need ds flor patch but have new patch for it car is roller clear title lower va car/ -- 5,900 obo or cash and a trade show all cash offers or cash and trade in 301 697 8145 robbie or email me tonyarobbie@atlanticbb.net, 22:04:54 04/20/12 Fri
[ Post a Reply to this Message ][ Edit | View ]
Replies:
275 60 15 mt et street tires and tele star centerline rims both new gm pattern use roll car around 600 obo/ 15x8 weld draglites and new mt tires 28. 15 one pass that all 575 obo/15x6 gm rallye and 15x7 gm rallyes blasted and painted just rims 275 obo/ two 14 et gm wheels torgue thrust 100.00 -- 12 bolt posi rear out buick with trailing arms 350 obo robbie tonyarobbie@atlanticbb.net other parts comin and car bought some shops out let me know what u need, 22:33:54 04/12/12 Thu
[ Post a Reply to this Message ][ Edit | View ]
Replies:
bbc chevy tunnel ram with carb old school 400.00 sbc tunel ram complete carb linkage work good 375.00 12 bolt 69 camaro rear complete 1,100 firm super t10 trans 500.00/ 15x 3 /13 centerline with tires new rims but been sittin 225 obo/ alum sbc heads 205 valves 800.00 obo/12 bolt rear out 66 chevelle strange axle 488 gears 1000 obo/ -- another 55 chevy hardtop roller implala bucket seats in primer orignal frame 7,500 obo/ robbie 301 697 8145, 21:43:24 04/10/12 Tue
[ Post a Reply to this Message ][ Edit | View ]
Replies:
robbie give me a call -- jason 410 808 6761, 22:44:45 04/04/12 Wed
[ Post a Reply to this Message ][ Edit | View ]
Replies:
Hurst Quarter Stick turbo 350 Holley 750 dp #4779 -- Kevin 443 693 3743, 11:09:42 04/03/12 Tue
Hurst Quarter stick for turco 350 in good condition with cable $100 obo
Holley 750dp #4779 good shape need rebuild from sitting $75
Thanks Kevin 443 693 3743
[ Post a Reply to this Message ][ Edit | View ]
If anyone is looking for a stock front clip for a 62-65 Chevy II let me know. I have one that is 5 lug in pretty good shape. Will sell for $100. includes core support and steering box. -- LS1Nova, 21:15:03 04/01/12 Sun
[ Post a Reply to this Message ][ Edit | View ]
cowl hood bolt on 87 to 93 mustang 190 obo/ new s10 shorty header 100 obo new v8 frame and mtr mnts 90 obo poly bushing/ 373 s10 complete rear 175 obo/ weld draglites 3 1/2 and 15x8 all with tires and lug nuts 650 obo/ -- crome blow proof and sheild chevy 250 obo/ crome ladders bars 90 obo tonyarobbie@atlanticbb.net or 301 697 8145 robbie anytime, 22:28:28 03/27/12 Tue
[ Post a Reply to this Message ][ Edit | View ]
Replies:
CASH FOR CORES ALT, STARTERS. CAT CONVERTERS -- J. JAMISON, 21:10:28 03/27/12 Tue
I will pay cash for used auto parts . alternators,starters radiators alum wheels ,auto trans ,any motor CATALYTIC COVERTERS ARE PAYING VERY WELL RIGHT NOW! I WILL BEAT ANY ONE'S PRICE iwll buy all cores . batteries call for prices and pick up. call jerry 443-693-2488
[ Post a Reply to this Message ][ Edit | View ]
99 ford OE cobra hood (Red) $100.00 If interested please call 443-567-3730 -- LS, 22:38:59 03/23/12 Fri
[ Post a Reply to this Message ][ Edit | View ]
69 camaro fe parts: Complete used tie rod to tie rod end with Manual steering box, both lower control arms (Need bushings-Ball joints good) both upper control arm (These are powder coated black and ball joints and bushings are good) $200.00 OBO Also have a set of offset shafts with bushings $80.00 OBO -- LS, 20:42:34 03/23/12 Fri
[ Post a Reply to this Message ][ Edit | View ]
Replies:
69 CAMARO -- 13,800, 19:37:29 03/19/12 Mon
ROLLER, HUGGER ORANGE W/BLACK STRIPES, WHITE INTERIOR, RALLEY WHEELS,NEW EXHAUST W/FLOWMASTERS, BOTTOM OF CAR WAS CLEANED AND PAINTED BLACK.ALSO HAVE A COMPLETE FRONT END REBUILD KIT, AND USED DISC BRAKES THAT GO'S WITH
[ Post a Reply to this Message ][ Edit | View ]
Replies:
i have (2) complete frames with 12 bolt rears, that fit 69 chevelle -- $1,000 each, 17:23:58 03/18/12 Sun
.
[ Post a Reply to this Message ][ Edit | View ]
wanted good 350 turbo trans and conv with stall / and a shifter setup any size conv -- robbie 301 697 8145 or message me here thank u, 12:22:10 03/18/12 Sun
[ Post a Reply to this Message ][ Edit | View ]
Replies:
MARK U GET YOUR MAIL I SENT U -- ROBBIE, 08:04:54 03/08/12 Thu
[ Post a Reply to this Message ][ Edit | View ]
Replies:
brodix/pontiac/sbc heads w/intake -- steve, 11:23:27 03/01/12 Thu
heads pontiac#10093867 sbc made by brodix for gm/nascar
intake gm#10051103 raised runner
heads are complete w/manley severe duty valves,springs,
retainers,locks mild porting etc...NEVER USED....
intake untouched nib......
$1900obo
302-five four four-2094
[ Post a Reply to this Message ][ Edit | View ]
1995 s10 ext cab 355 mtr with 350 turbo tran shift kit 410 posi lot new parts -- 3,900 obo or cash and a trade in cash talks 301 697 8145 or email me thank u robbie clear title, 22:43:27 02/29/12 Wed
[ Post a Reply to this Message ][ Edit | View ]
Replies:
weld wheels -- rocky rothrock, 15:24:01 02/28/12 Tue
2-15x10 weld draglites $300
2-15x7 weld draglites $275
2-15x8 weld draglites new in box $325
call 410-734-7873 ask for rocky no emails thanks
[ Post a Reply to this Message ][ Edit | View ]
torque thrust wheels -- rocky rothrock, 15:20:56 02/28/12 Tue
2-15x10 torque thrust wheels. 4.5 bp $350
2 15x4 cragar ss excel cont with lugs and washers for chevy
bolt pattern but wheels are unilug. $350 call 410-734-7873
ask for rocky no emails please.thanks
[ Post a Reply to this Message ][ Edit | View ]
centerline wheels -- rocky rothrock, 15:16:23 02/28/12 Tue
centerline wheels 2 15x3.5 and 2 15x10 4.5 bp $375
centerline wheels 2-15x3.5 with 165x15 tires and
2 15x8.5 4.75 bp $400. call 410-734-7873 ask for rocky
no e-mails please.
