VoyForums
GIVE FREE FOOD
www.TheHungerSite.com
-> Click Here <-
Fund Free Mammograms with a Click
www.TheBreastCancerSite.com
-> Click Here <-
Non-profit ad served by VoyForums...

VoyUser Login optional ] [ Contact Forum Admin ] [ Main index ] [ Post a new message ] [ Search | Check update time | Archives: 12345678[9] ]


Ottawa Valley Old Sledheads Classified Section


Ottawa Valley Old Sledheads
Welcome to The classified section of the
Ottawa Valley Old Sledheads Website.
Use this section as often as you want.
POSTING TIPS
Please post the general area you are in and your preferred method of contact.
To send an email to respond to an ad, please click on the name of the person who posted the ad and you will be given their email address so you can contact them directly.


Click here to return to our Home page.
WANTED -- Brian, 19:10:54 12/27/14 Sat

In need of a 1967-69 artic cat PANTHER suspension- will be at the oldsled heads show and swap-this suspension has 3 idler wheels at the front of the suspension.


[ Edit | View ]



wanted -- brian, 15:52:47 12/18/14 Thu

1969 artic cat sliders-NEW-or where i can get them.


[ Edit | View ]

Replies:

[> Re: wanted -- Yvan, 18:36:36 12/18/14 Thu

http://www.arcticrestoration.com/


[ Edit | View ]

[> [> Re: wanted -- Brian, 19:04:45 12/27/14 Sat

thankyou!!


[ Edit | View ]



YAMAHA SR 292 -- JEFF, 17:44:26 12/27/14 Sat

1973 YAMAHA SR 292 VERY HARD TO FIND IN THIS SHAPE, $7000. OBO. MAY CONSIDER SOME TRADES.


[ Edit | View ]



Northstar Razor Skis for Sale -- Mark, 06:20:49 12/27/14 Sat

I have a set of brand new Northstar Razor racing skis for sale for $500 never been mounted. This includes skis and springs , but no carbides or saddles!
I live east of Ottawa so you can pick them up here .


[ Edit | View ]



1976 340 sno twister -- Roger, 05:51:29 12/27/14 Sat

1976 sno twister 340 many new parts asking $4500.00


[ Edit | View ]



sasch 340ss 290ss 293cc -- Jesse, 07:17:32 12/20/14 Sat

Looking for a good single cylender to put into a vintage sled. I have a carburator for trade and money if you want.

call Jesse at 613 432 5457

or email me that is ok too.

Thanks in advance.


[ Edit | View ]

Replies:

[> Re: sasch 340ss 290ss 293cc -- Skidoosophe, 14:55:27 12/25/14 Thu

I saw a few Sachs singles for sale on Shaun's website. Check it out:

https://sites.google.com/site/snowmobilesandultralightsparts/home/antique-snowmobile-parts/engines/sachs


[ Edit | View ]



looking for 1978-1980 yamaha enticer 250 muffler/expansion chamber -- sam poole, 18:39:10 12/13/14 Sat

i am looking for the muffler off of a 1977-1980 yamaha et 250 in perth/ carleton place area. please email for quickest response. thanks


[ Edit | View ]

Replies:

[> Re: looking for 1978-1980 yamaha enticer 250 muffler/expansion chamber -- Skidoosophe, 14:44:56 12/25/14 Thu

There is one here:

https://sites.google.com/site/snowmobilesandultralightsparts/home/antique-snowmobile-parts/mufflers---pipes

Keep scrolling down the page


[ Edit | View ]



snowmobile salvage yards -- sam, 09:30:42 12/20/14 Sat

is there a snowmobile junk yard I know there ws one around kempville but cant remember the name


[ Edit | View ]

Replies:

[> Re: snowmobile salvage yards -- Faron, 11:09:15 12/20/14 Sat

Have about 50 machines in my back yard. What are you looking for? My phone number is 613-652-4127. The one at Kemptville is Lyle's Small Engines. Phone number there is 613-269-4997.