[ Post a Reply to this Message ][ Edit | View ]
1955 chevy hardtop roller clear title decent old car from ellicot city 90 % complete car -- 5,200 obo or cash and a trade in cars,or parts 301 697 8145 or email me tonyarobbie@atlanticbb.net, 22:44:01 02/16/12 Thu
[ Post a Reply to this Message ][ Edit | View ]
Replies:
1967 camaro roller lot new parts new fenders/inner fenders/ cowl hood/ valances/ all new stainless brake lines/ new 1/4 on it stick car factory complete cars no mtr or trans clear title too much list -- 8,000 obo cash talks 301 697 8145 or email me tonyarobbie@atlanticbb.net, 21:32:23 02/16/12 Thu
[ Post a Reply to this Message ][ Edit | View ]
Replies:
12 bolt rear 488 richmonds /aubrun posi / camaro nova rear end 1,000 obo two speed glide 5,500 stall with transbrake all conan gut and conv and deep pan shiter and cables no track time just moved around garage sold car 1,500 obo or cash and a trade/ -- 301 697 8145 or email me tonayrobbie@atlanticbb.net, 23:36:25 02/08/12 Wed
[ Post a Reply to this Message ][ Edit | View ]
Replies:
jesse shoot me an email list all u need -- tonyarobbie@atlanticbb.net, 22:52:09 02/08/12 Wed
[ Post a Reply to this Message ][ Edit | View ]
Replies:
1984 monte carlo ss mild cam said be 355 new intake pbm like victor jr posi rear 373 crome cover all new polished centerlines rollcage but can be taken out bolt in full interior in car guages ,headers lot new stuff on car silver paint/ blue interior clear title racin shocks too much list -- 3,900 obo or cash and a trade in or sell less with out wheels and tires have roller put on it 301 876 3279 gary or robbie 301 697 8145 can show anytime show all trade ins or might do an even, 21:22:58 02/07/12 Tue
[ Post a Reply to this Message ][ Edit | View ]
Replies:
1963 chevy II two door hardtop rollin body has new for nine inch rear with coil overs 4 links bars all new rebuilt rearend with 411 posi 15x10 cragers new with mt tires new front fenders new front 4 inch cragers and tires new 1/4 on the car all new wheel tubbs whole trk load extra parts door ,fender extra front suspension parts all stock front 5 lug on front extra trunk lid too much to list -- car is tubbed clear title askin 5,300 obo or cash and a trade mtr,rear,wheels,int or ext parts for cars, peformance parts or sell less without wheels on car 301 697 8145 or email me tonyarobbie@atlanticbb.net, 19:16:41 02/01/12 Wed
[ Post a Reply to this Message ][ Edit | View ]
Replies:
383 stroker motor crane roller rockers /iron eagle heads /harden push rods/ sfi flywheel/ lotty goodys eagle rotaing assembly / -- windage tray /hv oil pump deep oil pan /cloyes double roller chain /total seal rings / ext balance / less 1000 miles on mtr 2,000 obo or cash and a trade in 301 697 8145 or email me tonyarobbie@atlanticbb.net, 21:15:50 01/29/12 Sun
[ Post a Reply to this Message ][ Edit | View ]
Replies:
3.5in single chamber Flowmasters. have turndowns welded on them and also a section of 3.5 pipe. theyare used and arent pretty but work 100% $75.00 for the pair. -- Mike Pyott, 09:12:12 01/24/12 Tue
[ Post a Reply to this Message ][ Edit | View ]
1962 to 1964 chevy two parts pair front fenders 60.00 pair flat hood 120 obo/ trunk lid 120.00 obo/ v8 frame nts 30.00/ complete clutch pedal setup with bar 75.00 /tublar crossmeber new 75.00/ rear 1/4 glass hardtop 35.00 pair other misc parts and 14 rallyes complete like new -- 14 inch rallyes 375 obo email me tonyarobbie@atlanticbb.net or call 301 697 8145 can meet in hagerstown area or boonsboro, 22:24:59 01/22/12 Sun
[ Post a Reply to this Message ][ Edit | View ]
Replies:
1977 camaro lt type black with red interior 8 point cage all stock int in it sunpro guages factory tach dash solid floor and frame rails car fron lower va area roller only cowl hood battery run to trunk -- clear title decent paint no mtr or trnas has crossmeber and dive shaft loop and drive shaft cragers on it 301 697 8145 or email me tonyarobbie@atlanticbb.net cash offer or cash and a trade or an even show all trade in can be mtr,rear,wheels int or ext parts , peformance parts etc, 22:03:21 01/17/12 Tue
[ Post a Reply to this Message ][ Edit | View ]
Replies:
MSD 8950 rpm activated switch. $45 -- mike pyott, 16:36:34 01/17/12 Tue
[ Post a Reply to this Message ][ Edit | View ]
Wilson NPF 10lb nitrous bottle with 6an bottle nut and racer safety fitting. $130.00 -- mike pyott, 16:34:24 01/17/12 Tue
[ Post a Reply to this Message ][ Edit | View ]
NIB Dynatech collectors and bullet mufflers -- mike pyott, 12:03:37 01/16/12 Mon
I have a pair of Dynatech #31178350835 slip on collectors still in boxes. they ae 2inch primaries to a 3.5in collector.
also 2 new mini bullet mufflers 3.5 inch in/out only 6in long
will take $140 for it all.
[ Post a Reply to this Message ][ Edit | View ]
Replies:
NO OFFENSE MEANT ! -- Ed, 01:12:30 01/16/12 Mon
MARK NO OFFENSE MEANT OR INTENDED ! I always get my panties in a wad when I am told or read of prices without a explanation of the product/labor offered. Especially when quoting a price or giving information. The truth is, most guys for whatever reason think a head that flows 340/360 is too small for them...LOL In actuality a engine that "needs" a head that flows that much would probably have a hard time running on the street. {my case exactly} I have learned my lesson more than once that the old saying " bigger is always better" has NOTHING to do with performance, reliability, and more to do with ego, and being incorrectly informed. {not that you did either} The points I was trying to make is BRODIX is a well known and respected mfgr. They designed and made these heads. They list them at the specs I had listed. Other than opinions they make an good quality product. Like all others DART, MERLIN, EDELBROCK, and even the 3rd world countries that seems to be offering thier junk we all have our preferences. You truely get what you pay for. Everything doesn't work well on a particular item just because it bolts on. BTW I did have the heads flowed as well as the combustion chambers CC'd once I recieved them. I wanted to make sure the chambers were still @ 119 after the CNC work was done. Its all right on the money @ Brodix's specs.