[ Edit | View ]

[> Re: snowmobile salvage yards -- chris, 08:27:40 12/21/14 Sun

Snow city...kars.ont. dilworth rd..right off the hwy 416 exit....10 min from Kemptville.


[ Edit | View ]

[> Re: snowmobile salvage yards -- Skidoosophe, 14:32:37 12/25/14 Thu

There is also a snowmobile salvage yard online. Right here:
www.snowmobiles-ultralights-parts.com


[ Edit | View ]



1963 bomb light / engines for sale/ looking for contact at oralia ont/ -- Sylvain (Sylvain.gagnon@bell.net), 04:14:05 12/23/14 Tue

,looking for tincab parts any shape rusted ect i have a lot of. Interested things to exchange ,looking for broken sleds Year 200 to 2006. Exchange for old stock , I have jr snoprince engine 180. And a nes 246 - also 2 x 338 rare hirht- rockwell rare 340 hd engine - tnt s. Engine ,restored - pistons. Wiseco sasch 370--120 over , ! Looking for 66 skidadler. I need a contact with someone from oralia who wil come to quebec in coming month ,- you can follow us on facebook on our page some pictures at. Mini moteur 2000 inc. Thanks


[ Edit | View ]



Re: hirth 338 -- Brent, 14:18:36 12/19/14 Fri

Just wondering if you still have 338 Hirth motor for sale?


[ Edit | View ]

Replies:

[> Re: hirth 338 -- Sylvain (French english), 04:04:30 12/23/14 Tue

I have one. 338. Whd carb w electr starter and anoter one i dont remooved the hed of thesecond ,


[ Edit | View ]



Need a contact. From oralia ontario -- Sylvain (French english), 03:48:45 12/23/14 Tue

Hi i need a. Contact from a people who live in oralia or near. And who is supposed to come in quebec. For chrismas or in commng month , please contact me. thanks sylvain


[ Edit | View ]

Replies:

[> Re: Need a contact. From oralia ontario -- Sylvain (French english), 03:58:38 12/23/14 Tue

Tnt shortblock engine shortblock. 340cc. Hd model polished opening 425. --- complete tnt 292 nice engine. New bearings. L ring piston 575.- nice small bomb. Plastic caryboose unbroken 599.00- hirht 300 engine. 68 model $425.- jlo /252/ alouette engine in good shape. 1968 have newer recoil 600.00--- kohler k161 engine with optional electr generator starter. Its with small clutch. ,supposed to come from. Ols 63 polaris autobogan or old cat.//it is not from Bombardier /: 1500.$- very rare I bought a lot of motoski nos parts. You can see some picture on my facebook page at. Mini moteur2000inc thanks sylvain


[ Edit | View ]



Looking for track for a 1970 Snow Cruiser model 200 -- Andy, 09:12:29 12/08/14 Mon

The track is 15 inches wide and about 121 inches long and has steel cleats. I'm also looking for the front and rear sprockets, for mine are very worn and chipped and I think that is how I blew my old track for it came off the front sprocket and added too much pressure, than bang off it came.

If nothing than does anyone have experience building a track. I was thinking of using 2-ply conveyor belt $90, U-channel steel from Pempco Steel in Pembroke for $75 and 3/8” rivets from Ottawa Fastener Supply for $25. Do you think that this would be better than to use a 44-year old track or would I be wasting my money?


[ Edit | View ]

Replies:

[> Re: Looking for track for a 1970 Snow Cruiser model 200 -- Tom (TnT Tom), 20:28:59 12/08/14 Mon

Hi, how a brand new track sounds like ? I had fix an old Snow Jet and planning to do it on my Snow Cruiser... 1st : buy a new Camoplast #9755t ( Ski-doo Olympic, Elan,...) 2nd get a front axel (or a complete machine !)from a olympic 1975 or newer, with bogie wheels (slider is wide sprockets) the axel is the right with... after install... and enjoy your machine for an other 40 years !!! Tnt Tom, 819 876 7235 day (info or parts !)


[ Edit | View ]

[> [> Re: Looking for track for a 1970 Snow Cruiser model 200 -- Andy, 23:32:40 12/21/14 Sun

I got a new track, and the old front sprocket teeth are chipping off very easily, thus I checked online and this is common for it is quite old and I should replace them. I've been checking online and the Kimpex part number is 04-102 and costs around $40 in Canada. In the US it costs just about $25 and our current dollar is 16 cents on a dollar. I don't like to order from the US because the customs and shipping kills me. Once I bought $98 worth and it cost me $78 extra just to get them which was purchased from Parts Reloaded. But the prices in Canada suck. Does any one know where I can get the part I need for a fair price. I'm getting a little frustrated here...


[ Edit | View ]



Looking for a few restored sled to add to collection -- Patrick Vaillancourt, 14:18:11 12/04/14 Thu

Good Day
Looking for a restored sled ( No Bombardier )
Must be in excellent condition, new paint & decals etc...
Please send me pics with pricing at pv@lmsford.com
Thanks


[ Edit | View ]

Replies:

[> Re: Looking for a few restored sled to add to collection -- Mike, 18:32:01 12/20/14 Sat

How about a 1971 Skiroule RTX
Completly restored.
Let me know and I can send some pics.
Thanks.


[ Edit | View ]



excel3 -- denis, 16:44:53 12/20/14 Sat

looking for hood for86 Yamaha excel 3 thank you


[ Edit | View ]



Wanted Polaris TX Parts -- Wayne Kinney, 21:20:40 12/10/14 Wed

I am looking for a cleated track and a head light assembly for a 1976 Polaris TX 440 Thanks for any help


[ Edit | View ]

Replies:

[> Re: Wanted Polaris TX Parts -- Yvan, 19:03:52 12/11/14 Thu

I have a brand new track for your TX. $400


[ Edit | View ]

[> [> Re: Wanted Polaris TX Parts -- Brian, 15:39:31 12/18/14 Thu

i have a used one $35


[ Edit | View ]



L/F 1971 Bombadier Olympic 335 Hood -- Kevin Bradford, 19:56:58 12/16/14 Tue

I'm looking for a hood for a 71 Olympic 335.

Also looking for:
track
trunk
carb shield with spring

I'm in Ottawa

613-859-1687


[ Edit | View ]

Replies:

[> Re: L/F 1971 Bombadier Olympic 335 Hood -- brian, 15:34:17 12/18/14 Thu

i have parts for your sled-email me off line.


[ Edit | View ]



WANTED A YAMAHA VMAX 540 -- Brent, 06:21:16 12/06/14 Sat

I AM LOOKING FOR A YAMAHA VMAX 540 1983-1991 DOES NOT MATTER ON THE YEAR WILLING TO PAY UP FOR ONE THAT IS MINT OR RESTORED HAVE CASH THANKS Brent 705-333-2256 or email brentwas@bell.net


[ Edit | View ]

Replies:

[> Re: WANTED A YAMAHA VMAX 540 -- JUSTIN, 13:45:15 12/16/14 Tue

HI I HAVE A FRIEND WHO HAS ONE BUT IT NEEDS RESTO WOULD YOU STILL BE INTRESTED?


[ Edit | View ]



Seat wanted -- Mike, 11:16:55 12/16/14 Tue

I am looking for a seat cover and backrest cover for a 1969 nordic that i am restoring. Any suggestions. Thanks


[ Edit | View ]



Skidoo Olympic 1971 -- Phil, 10:12:15 12/02/14 Tue

Hi - I am stripping the body of a 1972 Olympic 399 and rebuilding a 1971 Olympic 300 using the parts that are transferable. Have run in to some considerable rust on top of the tunnel. Seems common for this sled. Anyone had any experience/tips in how to rebuild the seat and attach it given the rust? Would love some advice if something has worked for others. philippietersma@hotmail.com


[ Edit | View ]

Replies:

[> Re: Skidoo Olympic 1971 -- Andy, 08:52:48 12/08/14 Mon

That is the worst place for rust due to the moisture from the wood under the seat. I had to do this repair about six times and found best to use a piece of flat metal that I cut from an old furnace oil tank. The piece I use is a little thicker, but it could use extra strength there. I just go to the dump, give them a story and ask if I can cut out a chunk with a reciprocating saw. Then I use a small mig welder with flux cored wire; you can get that at Canadian Tire for a good price on sale. Cut-out where you need to weld, set the new piece and weld all around. Please note that sometimes you have to stop and go because there may still be some thinner areas still in the tunnel, thus it might look a little rough, but just put on another pass if it looks awful and grind off the access. After you are done use a wire wheel on the grinder (not drill for it is too slow); then prime and paint. It takes a bit of work, but if you like to tinker on stuff like most of us do than you won’t mind at all. Depends on how good you are at welding, but nobody would know you did major body work unless they really stared and examined the area effected. Also for those clips for the seat; they can be welded on too; if you go to almost any hardware store you can but six feet of flat steel at 1-inch wide and 1/8-inch thick, put it in the vice and bend it to the desired shape and cut. Best of luck…


[ Edit | View ]

[> Re: Skidoo Olympic 1971 -- Phil, 08:15:37 12/16/14 Tue

Thanks Andy. Great advice and much appreciated.


[ Edit | View ]



Rupp/Arctic Cat/Ski doo -- Bryan, 19:29:46 12/15/14 Mon

I have a 1971 Rupp Magnum Fan Cooled wide track HOOD only professionally restored and painted with decals applied for 440 and comes with Brand new windshield $600.00 I have a 1974/75 Arctic Cat Cheetah tunnel track suspension chain case and steering only track good $ 100.00 I have a dual carb intake for a 775 Rotax engine glass beaded $ 100.00 Call Bryan @ 519-353-4136 or email


[ Edit | View ]



JLO Muffler Wanted -- jesse, 05:56:05 12/13/14 Sat

Looking for a JLO 148cc muffler.
for a model 200A hus-ski 1962-1964

please call 613 432 5457 or email me.

Thank you


[ Edit | View ]



SCORPION---featured show sled -- Jim Latino, 12:19:30 12/10/14 Wed

15th annual Great Eastern Whiteout
vintage show/swapmeet/Snow Ovals/Bun-Bun 100/Ice Drags/Trailride.
WWW.THEGREATEASTERNWHITEOUT.NET
fEB. 13,14,15TH 2015
Fulton War Memorial
609 west broadway
Fulton,ny 13069 (30 minutes north of Syracuse)
****Come enjoy a full weekend filled with Vintage events!!!!


[ Edit | View ]



renfrew area -- jason, 10:55:43 12/10/14 Wed

i'm in renfrew area!!! thanks


[ Edit | View ]



curious -- jason (wondering), 10:52:57 12/10/14 Wed

could some one tell me what size of track would be on a 1989 470 formula mxlt . and where would be a good place to buy 1. thanks


[ Edit | View ]



1977 SS 440 top end -- John, 08:46:33 12/09/14 Tue

For sale a 1977 Ski-doo SS 440 SnoPro Top end, comes with 2 used std Elko pistons and rings, one nice original cylinder, one freshly reniked cylinder, and nice head.For more info and price drop one j off of email address.


[ Edit | View ]



Snodeo in Old Forge NY -- Terry, 18:40:27 12/08/14 Mon

Just wondering anyone has visited the snodeo vintage sled show in old forge ny or has any info.(good,bad, small,large).


[ Edit | View ]



1973 Polaris Charger -- Michael, 12:22:51 11/17/14 Mon

Rare 1973 Polaris Charger 285 cc dual carbs, runs good, all intact would be a great restoration project for someone,great little machine $400.00 text or call 613 281 2408


[ Edit | View ]

Replies:

[> Re: 1973 Polaris Charger -- dave smeaton, 10:59:36 12/08/14 Mon

Im ntrested in your Polaris if your not too far away! Im in Ottawa or Arnprior to be exact where are you .Also is the track any good. Thanks


[ Edit | View ]



634 Hirth -- Dan, 07:16:23 12/08/14 Mon

Wanted to buy a complete 634 Hirth twin or good crankshaft assembly. Cash purchase or maybe have something to trade of interest. Phone or text
519-477-1110, or e-mail dan50881086@yahoo.ca


[ Edit | View ]



ESKIMO -- Carl Hamlyn, 18:26:34 12/07/14 Sun

looking for a windshield or other parts or accessories for a 1970 Eskimo 290M also for a 1969 Homelite Foster.