As far as my engine guy, well he is 70 yrs. old, his main stream of business has been Hi Perf engines for a lil over 40 yrs. He should {and does} know what he is doing. What other idiot would or could build a SBC engine, put it in a 4240 lb. truck, make sure the a/c, cruise, radio, full exhaust, etc still functions as OEM intended {no cat converters} and makes it go 8.80's on a regular basis....LOL Anyway I surely meant no offense. I do NOT know what parts you were pricing nor do I know what your labor is. I shudda just let it go, but it sounded to me like you were telling the guy the heads would cost too much to assemble. I guess after 40 yrs. with the same guy, I get treated a lil better than some. GREAT SITE and I hope it continues to be a source of info and parts !!!!
[ Post a Reply to this Message ][ Edit | View ]
Replies:
for sale 1919 t bucket 350 30 over 202 heads alum intake 600 holley totlat pefromance body and frame hust quatre shifter 15x3 weld por star and 15x15 rear all new tires new guages new int all new front drop new wiring ,rad,fuel cell lot new parts tmtl -- turnkey ready to go 10,500 might do a cash and a trade in 1 240 580 5558 or 301 759 2939 jw or call robbie 301 697 8145 can show car anytime, 22:24:23 01/15/12 Sun
[ Post a Reply to this Message ][ Edit | View ]
Replies:
Ed -- ”BSR”, 17:40:55 01/15/12 Sun
What is this suddenly a pissing match?He asked me what I thought of the heads.I wasn’t saying not to buy them or that they were a bad deal.I figured in what it may cost in the end to have a ready to run bolt on head after buying these.You are going by what a description of these heads “could” flow & a suggested cubic inch to use them on.Did you have them flowed?Did he say what cubic inch he wants to put them on?I’ve seen heads flowing more than 360 on 454’s thru 509’s,but as stated there are variables in each application.You said bare heads $1200 correct??..I'm saying after you buy valves,valve springs,retainers & locks,then get a valve job done...then depending on whether you use screw in studs with guide plates,or choose a shaft mount rocker system,how much would you have in them then?The choice of shaft mounted rockers can run up the price of buying just the rockers,but screw in studs & guide plates ad to the cost of head assembly.So Ed,how much for these heads complete ready to run? $1200 is good for these new un-used bare heads yes,are you saying my quote ready to run was too high?Glad your builder is smart.
[ Post a Reply to this Message ][ Edit | View ]
say what ? -- Ed, 23:48:09 01/11/12 Wed
Not so sure I understand what Mark said ? I mean considering the folks that make the heads suggest 509-555. Pending bore, stroke, & compression. Maybe thier flow bench is screwewd up ? Seems to me that 360 cfm out of the box is "REALLY" more than what most BBC have the ability to use. Of course if you just need to tell all your buddies that you have a set of alum heads and they flow 360 cfm that is. But when your engine runs like crap then you can blame the heads, {for being too big}. Take the time and compair flow #'s, and your particular configuration with your builder or online at just about any head mfgr. site. My guy says they are too big. Then again whats he know after 40+ yrs. of building race engines. As well as racing a 4240 lbs. steel PU truck with A/C, P/S. cruise, full exhaust and a SBC? He can't be all that talanted, smart, or expierenced. All this time I thought he knew what he was doing considering that truck runs 8.80's all day long. But what do I know. I am sure Mark is correct. Just like his estimate on valves and springs. He must have been pricing titainium valves, Jesel shaft system, and K1 springs...LOL
[ Post a Reply to this Message ][ Edit | View ]
1978 to 1981 camaro parts z28 and reg three complete cars roller or sell any part u need -- some parts fit 1970 to 1981 camaros doors ,fenders subraframe rear int ext too much list email what u need tonyarobbie@atlanticbb.net or call 301 697 8145 robbie, 20:49:27 01/07/12 Sat
[ Post a Reply to this Message ][ Edit | View ]
Replies:
hey mark -- charlie (i want to know about these heads), 04:38:27 01/03/12 Tue
BRODIX BB2-X HEADS FOR TRADE or SALE -- ED, 00:08:34 12/07/11 Wed
I have a brand new, bare, pair of BBC Brodix heads for sale $1200.00, or trade. Brodix pt# 2020003. These heads have CNC combustion chambers, CNC intake gasket matched from Brodix. Flow 360 + cfm. 119, 2.300, 1.880, 340 runners. Project changed course and these heads are too big for the new engine. Looking to sell or possibly trade for a smaller runner 312/320. NO IRON, or PRO COMPS or PREVIOUSLY DAMAGED HEADS. You can't purchase these heads ANYWHERE for less even if you can find them in stock.
edspring1@yahoo.com
[ Post a Reply to this Message ][ Edit | View ]
Replies:
70 camaro bucket seat -- has the small head rest, 16:08:35 12/28/11 Wed
$300 for the pair, or trade, diecast cars, models,etc
[ Post a Reply to this Message ][ Edit | View ]
Replies:
AUTO PARTS 69 396 short block complete 60 over 800.00 obo 69 396 shortblock all std but need sleeve 3 cyl hole 450 obo 350 4 bolt 60 over shortblock 350 obo mustang 5 spd trans with bell 325 obo good one out 91 89 t-5 parts trans with bell 75.00 both out gt cr and v8 trans 68 camaro seats been redone one time 275 obo bbc vic jr intake like new square port 145 obo/vic jr sbc intake 90 obo/pair 194 heads casting 993 all been redone new stainless valve surfaced stud springs and roller rockers 350 obo or 250 obo with out roller rockers 3500 stall conv 175.00/ super t 10 trans 600.00 obo/ -- 67/68 camaro fiberglass front tilt good shape 225 obo/69 camro ds glass fender bolt on 80 obo/ 4 spd saginal with shifter/ linkage /bell /flywheel/clutch/550 obo robbie 301 697 8145 or tonyarobbie@atlanticbb.net cash offer or cashand a trade might do even can meet half way, 00:34:05 12/24/11 Sat
[ Post a Reply to this Message ][ Edit | View ]
Replies:
DON'T FORGET TO VISIT OUR SPONSORS -- "BSR", 10:19:41 12/18/11 Sun
[ Post a Reply to this Message ][ Edit | View ]
1993 foxbody gt mustang hatchback 302 5 speed with kn filter kit and intake /clutch master clutch/headers/all new flomaster exhaust/aftermarket stereo system/ 16 pony wheels/posi richmond por gears/ harwood cowl hood bolt on solid floor and frame rails runs good -- 2,300 firm or cash and a trade clear title 301 697 8145 or email me i send pics tonyarobbie@atlanticb.net, 23:14:39 12/13/11 Tue
[ Post a Reply to this Message ][ Edit | View ]
Replies:
(NT) -- Mustang GT, 14:34:06 01/04/12 Wed
- show me a cash offer or cash and a trade (NT) -- car parts,wheels,rear,trans mtr parts, back half setup,int or ext aprts for cars /parts car /, 23:59:10 01/06/12 Fri
- 2,300 obo 0r cash and a trade in parts,parts cars, tools,, (NT) -- intakes,rears,wheels,pistons,mtr parts of any, axles, int buckets or bench seta for car show me what u got or cash offer or an even trade, 08:45:59 01/14/12 Sat
- sold (NT) -- sold, 12:16:25 01/16/12 Mon
chevy monza parts fiberglass cowl hood /v8 mnt/ v8 oil pan /super comp headers/shifter and 4 spd bell and trans/ lot other misc parts sell all or separte /5.0 mustang 5 spd trans and v8 bell out gt also an extra bell and parts trans 425 obo for all or separte/ 400 short block need rebuilt no crack 350 obo/1969 396 shortblock 60 over 800 obo -- email tonyarobbie@atlanticbb.net or call 301 697 8145, 23:04:14 12/13/11 Tue
[ Post a Reply to this Message ][ Edit | View ]
Replies:
parting out 1955 chevy sedan with good title and vins 575 obo 1974 nova good title and vins 150.00 obo/1965 chevy trk 150 obo got some nos and used 63 implala ss parts for sale 300 for all of it /nos 55 chevy ds fender 600.00 obo -- chevy two bucket seats 425 obo/camaro buckets seat 67 68 275 obo/ tonyarobbie@atlanticbb.net, 00:11:45 12/13/11 Tue
[ Post a Reply to this Message ][ Edit | View ]
Replies:
BRODIX BB2-X HEADS FOR TRADE or SALE -- ED, 00:08:34 12/07/11 Wed
I have a brand new, bare, pair of BBC Brodix heads for sale $1200.00, or trade. Brodix pt# 2020003. These heads have CNC combustion chambers, CNC intake gasket matched from Brodix. Flow 360 + cfm. 119, 2.300, 1.880, 340 runners. Project changed course and these heads are too big for the new engine. Looking to sell or possibly trade for a smaller runner 312/320. NO IRON, or PRO COMPS or PREVIOUSLY DAMAGED HEADS. You can't purchase these heads ANYWHERE for less even if you can find them in stock.
edspring1@yahoo.com
[ Post a Reply to this Message ][ Edit | View ]
Replies:
1984 Chevy S-10 ( Tubbed Out V-8 ) -- Tony, 18:06:11 11/29/11 Tue
$6900.00
THIS IS A 1984 CHEVY S-10 THAT HAS BEEN TUBBED OUT WITH A GM CRATE 350 V-8 SWAP. AUTOMATIC 350 TURBO WITH RATCHET SHIFTER, 9 INCH FORD REAR WITH 456 GEAR WITH LOCKER, WELD DRAG STAR WHEELS WITH NEW MICHEY THOMPSON 29X15.50X15 TIRES ON THE REAR. HEADERS WITH FLOW MASTER EXHAUST, IT HAS A VERY GOOD SOUND. HISTORIC TAGS WITH NO INSPECTION NEEDED IN THE STATE OF MARYLAND, TAG IT AND TAKE IT TO SHOWS.
443-527-9941
[ Post a Reply to this Message ][ Edit | View ]
1993 mustang 5.0 gt hatchback clear title pony wheels flowmaster exhaust system fairly new clutch and posi pro gears sun roof car gray int said to have 202 valve in heads 24 lbs inj runs good solid old car need paint -- 3800 obo or cash and trade or might do even show all 30 697 8145 or email me tonyarobbie@atlanticbb.net cash talks, 23:55:22 11/28/11 Mon
[ Post a Reply to this Message ][ Edit | View ]
Replies:
parts -- ,, 18:02:15 11/16/11 Wed
parts for sale.: 1) holley blue pump and reg new $75 2) holley volum max fuel pump used $125 3) flamming river disconect switch with push pull handle $75
4) two to chose from $20 each 5) switch panel $75 6)msd 6t used very little in street car $100 7) shift lite with pills $35 8) bg 750 gas old style $225 9) fuel cell, holley blue pump, filter,reg, and braided line from cell to reg $275 10) a pair of m/t et streets 29x12.50 low passes $150 for pair 11) ce 90/10 3way shocks front nova/ camaro $ 35 12) brand new wiring harnes for nova made by amer wire $300 13) 4 speed saginal good shape not junk $250