Please email if you have anything.

Thanks


[ Edit | View ]



Elan Fule Tank -- Jason, 14:26:54 11/30/14 Sun

Looking for a fuel tank for a skidoo elan. I am retro fitting it in a 68 Olympic.

Located in ottawa.

Thanks Jason


[ Edit | View ]

Replies:

[> Re: Elan Fule Tank -- jesse, 16:33:32 12/01/14 Mon

Give "sauce" a call at 613 735 6269


[ Edit | View ]

[> [> Re: Elan Fule Tank -- Brian, 19:24:31 12/04/14 Thu

i also have one, no leaks-email of line


[ Edit | View ]



1968 Olympic Driveshaft right side bearing retainer. -- Jason, 07:04:03 12/02/14 Tue

Looking for a Driveshaft right side bearing retainer. For a 1968 Olympic.

Thanks.
Jason


[ Edit | View ]

Replies:

[> Re: 1968 Olympic Driveshaft right side bearing retainer. -- Brian, 19:22:43 12/04/14 Thu

i have one- email me off line at snopro79@yahoo.ca


[ Edit | View ]



Tillotsen HR3A -- jesse, 15:29:49 11/17/14 Mon

Wanted to buy a tillotsen carburator to fit a 300 cc.

Please let me know what you have?

Thank you

Call Jesse at (613) 432-5457


[ Edit | View ]

Replies:

[> Re: Tillotsen HR3A -- jesse, 15:41:25 11/17/14 Mon

I meant to say, I am looking for a Hr Carburator to fit a Hirth 300. Thanks.


[ Edit | View ]

[> [> Re: Tillotsen HR3A -- Phil, 10:05:54 12/02/14 Tue

I have 2 extra tillotson's...both off 399 engines. Send me an email if you still need something. I want to keep one I think. philippietersma@hotmail.com


[ Edit | View ]



15th annual Great Eastern Whiteout---Hotel Info -- Jimmy Latino, 10:22:29 11/30/14 Sun

Riverside Inn
930 south first street
Fulton,ny 13069 (across the river from whiteout)
315-593-2444

RFH'S Hideaway (Motel/Restaurant)
rt. 57&Bankrupt Road
Phoenix,ny 13135
315-695-2709 (same place Friday's party is at)
***Located south of Fulton---about 10 minutes away.
WWW.THEGREATEASTERNWHITEOUT.NET
Vintage show/swapmeet/Snow Ovals/Ice Drags/Vintage trailride and just added---BUN-BUN 100 ENDURANCE RACE(SUNDAY)


[ Edit | View ]



polaris tx -- joe, 16:07:22 11/28/14 Fri

looking for a polaris tx or txl parts sled i need a steering shaft


[ Edit | View ]

Replies:

[> Re: polaris tx -- willie, 08:50:23 11/30/14 Sun

yes i have 819 647 5844


[ Edit | View ]



1973 Polaris Charger -- Michael, 11:31:58 11/14/14 Fri

I have a 1973 Polaris Charger 285 dual carb snowmobile all intact,runs well,track isnt the best,very rare would be a great restoration project for someone great little machine


[ Edit | View ]

Replies:

[> Re: 1973 Polaris Charger -- roy allaire, 21:21:18 11/24/14 Mon

j`aimerais voir des photos et votre adresse,418 549 6435


[ Edit | View ]



Athen's Show - Thanks ! -- Kevin, 16:37:18 11/22/14 Sat

Many thanks to the Organisers, Volunteers and Sponsors of the Athens Old Snowmobile Show for a great day !