[ Post a Reply to this Message ][ Edit | View ]
Replies:
90 pickup extended cab,with cap 2900 obo or a trade or and trade -- Rob 301-697-8145, 07:41:49 11/15/11 Tue
tonyarobbie@atlanticbb.net
[ Post a Reply to this Message ][ Edit | View ]
Replies:
2004 carmate 44 foot three axle fifth wheel set up clear title 8500 obo or ccash and trade for a small boxer trailer or show what u have -- robbie 301 697 8145 or email me tonyarobbie@atlanticbb.net can deliver not to far if get a fair offer otherwise or fee on other, 22:14:58 11/14/11 Mon
[ Post a Reply to this Message ][ Edit | View ]
Replies:
PARTS FOR SALE new mag vertex dist with wires 350 obo/bbc vic jr intake 160 obo/2 new 15x8 draglire in boxe 325 obo/ new 16 gallon cell 140 obo/ used sbc vic jr 90 obo/400 shortblock std bore 300 firm/66 327 complete mtr need redone 350 obo/sbc two four intake carb and linkage 475 obo/ nos 55 chevy ds fender 700 obo orcash and trade or even trade/ -- robbie tonyarobbie@atlanticbb.net or 301 697 8145, 00:21:10 11/11/11 Fri
[ Post a Reply to this Message ][ Edit | View ]
Replies:
montecarlo rollin body 82 to 87 body style no mtr or trans solid body good drag car /dirty car /parts car askin 900 obo or cash and trade or even show all like to see it go to a new home -- robbie 301 697 8145 or email me tonyarobbie@atlanticbb.net, 00:16:15 11/11/11 Fri
[ Post a Reply to this Message ][ Edit | View ]
Replies:
FOR SALE 
2001 Impala inspected $4000 obo Ad here:http://baltimore.craigslist.org/cto/2687686618.html -- Adam Stelmack- 443 528 4474, 23:34:18 11/05/11 Sat
[ Post a Reply to this Message ][ Edit | View ]
WTB - Holley 600 cfm, 65-73 mustang tri-y headers, c4 trans slip yolk with 1330 joints, ford ranger driveshaft for 8.8 rear, -- Andy Day, 22:25:24 11/05/11 Sat
[ Post a Reply to this Message ][ Edit | View ]
Replies:
Holley HP150 pump wiht braided lines and regulator:$175, MSD6 box with blaster 2 coil $125 -- Brian 410-245-8490, 17:27:24 10/30/11 Sun
[ Post a Reply to this Message ][ Edit | View ]
Replies:
67 68 camaro tilt fiberglass front old scholl good shape 250 obo/406 mtr 4 bolt 30 over dish pistons roller lifters 580 hyd roller cam 037 worl product heads lottys good ys very fresh 1900 obo two four intake with carbs and linakge sbc tri y 480 obo/two speed glide with 5500 stall all conan items harden shaft 1.76 ratio come with shifter les 15 miles on it 1900 obo -- al items cash offer or cash and trade or even show all robbie 301 697 8145 or email me tonyarobbie@atlanticbb.net, 23:14:37 10/29/11 Sat
[ Post a Reply to this Message ][ Edit | View ]
Replies:
400 Turbo Trans, Manual valve body, Trans Brake, Deep aluminum pan, New clutches and seals, Just Freshened up. $ 500 obo -- Rich Halsey 443-309-7677, call or text, 12:09:55 10/24/11 Mon
[ Post a Reply to this Message ][ Edit | View ]
Replies:
68 Chevelle Parts -- Dominic, 20:28:07 10/21/11 Fri
Front and Rear Chrome Bumpers, Decent shape with Brackets 200.00 For the pair
Stock trunk lid, Very good shape 125.00
Hood latch assembly 25.00
Stock Non tilt steering column 75.00
Front inner fenders, 40.00 Each
Factory dash heater controls 25.00
Stock upper and lower front control arms with good ball joints 100.00 For the set
Front v8 coil springs 40.00
Trans crossmember 40.00
Chrome radiator cover 10.00
Brake pedal mounting bracket 10.00
Stock power steering box with steering arm 50.00
Good front and rear shocks 30.00 for all
stock washer bottle 5.00
Brake distribution block 5.00
I can send pics via text or email
Call for info
443-504-9923
[ Post a Reply to this Message ][ Edit | View ]
355 short block cast flat tops less than 3000 miles $400 -- jason 410 808 6761, 19:53:52 10/10/11 Mon
[ Post a Reply to this Message ][ Edit | View ]
Replies:
69 nova -- all new body, frame off, needs finished, 20:04:03 09/23/11 Fri
69 NOVA; this car has all new panels. was frame off,sand blasted, frame blasted painted and rebuilt reinstaled,car needs final block sanded,have all glass but winsheld,have back seat. no motor or trans. the price is $4,000 FRIM first one with cash gets it. rj ad 2321426
[ Post a Reply to this Message ][ Edit | View ]
Replies:
BILLET SPECIALTIES STREET LITE WHEELS 15x8 5on4.75 BOLT PATTERN WITH 5.5 BACKSPACE WITH MICKEY THOMPSON 26x10.0R15 S/R RADIAL TIRES BRAND NEW NEVER MOUNTED COMES WITH CAPS & LUGS $600.00 FOR THE PAIR CALL 410-916-4406 BETWEEN 9AM-9PM LEAVE MESSAGE I WILL CALL YOU BACK...WAYNE -- DEUCE WAS LOOSE, 18:10:04 09/23/11 Fri
[ Post a Reply to this Message ][ Edit | View ]
NOVA & CAMARO PARTS.....1965-1966 NOVA & 1967-1969 CAMARO CHROME HOOD HINGES *NEW* $350.00....66/67 NOVA 4spd SHIFTER CONSOLE PLATE *NEW* $75.00.....CHROME DUAL UNIVERSAL MASTER CYLINDER *NEW* $75.00 65-67 CHROME GAS CAP $20.00.....66/67 NOVA 2dr PASSENGER DOOR TOP STAINLESS MOLDING $40.00......EDELBROCK POLISHED VORTEC INTAKE *USED* $100.00..... -- DEUCE WAS LOOSE, 18:02:52 09/23/11 Fri
[ Post a Reply to this Message ][ Edit | View ]
Tranny rebuild -- ISEESLOWPEOPLE, 17:51:19 09/17/11 Sat
Need someone to recommend good transmission man need 350 turbo rebuilt...