Kevin
OVOSH


[ Edit | View ]



75 vintage snowmobile tracks -- Gates, 20:33:42 11/19/14 Wed

75 vintage sled tracks for sale. Tracks vary in condition from fair to just like new. Tracks include Arctic Cat cleated, Polaris cleated, involute solid rubber without cog holes, Ski-Doo, Snow Cruiser and many more. Asking $250.00 for all.(less than 4 dollars per track). All tracks must go in one shot.


[ Edit | View ]

Replies:

[> Re: 75 vintage snowmobile tracks -- Tim (Happy), 14:53:32 11/22/14 Sat

Where are you located?


[ Edit | View ]



62 tincab chasis -- Todd, 16:06:35 11/20/14 Thu

I have a 62 tincab chasis, no vin tag has skies, no suspension or track,has steering bar and chaincase with clutch,thinking on selling trying to figure out a reasonable price, what do you think guys.


[ Edit | View ]

Replies:

[> Re: 62 tincab chasis -- ron fullerton, 16:26:21 11/20/14 Thu

im looking for a 62 steel cab skidoo i will give you 500 for it if the chasis is not rotten. let me know thanks ron


[ Edit | View ]

[> [> Re: 62 tincab chasis -- Todd, 18:39:31 11/20/14 Thu

Will keep you in mind Ron thanks for the offer.


[ Edit | View ]

[> [> [> Re: 62 tincab chasis -- Tommy (TnT Tom), 07:36:55 11/21/14 Fri

Would you like a trade ?? I have many interesting goodies...Call me if you are interested...819 876 7235 day or 819 868 2419 home, Thanks, Tommy.


[ Edit | View ]

[> [> [> 62 ski-doo -- ron, 06:25:38 11/22/14 Sat

the 62 skidoo i have the previous owner had cut the cowl in half and put a big hinge onit so it opens up. he also did a terrible job trying to repair the gas tank. can you give me a call if you are interested in selling it im interested in it. i have a few tradable items also. thanks ron. 16037472665 cell16037287228


[ Edit | View ]

[> Re: 62 tincab chasis -- Sy'vain, 13:22:37 11/22/14 Sat

tod. Its sylvain about the 62. Call me p'ease. 4508898069 byeC


[ Edit | View ]



wanted -- louie kawa, 16:38:33 11/21/14 Fri

wanted chaincase for 61 skidoo tin cab


[ Edit | View ]



Vintage Snowmobile Show and Flea Market -- Old Hastings Snow Riders, 08:11:40 11/21/14 Fri

Old Hastings Snow Riders
Vintage Snowmobile Show and Flea Market
Sunday November 30th 2014 9am-2pm
26456 Hwy 62 L'amble (just south of Bancroft)
BRING YOUR ANTIQUE AND CLASSIC SLEDS TO SHOW!
Flea Market spaces $15 Some inside spaces $25.
for more info contact Steve Stapley 705-653-6919
modeltdr@sympatico.ca
FOOD AVAILABLE
PERMITS AVAILABLE. REGULAR AND CLASSIC!


[ Edit | View ]



Great Eastern Whiteout---hotel info -- Jim Latino, 06:23:04 11/21/14 Fri

15th annual Great Eastern Whiteout--Feb. 13,14,15th 2015
Vintage show/swapmeet/Racing and Trailride

Riverside Inn
930 south first street
Fulton,ny 13069 (across town from the show grounds)
315-593-2444

RFH'S Hide-away Motel/restaurant
rt. 57& Bankrupt road
Phoenix,ny 13135 (10 minutes south of Fulton)
****same place Friday's party is at******
315-695-2709

WWW.THEGREATEASTERNWHITEOUT.NET


[ Edit | View ]



Main index ] [ Archives: 12345678[9] ]
[ Contact Forum Admin ]


Forum timezone: GMT-6
VF Version: 3.00b, ConfDB:
Before posting please read our privacy policy.
VoyForums(tm) is a Free Service from Voyager Info-Systems.
Copyright © 1998-2016 Voyager Info-Systems. All Rights Reserved.