[ Post a Reply to this Message ][ Edit | View ]
Replies:
valve covers -- clyde, 19:13:50 09/14/11 Wed
hillbillyhobart i still have the valve covers give me a call 410-882-4533 thanks
[ Post a Reply to this Message ][ Edit | View ]
Complete TPI set up (off 350 camaro comes with intake/injectors,wiring harness, eletronics, dist, ducting, Pretty much everything to make it run! $300 Also- Crossfire fuel injection system off a 305 camaro. Complete with EVERYTHING to this unique set up including the air cleaner. $200 OBO NEW GNX fender flares, will fit grand national/regal G body with hardware and weatherstripping NEW fibreglass pieces $170 -- Adam Stelmack- 443 528 4474, 20:53:35 09/07/11 Wed
[ Post a Reply to this Message ][ Edit | View ]
WTB super victor for 351w 9.5 deck height 4150 / also have victor jr for same for sale powdercoated same color as UPR suspension products for$225 -- Rob 410-877-5444, 00:05:43 09/04/11 Sun
[ Post a Reply to this Message ][ Edit | View ]
BBC parts -- Clyde, 19:04:00 08/28/11 Sun
BBC Fabricated Valve covers $45.00, BBC Kick out style oil pan for 67-69 camaro/firebird $45.00 410-882-4533
[ Post a Reply to this Message ][ Edit | View ]
Replies:
2.5" Flowtec cut-outs.....New never installed, slightly scratched up form rolling in toolbox. $50 TYD -- DougG, 15:38:59 08/24/11 Wed
[ Post a Reply to this Message ][ Edit | View ]
Victor Jr 454O intake -- BadRatitude 57, 18:29:27 08/08/11 Mon
want to sell Edelbrock Victor Jr 454 O alum high rise, single plane 4150 intake. Used about a week. Going with a blower. 180.00.Also have a set of 5:13 gears for 9 " for 100.00 Call 443-655-5898
[ Post a Reply to this Message ][ Edit | View ]
Replies:
2001 polaris scrambler 400 2x4 real good condition newer top end only 40 hours old, bored to 85mm,epi clutch kit,hsp pipe,new chain and sprockets,aluminum bumper,new stator and battery. runs real strong and not abused adult owned. only reason for sale is i bought a 4 wheel drive polaris and no longer need this one. clear title in hand-1800.00 obo -- hillbillyhobart, 07:11:25 08/08/11 Mon
[ Post a Reply to this Message ][ Edit | View ]
**FOR SALE TH350 Transmission** -- Terry, 18:25:58 08/03/11 Wed
manual valvebody forward excellent condition less than 30runs and no street mile $350obo call 240-304-2347
[ Post a Reply to this Message ][ Edit | View ]
Replies:
used GM 8.5 ten bolt 3.73 gears......$50 -- "BSR", 17:00:04 08/03/11 Wed
410-588-6230 leave message
benchseatracin@comcast.net
[ Post a Reply to this Message ][ Edit | View ]
Replies:
70 nova project,no title but has all vin plates,no front sheet metal,perfect trunk,needs floor and quarter work-1200.00 obo, pair of 68-72 quarters-230.00 obo, 68-72 outer wheel houses-150.00 pair, 68-72 trunk drop offs-50.00 pair, new set of goodmark fenders-450.00 pair, set of 1.6 sbc roller rockers-90.00 obo, aeromotive fuel pump its the red and chrome street pump like new-125.00, perfect rad support for 68-72-60.00, -- doug aka hillbilly hobart 443-945-0088, 06:36:33 08/02/11 Tue
[ Post a Reply to this Message ][ Edit | View ]
68 Camaro and other SBC parts -- EC, 09:38:18 07/26/11 Tue
I'm selling my 1968 Camaro, VIN 123. It has a 350 engine(late model) with vortech heads and a Competition cam "mutha thumper cam". The car has a small stall, with spool and 4.56 gears in a 10-bolt rear. It currently ride on chrome rally wheels. Newly install carbon fiber race seats. $6500
And the following:
- new gas tank
- new carpet
- aluminum intake with 4 bbl
- 350 turbo trans with shift kit
- long tube headers
- Harwood fiberglass hood
- stock flat hood
I have other parts that I may sell also. B&M 142 blower, Brodix heads -10 aluminum heads, MSD distributors, aluminum radiator with dual electric fans, MSD dist, new body parts etc.
-MSD 6 AL
-new deck lid
The bad: need drivers door rust underneath and driver side quarter. Both could be repaired or replaced.
[ Post a Reply to this Message ][ Edit | View ]
Replies:
M0TORS 4 SALE 385 built by mancini 205 valves stud girdle vic jr intake lottys goodys 2500 obo/ a 307 with 350 heads 327 crank balnced double rolller alum intake hyd cam 488 700.00 -- 454 motor complete intake to pan 975.00 obo 301 697 8145 or email me tonyarobbie@atlanticbb.net willing meet half way on delivers, 08:36:58 07/24/11 Sun
[ Post a Reply to this Message ][ Edit | View ]
Camaro 73 split bumper R/S PROJECT SALE-TRADE -- ed, 23:56:36 07/16/11 Sat
This is a PROJECT ! All parts I have listed are included but NOT installed ! Title in hand ready to go ! 1973 Camaro R/S Split bumper. The car has had the front sheet metal removed and most of the road debris and undercoat have been removed. All front brackets have been media blasted and POR15 treated, sheetmetal has been stripped, etch and filler primed, {maybe be missing L/F fender} all NEW sheetmetal is made by GOODMARK. Which includes 2 full size 1/4 panels, tail light panel, rear lower valance, 4" cowl hood, exterior rear window deck, 1- rocker panel. Roof and trunk lid have been stripped, etch and filler primed [no body work needed}, extra set of pristine doors have been stripped, etch & filler primed, the dash has never been cut, all window channels are rust free,has several sets of door glass, and rear windsheild but front is cracked, NEW Superior 2" drop spindels, I have boxs & boxs of parts that go along with it, such as NOS tach, right side NOS grille, and much more. The price does NOT include but the new owner has 1st offer to buy at a discounted price a Chris Alston rear frame rail {ladder bars}kit, which includes the bars, mounts, 15 x 14" rims, shocks and springs, I am sure there is more that I am forgeting. BAD NEWS IS this car needs floors and trunk pan. But if your going to tub it, that doesn' matter. Cash price is $2500.00, may trade for BBC Alum. heads, Prefab 9" rear, complete Alum Big bearing bolt threw center section. I am new here so if I have posted this in the worng place PLEASE advise.
[ Post a Reply to this Message ][ Edit | View ]
Replies:
3 NOS bottles -- Joe B, 17:54:03 07/15/11 Fri
Used compucar nitrous bottle with gauge in good working order, Bottle is empty $125 shipped
Used Nitrous Express bottle in good working order, Bottle is empty $125 shipped
Used Blue NOS bottle $125 shipped
Email me for pictures if interested. Can also meet up. I'm In phoenixville PA
[ Post a Reply to this Message ][ Edit | View ]
1970 nova ss 41,000 mile car sell as roller or with mtr and trans 10,800 obo with all or cash and trad offers -- 301 697 8145 robbie pics on rj add 2253976 have more, 08:06:07 07/14/11 Thu
[ Post a Reply to this Message ][ Edit | View ]
Replies:
JASON shoot me an email i emaied talk to u later robbie -- robbie, 23:17:28 07/12/11 Tue
[ Post a Reply to this Message ][ Edit | View ]
61 63 64 65 -- jim, 19:01:23 07/09/11 Sat
steel flat hood with a pro stock fiberglass scoop installed , 2 holes up front for pins , looking to trade for a flat hood or sell for best offer
email me for pics jim-dietsch@comcast.net
[ Post a Reply to this Message ][ Edit | View ]
Replies:
62 63 64 65 nova parts -- jim, 09:53:54 07/09/11 Sat
for sale
small block engine mounts $ 50
2 quarter glass regulators ( working ) $100
rear quarter glass left and right sides $100
hood hinges $50
email me if you want anything jim-dietsch@comcast.net
i live in parkkville (Chris - RJ)
[ Post a Reply to this Message ][ Edit | View ]
Replies:
JASON sent pics let me know email or call me if got them thanks -- robbie in cumberland md, 23:58:07 06/21/11 Tue
[ Post a Reply to this Message ][ Edit | View ]
Replies:
CENTERLINES -- DALE, 12:46:10 05/28/11 Sat
2 15X3.5 CENTERLINES WITH MOROSO TIRES CHEVY BOLT PATERN 225.00 AND 2 15X 8.5 5 BACKSPACE CHEVY PATERN 150.00
[ Post a Reply to this Message ][ Edit | View ]
Replies:
lookin for stock to medium bbc mtr complete heads to pan -- pefer a runner but will look at all 301 697 8145 robbieor email tonyarobbie@atlanticbb.net, 22:49:50 05/24/11 Tue
[ Post a Reply to this Message ][ Edit | View ]
short tail turbo 400 with full manual valve body and 2800 stahl convertor still in my s10 works great just switching to a 5 speed finally 300 or best offer call 443 250 6006 -- mike white thank you mark, 18:17:51 05/15/11 Sun
[ Post a Reply to this Message ][ Edit | View ]
Replies:
GUY WITH MAILBU SW CALL ME OR email me tonyarobbie@atlanticbb.net -- robbie in cumberland md thank lost your number, 20:52:42 05/11/11 Wed
[ Post a Reply to this Message ][ Edit | View ]
Replies:
15x8 Weld Prostars ford bolt pattern -- Jordan Ellison, 12:10:49 05/04/11 Wed
15x8 Weld prostars, 5x4.5in bolt pattern, 4.5in bs, drilled for slicks. Good condition, comes with centercaps. 200$ text or call 443-655-3381 pictures can be taken upon request, located in forest hill.
[ Post a Reply to this Message ][ Edit | View ]
Hotchkis Springs -- DougA, 19:40:10 05/03/11 Tue
Have a pair of Hotchkis rear lowering springs out of a 70 Chevelle,will fit other A bodies.Part #1901 R,$175 at Summit,$80. 443 253 8930
[ Post a Reply to this Message ][ Edit | View ]
FOR SALE front folding bench seat,fits 55-56-57 Chevrolet -- Chris 717-515-1480, 14:54:54 04/27/11 Wed
[ Post a Reply to this Message ][ Edit | View ]
70 Nova $4000 obo or trade or cash/trade -- Robbie, 18:41:29 04/26/11 Tue
tonyarobbie@atlanticbb.net
[ Post a Reply to this Message ][ Edit | View ]
Replies:
Caltrac Bars -- ISEESLOWPEOPLE, 19:48:45 04/25/11 Mon
Looking for a set of Caltrac Bars for a 1967 Chevy II
Call4103923681
[ Post a Reply to this Message ][ Edit | View ]
fiberglass37 ford truck on s-10 frame -- ., 13:08:22 04/24/11 Sun
ford truck on s-10 frame and drive line. it runs and move on its owne power, needs windows and lites hooked up. wiring all their, vintage air, alot of work done can send piccs post your email address
[ Post a Reply to this Message ][ Edit | View ]
Replies:
Nova Cowl Hood -- Dave C, 20:11:07 04/22/11 Fri
For Sale: 1 glasstek bolt on 4" inch cowl hood for 68-72 nova. Excellent condition -- no cracks.300.00 please call 443-253-6660.Thanks.
[ Post a Reply to this Message ][ Edit | View ]
1969 nova ss ? said be nice floor new 1/4 and outer wheels house new taillightpanel need trunk pan but have new one piece good door and fender all good glass rallye wheels/ some new parts for it spings,etc clear tittle some extra parts -- 3,500 obo or cash and trade 301 697 8145 or tonyarobbie@atlanticbb.net will load a pic later, 06:51:23 04/20/11 Wed
[ Post a Reply to this Message ][ Edit | View ]
Replies:
1987 s15 lowered new frame mount and mtr mnts new 350 trans fairly new rad welds stars 3 1/2 and 8 short bed clear title 350 block with 350 tbi mtr -- 1,800 obo or cash and trade 301 697 8145, 12:20:00 04/17/11 Sun
[ Post a Reply to this Message ][ Edit | View ]
Replies:
1967 CHEVY TWO AND 57 CHEVY SEDAN FOR SALE 67 nova many new parts 358 2spd glide 5500 stall all conan barry grant carb 870 202 hump heads doug herbet cam /msd /cowl hood ttml less 150 miles on all parts 12 bolt strange axles next 57 chevy sedan new 1 piece floor new half 1/4s nice fender all in primer all orignal int but need redone clear title good started project lot new parts -- chevy two 9,800 obo or sell as roller and 57 chevy 7,200 obo bought dirt car cash talks or cash and trade 301 697 8145 or tonyarobbie@atlanticbb.net, 08:51:41 04/17/11 Sun
[ Post a Reply to this Message ][ Edit | View ]
Replies:
FOR SALE: 16'open deck trailer with 4 wheel brakes.Has box on front for tools and equipment.Overall in good condition but could use some T.L.C. $1000.00 -- 717-246-0919, 22:55:01 04/16/11 Sat
[ Post a Reply to this Message ][ Edit | View ]
Replies:
69 nova -- $6,500 obo, 09:43:36 04/12/11 Tue
69 NOVA: new quarter panels and outer wheel house, front fenders, inner fenders, cowl hood.filler panel, new trim : hood molding, hood emblem, eyebrows, front and rear bumpers, new interior: back seat cover, bucket seats recoverd ( 68 camaro ) carpet, sile plates, door handles, dashpad, stock doorpanels are in good shape. needs a headliner. has a 350 motor with mild cam, 350 auto trans, full exhaust with headers and flow masters, 10 bolt rear posi. polished center line wheels and new tires, the whole car is black primmer and wouldn't take much to paint, everything listed is instaled. car is a driver. has alot of time and money spent. $6,500 obo
[ Post a Reply to this Message ][ Edit | View ]
Replies:
WHEEL DOLLIES BRAND NEW STILL IN THE BOX TWO PAIRS $150.00 FIRM CALL WAYNE 410-916-4406 LEAVE MESSAGE -- DEUCE WAS LOOSE, 18:52:07 04/06/11 Wed
[ Post a Reply to this Message ][ Edit | View ]
Replies:
For Sale: -- 717-683-2933, 20:08:58 04/03/11 Sun
82-93 S-10/Blazer stock flat hood.Nice condition...$40.00
7.625/7.5 spider gears for open rear with 28 spline axles....$20.00
3.5" to 3" weld on exhaust reducers....$20.00 pr.
[ Post a Reply to this Message ][ Edit | View ]
1967 CAMARO ROLLER FACTORY AT ON COLUMN -- 3800 OBO OR CASH AND TRADE SOME NEW PARTS PROJECT CAR 301 697 8145 OR tonyarobbie@atlanticbb.net clear title, 23:52:50 03/31/11 Thu
[ Post a Reply to this Message ][ Edit | View ]
Replies:
New K&N air filter - 9" - 2 3/4" high. $20.00. Valvoline VR1 20W-50 racing oil. Close to a case - $2.00 a quart. 410-937-5494 -- Big Rick, 08:30:03 03/31/11 Thu
[ Post a Reply to this Message ][ Edit | View ]
LOKIN FOR A ENCLOSED TRAILER 18 FOOT AND LONGER GOING DIRT RACIN AGAIN -- EMAIL ME tonyarobbie@atlanticbb.net or 301 697 8145 will travel thanks show me all, 08:12:42 03/27/11 Sun
[ Post a Reply to this Message ][ Edit | View ]
1997 GMC Surburban 2500 4X4, 454, 60,000 original miles. Power everything, leather seats with 3rd row seating, rear barn type doors. Pics and more info available on Craigslist and also Ebay ad #270723477710. -- 10secondranchero Michael, 20:31:02 03/20/11 Sun
[ Post a Reply to this Message ][ Edit | View ]
Replies:
69 NOVA -- & 70 NOVA, 22:13:13 02/08/11 Tue
69 NOVA: new paint, trim, bumpers, exhaust, ss wheels, the list go's on. it does need a interior kit.
70 NOVA: roller project. has solid floors & trunk, fender doors. needs half quarter.complete bucket seat interior needs redone.$3,000 OBO
[ Post a Reply to this Message ][ Edit | View ]
Replies:
WELD DRAGLITE WHEELS & MICKEY THOMPSON TIRES TWO 15x4 WITH 26x7.5-15 5on4.75 BOLT PATTERN FRONT RUNNERS LIKE NEW AND TWO 15x15 5on4.75 BOLT PATTERN WITH A 7.5 BACKSPACE WITH M/T 33x21.5-15 TIRES THE RIMS ARE LIKE NEW TIRE HAVE GREAT CENTER TREAD BUT THE USUAL WORN SIDE TREADS ASK $1,200 CALL WAYNE AT 410-916-4406 LEAVE MESSAGE I WILL RETURN ALL CALLS -- DEUCE IS LOOSE, 16:41:36 12/03/10 Fri
[ Post a Reply to this Message ][ Edit | View ]
Replies:
CHEVY II PARTS FOR SALE 66/67 NOVA KICKPANELS WITH PIONEER SPEAKERS CUSTOM MADE BRAND *NEW* $200.00 PAIR ALSO NEW HOOD HINGES CHROME PLATED $350.00 66 SS REAR QUARTER MOLDING CLEAN USED $100.00 PAIR CALL WAYNE AT 410-916-4406 LEAVE MESSAGE I WILL CALL YOU BACK -- DEUCE WAS LOOSE, 17:21:23 11/05/10 Fri
[ Post a Reply to this Message ][ Edit | View ]
Replies:
1966 CHEVY NOVA SS L30 4SPD CAR, HAS A NEW ZZ430 GM CRATE MOTOR WITH TON'S OF CHROME, NEW TCI 350 TURBO SUPER STREET FIGHTER TRANS & CONVERTER, 12-BOLT 373 RICHMOND GEARS W/ALBURN SERIES# 3 CARRIER,DUTCHMOND AXLES, 3" FLOWMASTER EXHAUST,CENTERLINE POLISHED AUTODRAG WHEELS WITH MICKEY THOMPSON PRO TIRES, COMP ENGINEER CHROME TRACTION BARS & WHEELIE BARS, HARWOOD HOOD SCOOP, EXTERIOR COLOR INFERNO RED PEARL (SIKKENS PAINT) INTERIOR OEM STYLE FAWN WITH AUTOMETER GAUGES, HURST SHIFTER.........LOTS OF CHROME, THIS CAR WON 2001 & 2002 SUPER CHEVY STREET CLASS AWARD AT MAPLE GROVE, CAR WAS RESTORED IN 2001 WITH LESS THEN 5K SINCE RESTORATION ASKING $28,500 CONTACT ME BY EMAIL AT CHEVYNOVA2SS@AOL.COM SERIOUS INQURIES ONLY PLEASE , PS I HAVE OWN THIS CAR FOR 15+ YEARS, I HAVE SPENT OVER $50K + ON THIS CAR SINCE I HAVE OWN IT, I'M SELLING THIS ONLY SO I CAN PURCHASE , ANOTHER NEW TOY !!!!! ALSO I FEEL THE ASKING PRICE OF THIS CAR IS VERY FAIR FOR THE PRICE I SEE ON SOME OF THESE CARS. -- DEUCE IS LOOSE.......TIME FOR A CHANGE, 10:12:00 12/06/09 Sun
[ Post a Reply to this Message ][ Edit | View ]
Replies:
If you see the back of this....
your slower than 9.88's..LOL!
~:DISCLAIMER:~ This site is owned and maintained by Mark Preston. All comments & opinions are soley for entertainment purposes only,and in no way reflect or condone any illegal activity/s.Thank you for visiting & viewing BSR-CLASSIFIEDS.com!
[ Contact Forum Admin ]
Forum timezone: GMT-5
VF Version: 2.94, ConfDB:
Before posting please read our privacy policy.
VoyForums(tm) is a Free Service from Voyager Info-Systems.
Copyright © 1998-2012 Voyager Info-Systems. All Rights Reserved.
|
|
the WEEK" 
(NT) -- Robbie 301-697-8145, 09:10:16 04/28/12 Sat
(NT) -- S10, 14:54:03 03/02/12 Fri
(NT) -- Monte Carlo SS, 13:55:02 02/09/12 Thu
I LIKE IT! (NT) -- ”BSR”, 16:38:40 02/14/12 Tue
, 14:17:41 02/09/12 Thu
(NT) -- 14 inch rallys, 19:32:58 01/23/12 Mon
(NT) -- 1977 Camaro, 17:43:06 01/19/12 Thu
(NT) -- Seats, 20:37:00 01/05/12 Thu
2001 Impala inspected $4000 obo Ad here:http://baltimore.craigslist.org/cto/2687686618.html -- Adam Stelmack- 443 528 4474, 23:34:18 11/05/11 Sat 
nova -- charlie, 19:31:21 05/15/11 Sun
, 00:12:02 04/24/11 Sun
, 18:38:08 04/26/11 Tue
(NT) -- 301-697-8145, 10:56:51 04/04/11 Mon
(NT)